Question about 2002 Oldsmobile Intrigue

1 Answer

Where is the crank position sensor located on a2002 olds intrigue 3.5l

Posted by on

  • Regal Lace Jan 31, 2010

    thanks for your help really appreciate it



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,068 Answers

It is directly above the starter and behind the exhaust manifold. you will need to do this job from under neath the car and maybe easier to remove start if the sensors stuck in there with corrison.

good luck

Posted on Jan 31, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the Crank Shaft Position Sensor located on the Oldsmobile Intrigue 2000

The crankshaft position sensor is located just above the starter on the engine block.Hope this helps.Good luck.

Nov 06, 2010 | 2000 Oldsmobile Intrigue

1 Answer

Where is the Crank Shaft Position Sensor located?

The crank shaft position sensor is located just above the starter on the front of the engine block.If your not sure what you can do is purchase one and then look at the connector end to see if it looks the same.Hope this helps.Good luck.

Nov 06, 2010 | 2000 Oldsmobile Intrigue

1 Answer

Where can I find the crank position sensor on a 1999 Intrigue 3.5.engine H?

The crank sensor is located on the leftside of engine at the base of oil level indicator, heres a diagram to show you, the diagram show it with engine upside down,the sensor is near the bottom of the block right above the top of oil pan,remove a bolt and it slides out.a39ea9d.gif

Aug 24, 2010 | 1999 Oldsmobile Intrigue

1 Answer

Wer can i find the crank sensors on a 99 olds intrigue 3.5 engine

The crank sensor is located below the front exhaust manifold and above the starter. To access it, you must lift the front of the vehicle, and remove the starter. Once the starter is removed the sensor is visible. Because of the poor location and poor GM engineering these sensors fail. You have excessive heat from the exhaust and oil leaking from the valve covers that short them out. Also once the sensor is replaced, it must undergo a re-learn process. Unfortunately this process can only be performed by a GM dealer via their computer system.....if you need further assistance, feel free to post them on FYa...hopefully this helps!!

May 05, 2010 | 1999 Oldsmobile Intrigue

1 Answer

Crank position sensor

It is on the front of the motor under the manifold, you have to remove the starter first then it is right there on the block. make sure you diconect the battery befor removeing starter

Apr 13, 2010 | 2000 Oldsmobile Intrigue

1 Answer

Trying to replace the crankshaft position sensor on a 2001 olds intrigue and cannot locate it. Where is it?

Hello suewagner.
The crank sensor is mounted above the starter motor on the firewall side of the engine. The sensor picks up the signal direct off of the crankshaft through a machined hole in the engine block.
I have removed them without dropping the starter but learned that in most cases it is easier to drop the starter down to access it.
Here is a diagram for you.


There you are, hope this helps you.
Take care,

Apr 11, 2010 | 2001 Oldsmobile Intrigue

1 Answer

How do you fix the crank sensor on a 2002 olds intrigue

You cant fix it you have to replce it. They are usually located near the crankshaft pulley.(lowest pulley on the motor).

Mar 31, 2010 | 2002 Oldsmobile Intrigue

3 Answers

Is it a timing belt on olds intrigue 2000, 3,5L?

this engine uses a timing chain, chains require no replacement unless the engine is being repaired or the chain or spockets fail

Mar 26, 2010 | 2000 Oldsmobile Intrigue

2 Answers

Where is the crankshaft position sensor located on a 2000 intrigu

Should be located around 11:00 on front of engine at crank pully.

Oct 28, 2009 | 2000 Oldsmobile Intrigue

1 Answer

Crank position sensor location

you will need to remove the starter to gain acess to the ckp sensor. once you remove the starter look on the engine block and you will see the sensor. The only problem with doing this repair yourself is that you will not be able to preform the crankshaft position variation learn procedure with out a factory scan tool. The vehicle may crank an run, but the timing advance curves will be wrong so the vehicle will probably cut off every time you remove your foot from the gas pedal. Hope this info helps!

Aug 18, 2008 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
2002 Oldsmobile Intrigue Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides