Question about 2006 Ford Crown Victoria

2 Answers

Insrument panel loses power periodically

Insrument panel loses power periodically 2006 crown victoria all gauges stopworking sometimescome back on

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I am also having the same problem with my 2006 Crown Vic.
I've taken the LCM out and put it back in. Still no luck.. Replaced the battery, headlight switch, and ignition switch. replacing the LCM is about $500, any other sugestions to check??

Posted on Mar 05, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 108 Answers

This is just a loose fuse or connector wiggle the connector of the lighting control module just above you gas pedal under the dash.turn lights on try to kick slightly the module(black metal box).Sometimes you need to open it and re apply heat and solder on the relay terminals fixed on the board.

Posted on Feb 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does anybody know what the oil pressure specs for the 2006 crown victoria lx 4.6L at idle and at normal operating temp? Mine is reading between 15 and 25 psi. Has 149,0000 on it.


15 seems low. Ford gives a spec of 40-70 psi with the engine speed @ 2500 rpm engine hot. Most cars I see are around the 25 psi @ idle. If your idle is lower than it should be it will make your pressure lower. This should be a direct reading on a good mechnical engine oil pressure gauge.

May 22, 2015 | 2006 Ford Crown Victoria

2 Answers

Where could I find the coolant drain plug for the engine block on a 2006 Crown Victoria LX vin W. I'm looking for a good place to install a mechanical temperature gauge?


this are is not a good location for a mechanical temp gauge
It is at the bottom of the coolant galley in the block and will be in the sediment that collects in a block
hot water rises and where you want it is where the water will be at the hottest ( bottom of the block is the coolest water) so select a point at the thermostat housing or a plug in the head that goes into the water jacket

May 13, 2015 | 2006 Ford Crown Victoria

1 Answer

Why am i losing power in my 2003 crown victoria


are you losing horsepower or electrical power?

Mar 05, 2015 | 2003 Ford Crown Victoria

1 Answer

Which fuse control the odometer in a 2006 crown victoria


The odometer isn't control but 1 fuse its is fed through the entire IPC "instrument cluster panel " and is part of the pcm feed . you cant turn it off so if its out then your cluster is no good replace the cluster and the miles will return since they are kept by the pcm

Oct 11, 2014 | 2006 Ford Crown Victoria

1 Answer

I have 2006 crown victoria p71 car starts but no accleration


Both codes are for the throttle actuator control, and could have been set when you ran the engine with the component unplugged.
I would have the codes cleared and see if the computer resets the default settings next.

Dec 18, 2012 | 2006 Ford Crown Victoria

1 Answer

2006 crown victoria - no heat


I would change the thermostat in the vehicle first and go from there. Hope this helps......Dan

Jun 20, 2008 | 1999 Ford Crown Victoria

Not finding what you are looking for?
2006 Ford Crown Victoria Logo

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

fordexpert

Level 3 Expert

5572 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...