Question about 1993 Toyota Land Cruiser

1 Answer

The back driver side window won't roll up all the way, but will role down. how do i fix it 1993 toyota land cruiser

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

If the car has power windows,the problem might be the window motor.going down it does not use that much force as to when it goes up.so maybe its overheating and will not work good enough to roll it all the way up.the way i check and see if the motor is going bad is to let the window up as far as it will go,then leave it alone for 10 or 20 minutes,then try to put it up again,but only go up.DO NOT go down then up again.if the window closes all the way,then i would change the window motor cause it will be going out completely soon. hope this solves your problem because it has for me many times,take care. manny

Posted on Feb 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Driver side Glass scratches after rolling down or up


Drivers window usually gets much mre use than the others, so some internal part is worn or has come loose. If you know how to remove door panel you may be able to figure out what is wrong, or get a body shop to fix/adjust the glass.

Oct 18, 2016 | 2015 Toyota Land Cruiser

1 Answer

My elerctric windows on my 1988 toyota landcrusier wont go up or down on all windows except drivers side and i checked the fuse it was good and there is power going to all the doors


Is the window lockout on? All of the ground wires come through the drivers switch, so its either that or a bad ground cluster or corroded wires. Those vehicles are known for electrical gremlins...

Jul 11, 2016 | 1988 Toyota Land Cruiser

1 Answer

Why do the horn on my 1997 land cruiser blow with out me blowing it


Mean it has dirty connections on the on the horn, remove the connections and spray some sort of cleaning spray like Wd-40.

Jan 16, 2015 | 1997 Toyota Land Cruiser

1 Answer

I have a 93 land cruiser that won't start. The


Did you try jumping it off with another car?? It sounds like it may have a loose ground cable. make sure the battery is good, make sure the cable ends are clean and tight, check ground cable on engine block. Hope this helps you...

May 24, 2011 | 1993 Toyota Land Cruiser

1 Answer

I have an 80 series petrol Landcruiser which requires clutch replacement. When removing gearbox I cannot move gearbox back far enough (fouls on transmission tunnel) for input shaft to clear pressure plate....


Couple of options: You must have truck up at least 24" or higher and trans (according to Rover) has to be rolled to one side. The other option from local gent who works on Rovers suggests losening motor mounts so motor can tilt backwards. They are tight - Either case sounds like alot of work..

Jan 03, 2011 | 1993 Toyota Land Cruiser

1 Answer

Toyota prado side windows code


if the parado has automatic windows and they are not working from the driver's seat then wind down windows from each door and then pull them back up and keep the button pulled up for a few secs, this will reset the controls and the windows would start working from Drivers door, this has to be repeated number of time for each door

Jun 15, 2010 | 2006 Toyota Land Cruiser

1 Answer

Where is the starter located in 1997 land cruiser


IF I REMBER COREC IT IS ON DRIVER SIDE JUST UNDER EXAUST AT BELL HOUSING IF NOT IT WILL BE AT THE OUTHER SIDE IF NOT ON DRIVER SIDE

Aug 14, 2009 | 1993 Toyota Land Cruiser

1 Answer

How do I replace the front rotors on my 1993 Toyota Land Cruiser?


have to pull the whole spindle off to get the rotor off..they come off from the back side...real aggravating

Jun 04, 2009 | 1993 Toyota Land Cruiser

2 Answers

1993 driver side door can not open


The power door lock solenoid on the driver door needs to be replaced.

Sep 18, 2008 | 1993 Toyota Land Cruiser

Not finding what you are looking for?
1993 Toyota Land Cruiser Logo

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...