Question about Hyundai Motor 2003 Elantra

Open Question

Cruise control not working on my 2003 hyundai elantra

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: cruise control stopped working in my 2004 Hyundai Sonata

I was having the same issue with my recently purchased 2004 Hyundai Santa Fe...Check your taillights/brake lights. Turns out, they are tied into the cruise control system and if one is out, the cruise control stops working. When I bought the vehicle, I knew the taillight was out, but did not know the cruise control was out. I still would not know they were tied together (and that I had unknowingly repaired the cruise control) if not for a post found here:

http://www.2carpros.com/forum/2004-hyundai-santa-fe-cruise-control-vt200265.html

hope this helps :) and happy motoring!!!

Posted on Nov 29, 2008

  • 1 Answer

SOURCE: cruise control stopped working in my 2004 Hyundai Sonata

This works...the cruise is directly tied to the brake lights...when I replaced the brake and side light bulbs on my 2004 Santa Fe,,,the cruise started working with no other adjustments. It must complete a circuit or something.

Posted on Jan 05, 2009

michigan man
  • 3533 Answers

SOURCE: oil change procedure on a 2005 Hyundai elantra

it is very easy to change the oil put the car on ramps secure the back end look for the drain plug underneath the engine make sure you have the right size wrench and when you remove the plug also check the gasket on the plug to make sure it is not cracked you will also need an oil filter wrench and my other suggestion to you is to go to autozone to see if they have a Haynes repair manual for your car and if they don't see if they can order you one in the mean time they can also print you off a diagram of how to change the oil in you car safely

Posted on Jan 20, 2009

  • 840 Answers

SOURCE: Adjusting the low beam headlight

its all the same the headlight is a complete unit you adjust both/ look for screws behind the headlight one each side one is for horizontal annd the other is for vertical Please rate my response thank you very much

Posted on Jan 31, 2009

  • 74 Answers

SOURCE: 2003 jeep grand cherokee cruise control not working.

it must be the part on the transmisiont that either went bad or the connections are bad

Posted on Jun 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix cruise control?


It seems this car has a problem with its cruise control if any of the brake lights are out or even if a bulb is flickering the cruise control will not engage. I would start my diagnosis there and also the cruise control fuse of course. hope this helps

Aug 04, 2014 | 2002 Hyundai Elantra GT

1 Answer

2002 Hyundai Elantra GLS: Cruise control stopped responding. Brake lights are working. What do I do to fix the problem?


It could be something a simple as the cruise control switch(s)... or it could be the Cruise Control Module located in the engine compartment. There's also a 'clock spring' in the circuit between the steering wheel & the cruise module. Note: there are two sets of contacts in the brake lamp switch, one set for the brake lights, the other for cruise control. Properly diagnose the 'CAUSE' of the problem. Otherwise you could end up buying parts you don't need. Proper diagnosis is a 'hands-on' activity, which is nearly impossible to achieve here under the FixYa website

ghost45_39.jpg
ghost45_40.jpg
ghost45_41.jpgghost45_42.jpg

Aug 31, 2011 | Hyundai Elantra Cars & Trucks

1 Answer

My 2007 hyundai elantra cruise control isn't working. you press the cruise button then the set and the light just flashes up then disapears and nothing happenes


I bought my 2007 Hyundai Elantral about 8 months ago and have loved it! But on my way to work this morning, mine did the same exact thing that you have described here. I assumed it was a fuse (in denial about the fact that it could be something much more serious). Have you found anymore out regarding this problem since you posted this?

Jun 05, 2011 | 2000 Hyundai Elantra

1 Answer

My cruise control doesnt work. could it b a fuse out?


CRUISE CONTROL PROBLEMS CAN BE CAUSED BY FUSE OR FAULTY BRAKE LIGHT SWITCH OR BLOWED FUSE TO BRAKE SWITCH.YOUR CRUISE CONTROL SWITCH COULD BE FAULTY.BEST TO TAKE CAR TO DEALERSHIP LET THEM HOOK CAR. TO DIAGNOSTIC EQUIPMENT.BECAUSE CRUISE CONTROL IS ELECTRONIC AND PCM CONTROL.THE CRUISE CONTROL SYSTEM USES INPUTS FROM VSS SENSOR .SO IT WOULD BE HARD TO FIX AT HOME YOU NEED EQUIPMENT TO FIX AND TROUBLE SHOOT.

Apr 20, 2011 | 2001 Hyundai Elantra

1 Answer

01 Hyundai Elantra - Cruise Control Doesn't Work w/ Headlights On


I had same problem (cruise control/dashboard lights) for the past month with my 2000 Elantra. Replace the tail lights bulbs - my problem was caused by a problem with the double filament within the bulb. Essententially, there was a short when I turned on the lights or hit the brakes.

I did this last night and everything is working properly now.

Sep 10, 2009 | 2001 Hyundai Elantra

2 Answers

2003 hyundai elantra gls abs/tcs light on


Two seperate problems. I would say you have a bad wheel sensor. A trip to a local big chain parts store will tell you. They will run a diagnostic and pull the code for free. Hope this helps...

Sep 07, 2009 | Hyundai Motor 2003 Elantra

1 Answer

2000 Hyundai Elantra--No Cruise Control, etc.


there are alot of harnesses to unplug.they missed a few by the sounds of it.
the cruise control is a cylinder that is vacuum operated and connected to the throttle cable.
check the vacuum lines and the wiring and make sure no wiring has been damaged installing the new engine.look for a plug that has clean looking pins,as the plug on an 8 year old car is clean on the inside.

Jun 13, 2009 | 2000 Hyundai Elantra

1 Answer

2004 Hyundai Elantra.......Cruise control will not engage


make sure the cruise control cable to the throttle isn't too loose, if it is ok, check your brake switch. if it is sending the signal the brake is on it will not allow cruise to work and will do same thing as described about the set light.

May 08, 2009 | 2004 Hyundai Elantra

3 Answers

"Cruise" on a 5-speed '00 Hyundai Elantra


I have this same car. The place you set speed control is on the windshield wiper switch on the right side of the steering column. The button with the indicator light has to be pushed in order to use the cruise control but just because the indicator light is on, it does not mean the cruise is on. Hope this helps a little. If you need more info and someone else doesn't answer more eloquently.. I'll check back and try to give you more info. :-)

Apr 09, 2009 | 2000 Hyundai Elantra

Not finding what you are looking for?
Hyundai Motor 2003 Elantra Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...