Question about 2003 Oldsmobile Silhouette

1 Answer

WHERE IS THE CRANKSHAFT POSTION SENSOR

ITS A 2000 OLDMOBILE SILOHOUETTE VAN

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 396 Answers

Passenger Side. Take off the wheel, reach straight in on the firewall side of the engine, about 6-8 inches past the harmonic balancer. should feel the plug and the bolt holding it into the side of the block. TAKE YOUR TIME. sometimes they break apart while removing and then you really have fun getting the rest of it out.

Posted on Feb 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is located the crankshaft position sensor for 2005 dodge sprinter 2500


Is this a deisel motor? If so, it will not have a crankshaft sensor

Jul 19, 2015 | Dodge Cars & Trucks

1 Answer

Crankshaft postion sensor replacement 2010 jetta


located on the inner side,like bmw,on the flywheel support area,
just outside of the oil seal,

Apr 12, 2014 | 2010 Volkswagen Jetta 2.5

1 Answer

Our 2000 xterra stalled out while driving and wont stay started now. anyone know whats wrong?


either crankshaft postion sensor camshaft postion sensor sometimes tho cars just have a crank sensor and it does the cam sensor job to

Jan 14, 2013 | 2000 Nissan Xterra

1 Answer

How do you replace crankshaft sensors on a 2000 chevy venture


Why would you change a crank sensor

It failed a test?

How was it tested?

No parts get changed just for something to do

Dec 22, 2012 | 2000 Chevrolet Venture

2 Answers

How do check the CPS on a 2000 Ford Explorer?


you cannot check crankshaft postion sensor if your car has hard starts or does not start your crankshaft postion sensor is faulty it tells cars pc when to fire spark and to what cylinder to fire it to



if it helps please leave a 4 thumbs review if it helps

May 10, 2011 | 2000 Ford Explorer

2 Answers

I can't find the location of the crankshaft postion sensor in my 2000 Hyundai sonata


My online Sonata manual shows these possibilities, but does not identify which applies specifically to 2000 Sonata.
Also, when you talk to the dealership parts counter, you'll need to know whether your 2000 Sonata is (a) 4-cylinder 2.4L MFI DOHC engine, or (b) 6-cylinder 2.5L MFI DOHC engine.
Its easy to tell - just count your spark plug wires.

-- begine excerpt from 2000 Hyundai Sonata Repair guide --

The crankshaft position sensor is located next to the flywheel.
The crankshaft position sensor is located next to the flywheel/torque converter.
The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.
The crankshaft position sensor is located on the driver-s side of the vehicle, down by the lower radiator hose.
The crankshaft position sensor is located on the engine near the crankshaft pulley.
The crankshaft position sensor is located at the front of the engine near the timing belt.

--- end excerpt from 2000 Hyundai Sonata repai guide ---

Dec 29, 2010 | 2000 Hyundai Sonata

1 Answer

I needto know how to replace a Crankshaft postion sensor A circuit


      • The sensor is mounted in a fixed position in the engine block. The tip of the sensor protrudes into the crankcase at a distance of 0.05 plus or minus 0.02 inch from the crankshaft.
      • A crankshaft adjusting tool may be used to check these rings
      place the tool on the pulley extension surface and rotate the tool around the pulley.
    • If any blade touches the tool, replace the pulley.
  • Inspect the trigger wheel behind the crankshaft pulley and the sensor for damage.
  • If the engine misfires all the time or on acceleration only, test the following components:
    • Engine compression.
    • Spark plugs.
    • Spark plug wires.
    • Ignition coils test for firing voltage with a test spark plug.
    • Crankshaft sensor.
    • Fuel injectors on multiport and sequential fuel injection systems. To remove the crank sensor
  • Disconnect the wiring harness.
  • Unbolt the sensor mounting bolt.
If the crankshaft timing sensor or the camshaft reference sensor is removed, follow this procedure when the sensor is replaced:
  • Thoroughly clean the sensor tip and install a new spacer on the sensor tip. New sensors should be supplied with the spacer installed.
fr_24.15.gifSpacer on crankshaft timing sensor and camshaft position sensor.
  • Install the sensor until the spacer lightly touches the sensor ring, and tighten the sensor mounting bolt 105 in.lb.
hope this was what you needed.....

Jun 03, 2010 | 2000 Saturn Ls 4dr Sedan

1 Answer

Number one oxygen sensor on 2001 Oldmobile silhouette


Purchased an oxygen sensor socket from an auto parts store. Went from under the van up to the sensor and was able to take the sensor out and replaces using the socket. Wasn't hard at all took about 1/2 hour total.

Feb 08, 2009 | 1999 Oldsmobile Silhouette

Not finding what you are looking for?
2003 Oldsmobile Silhouette Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...