Question about 1996 Ford Windstar

1 Answer

Picture of the fuse panle and what they r 4 - 1996 Ford Windstar

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

If you need to check a fuse, find the fuse panel for electrical system, wich is located under the instrument panel, and follw these steps:
- Pull down on the fuse panel cover handle
- On the fuse panel, find the number of the fuse you want to check.

Also, more details can find in the Ford Windstar Owners Manual (page 342 and next).

Hope helps with this (remember rated this help) Good luck.

Posted on Feb 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 vw passat the radio will not turn on


Remove radio and check for fuse in the wiring.

Mar 12, 2012 | Volkswagen Passat Cars & Trucks

1 Answer

Fuse panle ford fuses to go to what. the lay out on the fuse panle to what the fuses go to


The fuse panel layout is in the operaters manual in the glovebox,without you will be lost.If you don't have one,get one from the dealer.

Mar 17, 2011 | Ford Focus Cars & Trucks

1 Answer

MY BACK UP LITES DON'T WORK. I CHECKED THE FUSES UNDER THE HOOD, & THEY ALL LOOK OK. I CAN'T SEE THE FUSES INSIDE CAR ON THE KICK PANLES. CAN YOU TELL ME WHAT LOCATION THE FUSE MAY BE THAT IS FOR...


your back up lights run on the gage fuse. the problem is probably with the switch on top of the transmission. The switch looks like the picture below and has 2 cables coming out. Remove the connectors from the switch. Grab the one that only has 3 terminals inside and connect the terminals inside the connector that go to the red and yellow wires using a big paper clip. Turn the ignition key on to see if the lights work. If yes, replace the switch. If not, problem is in the wiring. Please let me know if you have questions.


jturcotte_14.jpg jturcotte_105.gif

Nov 08, 2010 | 1987 Toyota Cressida

1 Answer

I am trying to locate the passenger side fuse panel


Hello
Open the passenger frunt door,, Where the corner of the dash sits out in the open when the door is open there is a small cover here,pull on where you can put a finger in the panle and the panle will come off , The panel snaps back into place,

Jul 16, 2010 | 2000 Dodge Durango

1 Answer

The handle broke off on my 2003 jeep grand cherokee laredo liftgate. how can i open it now? i can't find anything on the inside in the back and my tail light is out.


You will need to remove the interior panle from the loft gate to axess the latch
there is 4 screws along the bottom of the panle to remove then carfuly pull the panle away from the lift gate there is plastic clips that hold the panle to the gate these may need to be replaced when re installing the panle they can be purchased at the jeep dealer.
now look into the lift gate and you will see where the handle rod conects to the latch lift on this rod and the gate will open
to replace the handle remove the 2 10 mm bolts and disconect the rod from the latch install the new handle and rod to the latch install the 2 10 mm bolts. install the panle and 4 screws
this should cover it

Jul 13, 2010 | 2003 Jeep Grand Cherokee

2 Answers

Where is the fuse for the heater on a 1991 toyota pickup. my heater was working when i got out, and the next time i got in, the heater fan would not work. no noise , no nothing


Check the fuse box under the dash, which you may have already done, also check under the hood there is a secondary fuse box and it will list the heater and fuse or it may have a relay for the heater, you my have a bad relay for heater.

Nov 23, 2009 | 1991 Toyota Pickup

1 Answer

Battery is completely dead on my 2000 Porsche 911 C4


on this car you will have to use a batt connected thru the fuse panle you will need to power the side of the panle with the hood fuse then all you will need to do is open the hood

Mar 15, 2009 | 2000 Porsche 911 Carrera

1 Answer

Gauges on 2003 Tahoe quit working, is there a fuse?


there should be a fuse for your gage if you look on your fuse panle it should have labels telling you what fuse run's what.

Mar 11, 2009 | 2002 Chevrolet Tahoe

Not finding what you are looking for?
1996 Ford Windstar Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...