Question about 2003 Chevrolet Silverado 1500

2 Answers

I cant find where my brake light fuses are for my 03 chevy silverado. the left brake light is out and the bulb is fine, but I dont know where the brake light fuse is.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 47 Answers

If your right side brake light is working then it won't be a brake fuse as all brake lights are on the same circuit. Check the wiring harness connection for the left side.

Posted on Feb 01, 2010

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 49 Answers

Fuses are under the hood on the driver's side, however if only 1 side is out it is probably the socket
terminals where the bulb sits, clean and tighten them and that should take care of the problem.

Posted on Feb 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Turn signal and brake light not working.


Change the bulb.The bulb has two lights.Running,and brake light turn signal.Its the bulb

Apr 14, 2013 | 2004 Chevrolet Silverado 1500

1 Answer

2003 Chevy Silverado When I apply the brakes the


I had an issue like this one on a 2007 Colorado. I assume you mean the turn signal indicator inside the truck lights up. It was a bad bulb. think it was the turn signal bulb on the side that is lighting up. As for the gear indication being dim there is more than one bulb that lights them up and one may have blown. I hope this helps.

Jul 15, 2011 | 2003 Chevrolet Silverado 1500

2 Answers

I have a 2006 Chevy Silverado 1500 4wd, and both of my brake lights stopped working, but the light above the bed of the truck still works. I have checked all the fuses, changed the bulbs, and checked the...


well it sounds like you have a short fro junction block to taillights , make your own wire from where you know you have power to brake lights . and that will tell you where to go.

Feb 13, 2011 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

Brakes Lights dont work on a 2006 Chevy Silverado


I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare

Jun 22, 2010 | 2003 Chevrolet Tahoe

1 Answer

Brake light dont work. 2006 chevy truck, 4.8L 2wd


Some of these had two fuses for brake lights. One for the top/center stop lamp and another for the rear left and right brake lights. Usually one said "stop" and the other said "brake" and one was in the underhood panel while the other was in the dash fuse panel. It's not uncommon to blow a brake light fuse [LR and RR] if you tow a trailer but some of these had seperate fuses for the trailer lights also. If you have a test light check both sides of the two fuses for power [ignition key on] while stepping on the brakes. It should at lest narrow your search a bit.

Jun 08, 2010 | 2006 Chevrolet Silverado 1500 2WD

2 Answers

Left brake light not working fuse bulb ok


check all your wiring from the light to the fuse panal. that should fix it

Apr 18, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Brake lights wont work! All others do!


I just had the same problem on my '04 Silverado. All it was was corrosion in the socket/bulb. Put some dialectic grease on both the bulbs and worked them in and out a couple of times and now they work fine. Was weird that they both went out suddenly and together but I guess they are made exactly the same.

Apr 05, 2009 | 2004 Chevrolet Silverado

2 Answers

2003 silverado 1500 v-6 brake lights dont work


ljones, Did you check the "VEH stop" fuse in the left side instrument panel fuse box. There are 3 stop light fuses, 1 for all the stop lights located in the under hood fuse box. 2 in the left side IP fuse box. 1 for the upper stop light and 1 for the lower stop lights. The fuse box in the IP is where the upper and lower stop lights split. Let me know.

Feb 26, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

2007 Chevy Silverado Center brake light works but back ones dont


There is a probable bad wiring connection in problem one and three.
#2 Possible water leak causing bulb break. Try wd40 in socket. you need a wiring diagam and cheap voltmeter if you want do it yourself.

Dec 24, 2008 | 2007 Chevrolet Silverado Classic SS New...

Not finding what you are looking for?
Cars & Trucks Logo

519 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...