Question about 1990 Ford F150

2 Answers

I want to change my 4.9 6 cyl to a 302 v8 1990 150 ford

I want to change my 4.9 6 cyl to a 302 v8

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

A donor truck is a good idea, but the transmission, bell housing, cross members and transmission mounts will all be the same as long as you dont go from manual to auto or opposite. motor mounts will be different tho. i put a manual trans off of a 94 F-150 with a 300 6-cyl into my 91 bronco with a 351 V8 (5.8L) and used all the mounts and crossmembers off of the 94. only thing is the petal assm was different due to body changes. and the 5.8L also has a 11" clutch **** and the 5.0L and 4.9L both use a 10" disk. the bad thing is you will have a ton of stuff to change like the ECU, and engine harness and and other then the Ypipe and converters the exhaust will work. such a project is not for the faint of heart.

Posted on Feb 04, 2010

Testimonial: "Thanks For the Info I am going to do it "

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 279 Answers

Your best solution would be to purchase a donor truck with a 5.0 driveline.This will be a timely swap,you will have to change transmission,wiring harness,transmission crossmember,motor mounts,radiator,computer,exhaust system.If you have enough time and the other truck thens its possible to do this swap,we swapped a 1995 from a 5.0 to a 5.8 but in your case your engine is totally different.

Posted on Feb 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the firing order on a distributor cap


Hi Elikapeka . which engine is in your Thunderbird? Also Why do you want to know? is it not running?
the V6 3.8 litre firing order is:
V-6 Firing Order: 1-4-2-5-3-6
if you are having running problems and you have the big carburetor rather than injection. a good tuner guy is your expert and these guys do it by ear if they know what they are doing.

Apr 04, 2015 | 1990 Ford Thunderbird

1 Answer

What are theses codes for 99 Chevy Prizm 171,300,302,304?


171 Sys lean bank 1 possibly o2 sensor 300, cyl misfire detected random cyl. 302 misfire cyl # 2. 304 cyl misfire cyl #4 with all 3 of these codes it might be time for new spark plugs and wires

Sep 03, 2014 | Cars & Trucks

2 Answers

WHY IS MY 302 CID RUNNING, WHILE IT IS WIRED IN THE 351 FIRING ORDER?


Both engines are 8 cylinders! Could be the same firing order for both!

Jul 11, 2014 | Ford F-150 Cars & Trucks

1 Answer

1988 302 f-150 #5 cyl. not registering on compression test


Could be a broken rod that has left the piston up in the cylinder somewhere and not moving or there is a very large hole in it. With a spark plug out can you get a long screwdriver in there and push on it so see of the piston moves. Either way it sounds like a rebuild is in your near future.

Nov 05, 2012 | 1988 Ford F 150

2 Answers

Whats firing order for 1995 ford 302 engine what degrees is timing set at


1995 and later 302 firing order is 1-3-7-2-6-5-4-8

My 1991 302 likes to run at 12 degrees Before Top Dead Center.

Jun 03, 2010 | 1990 Ford F150

1 Answer

I have a 1990 Ford F150 4wheel drive pickup; and it is equiped with a straight 6 cyl. engine and an automatic transmission w/overdrive. What years of stock production transmissions will interchange with my...


What you have is an E4OD transmission and will work with all Ford small block engines (300, 302, 351) in F150,F250, F350 and full size Broncos from 1983-1993.

Dec 30, 2009 | 1990 Ford F150

2 Answers

Firing order for ford 302


the engive is a v so here is the engine numbering also can be found on the intake manifold embossed on the intake of each cylinder
1-5-4-2-6-3-7-8
4 8
3 7
2 6
1 5

Oct 17, 2009 | 2004 Ford F150

2 Answers

Firing order for 1989 full size ford bronco 302


13726548 #1 cyl is front pass side and count to back 1234 are on pass side.5678 are on driver side.# 5 being front

Apr 22, 2009 | 1989 Ford Bronco

1 Answer

Have a 1989 f 150 it had a 302 v8 in with a stick. motor and trans are gone can i put in a straight six and use existing wiring or will it be a pain i was even thinking of making it an automatic any info...


Ok. I went the other way .. I went straight 6 to V8 302.. rule 1: You cant use a fly wheel from an 8 to a 6 bc of the balance. if ya get an automatic 6 cyl combo,, youll need the 6 cyl chassis mounts bc the V8 is way to low.. and you'll have to rewire the dura spark to be a 6 cyl.. Its a pain.. But otherwise, No big deal

Mar 08, 2009 | 1989 Ford F 150

Not finding what you are looking for?
1990 Ford F150 Logo

Related Topics:

531 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...