Question about 2000 Chevrolet Silverado

1 Answer

How to repair turn signal,stoplight for a 1993 Chevrolet silverado

Posted by on

  • dogwood32 May 11, 2010

    Front,rear?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 564 Answers

Ck test light to see if u have power,,then replace tail light bulb assembly,,

Posted on Feb 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where's the po573 sensor on my Silverado 2008


Its your brake light switch which also kills your cruise control

Sep 24, 2015 | Cars & Trucks

1 Answer

Dash guages and information center not working,I do have dash lites


Hi, this is a pretty common problem on these Silverado instrument clusters. We can repair it for you, click here to learn more about these silverado instrument cluster problems: Dr Speedometer Instrument Cluster Repair Speedometer Repair Guage...

Jul 14, 2014 | 2003 Chevrolet Silverado 1500

1 Answer

I have a 2006 Chevy Silverado 1500 Extended Cab 4x4. My question is that when the truck is parked & not running with no keys in the ignition , my brake lights will begin to flash on & off until it drains...


Stop lamp circuit discription

Stop Lamps
The STOP LP 25-amp fuse in the underhood fuse block supplies battery positive voltage to the normally open stop lamp switch. When the driver presses the brake pedal, the switch contacts close and battery positive voltage is supplied to both the STOP 15-amp fuse and the center high mounted stop lamp (CHMSL) 10-amp fuse in the instrument panel (I/P) fuse block, and to the turn signal/hazard module. The turn signal/hazard module then supplies voltage to both of the trailer rear turn/stop lamp supply voltage circuits. The voltage from the CHMSL 10-amp fuse is to the CHMSL and the trailer jumper harness. The voltage from the STOP 15-amp fuse is to the stop lamps, throttle actuator control (TAC) module, and the cruise control.

I think The turn signal/hazard module has something to do with the lights flashing .From looking at a wiring diagram B+ voltage from the STOP LP fuse 25amp in the under hood fuse box supply's the brake light switch , from there it feeds B+ to VEH STOP fuse 15amp and VEH CHMSL fuse 10amp an to stop lamp switch signal to the turn signal flasher module which is suppose to control the trailer stop lights . Do you have a connection for a trailer hook up ?
Remove both LT an RT TRLR fuse's both 10 amp from the I/P fuse block an see if the problem goes away .

Do you tow a trailer ? Check the trailer connector for corrosion !

May 15, 2017 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

1993 chevy silverado parking lamps go of when i turn on headlights, signal lights flicker when i press on brake.


Yes I would look for a ground circuit problem. I would look at the ground wires for the headlights first. Even run a new ground wire for the tail lights to see if it helps.
Could be a ground connection for the body to frame or body to battery.

Aug 10, 2012 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

Brake light not working


THERE IS A FUSE, USUALLY IT WILL BE LABELED STOP. THE ONE THAT SAYS BRAKE MAY BE FOR THE ABS TWO DIFFERENT THINGS. { REPLACE THE STOP FUSE } . IF THE STOPLIGHT SWITCH IS BAD, IT IS NOT EASY TO CHANGE. IF THE TURN SIGNALS ARE WORKING IN THE REAR OF THE TRUCK, THAT MEANS THE BULBS ARE O.K. A BAD TURN SIGNAL SWITCH CAN ALSO KEEP THE STOPLIGHTS FROM WORKING, { LAST RESORT, EXPENSIVE & HARD TO REPLACE }

Dec 28, 2010 | 1996 Chevrolet C1500

1 Answer

Signals and brake lights dim when brakes applied


it could be a bad connection in the stoplight wiring most likely the earth wire check all the wiring connectors to make sure they are plugged in properly.....hope this helps.....cheers

Jul 09, 2010 | 2004 Chevrolet Silverado

Not finding what you are looking for?
2000 Chevrolet Silverado Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...