Question about 2000 Toyota Tundra

1 Answer

In a Toyota Tundra v8 4.7l, after I change the Timing Belt, why does Check Engine comes on, and it shows Troubleshooting P0340.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 714 Answers

Symptoms Symptoms can include:

  • Hard starting or no start
  • Rough running / misfiring
  • Loss of engine power
Causes A code P0340 could mean one or more of the following has happened:
  • a wire or connector in the circuit could be grounded/shorted/broken
  • the camshaft position sensor may have failed
  • the PCM may have failed
  • there exists an open circuit
  • the crankshaft position sensor may have failed
Possible Solutions With a P0340 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
  • Visually inspect all the wiring and connectors in the circuit
  • Check for continuity in the circuit wiring
  • Check the operation (voltage) of the camshaft position sensor
  • Replace the camshaft position sensor as required
  • Check the crankshaft position circuit as well
  • Replace circuit wiring and/or connectors as required
  • Diagnose/replace the PCM as required

Posted on Feb 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Scanned my 2003 tundra 4.7L V8 it showed P0015 what seems to be the problem?


the dtc code is related to the camshaft timing. Has any work been done to the timing.e.g changing timing belt?
Re-check camshaft timing.

Nov 06, 2013 | 2003 Toyota Tundra

1 Answer

Stall Driving, Crank and no start codes p0127 p0335 p0340


it is in your firing distribution and or ignition coil pack on any engine when you get these codes ..if the vehicle is showing codes and it is still running say smooth ,,it will not be for long ,,those lights come on generally before these components go out

Oct 18, 2013 | 2004 Toyota Tundra

1 Answer

Hyundai Elantra 2001 timing belt


P0340-cam position sensor malfunction (change)
P0130- O2 sensor malfunction 1/1 (change)

May 01, 2013 | Cars & Trucks

1 Answer

Does the 2004 toyota tundra have timing belt or a timing chain


Both the V6 an V8 engines have a timing belt.
Most companies recommend replacement at 60,000 to 80,000 miles.

Aug 05, 2012 | 2004 Toyota Tundra

1 Answer

How many years or miles should a timing belt be changed on a 2000 V8 Tundra ?


Replace the timing belt at 90,000 miles or 10 years. Considering it is already 11 years old, replace it now. Warning: This is an interference engine. If the belt breaks you will have serious internal engine damage. The water pump is also driven by the cam belt so it is advisable to replace it at the same time you replace the cam belt in order to save labor cost later on when the pump fails. The pump will not last 180,000 miles so replace it now.

Feb 06, 2011 | 2000 Toyota Tundra

1 Answer

How do you change the timing belt on a 2004 toyota tundra pick-up


You will need the factory service manual. I was able to do it in about 4 hours, but it is quite involved as nearly everything on the front of the engine needs to be removed.

Jun 18, 2010 | 2004 Toyota Tundra

1 Answer

Changed timing belt and need to know how to set the timing


For your 2000 Toyota Tundra: I do not know if you have the 3.4L DOHC V6 or the 4.7L DOHC V8.

Click on the following free, direct Link. It has all the Timing Belt Diagrams you will need, complete with Instructional and Directional Diagrams to set your Timing.

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2000/make/toyota/model/tundra/2000_toyota_tundra_timing_belt_diagram_marks.htm

Apr 04, 2010 | 2000 Toyota Tundra

1 Answer

2004 toyota tundra when need to change timing built its allready 90,000 millage


It is due, think about it. Its 5 years old, and Toyota recommends 80,000 miles for Timing Belt replacement. And when you change that, do the water pump because its right there too!!!

Aug 04, 2009 | 2004 Toyota Tundra

1 Answer

2007 TOYOTA TUNDRA BELT TIMING


Here's something that might help you. Year older but should be same. Click on the link & scroll way down to 4.7 view, and click on picture to enlarge it.

( http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801988c8 )

Dec 21, 2008 | 2004 Toyota Tundra

Not finding what you are looking for?
2000 Toyota Tundra Logo

1,453 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...