Question about 2003 Ford Focus

Open Question

Check engine light on found p2008 intake manifold

Check engine light on 2003 Ford Focus 2.3 found p2008 intake manifold runner control stock open bank 1 and p2004 intake manifod runner control stuck open bank 1.

what sensor is it?
descriptions?
how do i fix this?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 449 Answers

SOURCE: ENGINE LIGHT ON SLIGHT LOSS OF POWER AND POSSIBLE RATTLE

p2004 (Intake Manifold Runner Control Stuck Open)You need to take a look at the IMRC actuators on the intake manifold. You can try using a screwdriver or other tool to move the actuators to see if one is stuck in the open position. Do not use your fingers to do this, because if one is open and decides to close it has a bit of force behind it and can injure you. If the IMRC is stuck open, it is usually due to deposits in the intake manifold. Repair involves removing the upper intake manifold and cleaning out any deposits in the IMRC plate area. I would try running some Techron Concentrate in 2 tanks of gas to see if it dissolves enough of the gunk on the plates to free up the stuck one. Certainly a lot cheaper than having to pull the intake manifold and cleaning the plates. Always run tier one gasoline like Shell or Chevron to reduce the buidup of deposits.

Posted on Dec 19, 2008

  • 1114 Answers

SOURCE: Mazda 3, 2004 has check engine light code P2004

bank 1 is O2 sensor mate!

Posted on Jan 04, 2009

warlock61
  • 659 Answers

SOURCE: i have code 1538 on my check engine for 1998 ford windstar ,does

on the passenger side of the engine you will see 2 small metal rods at the top of the engine just below the intake manifold there are little white clips that hold the rods on these clips usually break and the rods come off

Posted on Mar 28, 2009

  • 218 Answers

SOURCE: Check engine light came on

THERE IS A VALVE ON THE RIGHT SIDE OF THE INTAKE MANIFOLD THAT OPEN THE RUNNER.IT HAS A VACUUM LINE TO IT.FOR IT TO BE STUCK OPEN EITHER THE SOLENOID IS BAD,THE VACUUM LINE IS BAD OR THE RUNNER IS GUMMED UP WITH CARBON AND STUCK OPEN

Posted on May 15, 2009

  • 14036 Answers

SOURCE: 1998 ford windstar 3.8 with code p1538. Is this a

LOOKING IN CODE BOOK.POSSIBLE CAUSE TO YOUR PROBLEM THE IMRC COULD BE STUCK OPEN.OR THE IMRC ACTUATOR IS DAMAGED OR HAS FAILED.ALSO THE IMRC MONITOR SIGNAL CIRCUIT COULD BE SHORTED TO POWER GROUND OR SHORTED TO SIGNAL GROUND RETURN.

Posted on Oct 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix code p2004 on 2005 ford focus


you code is here

P2004 Ford Intake Manifold Runner Control Stuck Open Bank 1


Possible causes - Intake Manifold Runner Control (IMRC) monitor signal shorted to power
- Faulty Intake Manifold Runner Control (IMRC) actuator
- Faulty Intake Manifold Runner Control (IMRC) solenoid
- Damage Powertrain Control Module (PCM)
- Blocked vacuum hoses
alt="What does this mean?"> What does this mean? Possible symptoms - Engine Light ON (or Service Engine Soon Warning Light) P2004 Ford Description The P2004 is set when the Intake Manifold Runner Control (IMRC) is commanded closed by the Powertrain Control Module (PCM), but the IMRC indicates open.


Read more: http://engine-codes.com/p2004_ford.html#ixzz3lke1SreV

Sep 14, 2015 | Ford Cars & Trucks

2 Answers

When you have an extremely high idle and code p2008 shows up what could the problem be


Without knowing what car you have it gets difficult to be specific, however since usually p2008 is dealing with intake manifold runner control, and you have a high idle...Id say you may possibly have a loose or broken vacuum hose to runner control...with the vacuum off the runners cant be regulated...and the air leaking in through the bad/open hose will raise idle. check vacuum hoses and runner linikage

Apr 13, 2015 | Cars & Trucks

2 Answers

What does the code p2008 mean on a 2004 ford freestar minivan


Intake Manifold Runner Control Circuit/open bank 1

Apr 13, 2015 | 2004 Ford Freestar

2 Answers

What is the code p2008


p2 is a factory code
that means a ford book is no good for toy'
only the toy FsM WORKS
IM 3000 Miles in to SA,. no books
but 5 seconds google finds this, see this?

Toyota P2008 OBD EOBD JOBD Vehicle DLC Code Lookup Toyota Intake Manifold Runner Control Circuit/Open.

on modern engine with have this feature(pain)
as solenoid operated ,runner volume switch.
its sticking or bad.
the http://www.helminc.com/helm/search_service_owner.asp?Style=helm&class_2=TOY

FSM covers the tests.

or alldata.com
as with all things like this
inspections, ahh its unplugged, or smashed or melted>
its sticking
the coil measures open
per FSM











Jan 08, 2015 | 2010 Toyota Fortuner 3.0D-4D

1 Answer

P2004 intake man.control bank 1 stuck open


The intake manifold runner control (IMRC) cables have plastic ends that like to break. Check your IMRC to see if the cable it attached. If the cable s attached, then the IMRC actuator is probably defective. (see diagram)

6_17_2012_2_48_42_pm.gif

Jun 17, 2012 | 2003 Ford Focus

1 Answer

When the engine is on , and the car stop, the engine has a many vibrations, and the ligth send p2008


Intake manifold Runner Sensor Bank 1 open- this sensor is located on the throttle body of the intake, make sure the wiring is not corroded or breaks in the wire connecting to it.If there is power present at it, replace the sensor.Please let me know if this helps

Jan 20, 2011 | 2004 Ford Focus

1 Answer

Ford Focus SE 2004 Check Engine light on due to: P2008-Intake Runner Control Circuit (IMRC) open B1 Is it an electric problem or mechanic?, and how to fix?,


Check the PCV hose from the manifold to pipe. It will get soft and collapse, leak. It will turn light on. Check while running.

Its possible that you need check this TSB.

Hope helps.

May 31, 2010 | 2004 Ford Focus

Not finding what you are looking for?
2003 Ford Focus Logo

Related Topics:

476 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...