Question about 1995 Jeep Cherokee

1 Answer

Powerwindows stop working did it once before came back not working now had the jeep 1 yr power lock work is it the switch?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

It could be the switch,but i would check the wiring harness between the door and body for any breaks in the wires first.since the doors always open and close,the wires which connects all of the door controls bend and sometimes even if 1 wire breaks it will cause all of the door controls to malfunction.just open the drivers door and look between the opening of the door.there usually is a wire loom covering the wires so you will have to try and get around it in order to see if the problem lies there.you might want to check all the door wires also.if there is a break,fix the wire then check all fuses/relays and everything should work like it should.hope this info helps you. take care and good luck, manny

Posted on Feb 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010toyotatundra powerlocks and powerwindowsdo not work


fuse blown.
check fuses.
some cars have circuit breakers on window motors.
if one motor shorts the breaker pops but then resets.
i use a voltmeter to find lost power feed.
its easy.
check voltage to motor, got 12v , when active (swith closed?)
no, then check at the switch, got 12v at switch input and output
with switch active,
yes, then wire is cut from switch to dead motor.
no, then wire is cut from input to switch and fuse.
like that. its not hard at all to use any voltmeter even a $10 meter at walfart.

Feb 27, 2014 | 2006 Toyota Tundra

1 Answer

1997 buick century. no powerwindows work replaced fuse still dont work also now blinker on left dont work


LOOK ON THE DRIVER SIDE AT POWER WINDOW MASTER SWITCH MAKE SURE LOCK OUT BUTTON NOT ON.THAT WILL PREVENT POWER WINDOWS FROM WORKING.CHECK BULBS IF OKAY BULB SOCKET CORRODED OR BROKE LOOSE WIRE AT SOCKET.ALSO TURN SIGNAL SWITCH COULD BE FAULTY.

Sep 19, 2010 | 1997 Buick Century

1 Answer

The back door locks and hatch lock will not work with the remote or with the switches on the front doors. have power on back locks when trying them. I check the back door lock and it gets power when useing...


I have a friend who had a Jeep with power lock issues.We ended up replacing all the power lock actuators,one at a time over a period of two years.Put one in, all is good, another one dies.make sure you have SWITCHING power and ground, not just power.If you do, plan on an actuator. The power locks usually made a squeal or chirping noise before they died...

Apr 09, 2010 | 2004 Jeep Grand Cherokee

3 Answers

All of a sudden i can not open any of my powerwindows they just stopped working


It sounds like a fuse blew. Check your manual for the fuse location and check there first.

i hope this solves it,
matthew

Oct 23, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Power windows stopped working, only front passenger window will work manually.


did you check the window lock out switch which locks all windows except drivers?

Jul 06, 2009 | 1998 Jeep Grand Cherokee

1 Answer

2000 taurus powerwindows not working


the problem was a faulty powermirror switch ,which had blown out a fuse under the dash.not under the hood. 2 fuse boxes ,huh??

Mar 18, 2009 | 2000 Ford Taurus

1 Answer

The driver's side powerwindow stopped working.


their is no fuse their is one relay that controls all the windows you prob have a bad motor or bad switch

Feb 22, 2009 | 2001 GMC Sonoma Extended Cab

1 Answer

Power locks broken


Check the wiring harness between the drivers door and "A" pillar.
You might have to peel the harness cover back and look to see if any wires are broken in there.

Feb 11, 2009 | 1996 Jeep Cherokee Country

Not finding what you are looking for?
1995 Jeep Cherokee Logo

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...