Question about 2005 Hyundai Tucson
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
yes , you need to remove the headlight cover from the back after u move the bulb conector then there is a holder for the bulb u need to push down then move.
i hope it help ,,,, thanx
Posted on Mar 16, 2009
Posted on Apr 23, 2009
You change it like you'd change any headlamp bulb. There is an access cap behind the headlamp assembly -- remove it, then remove the connector to the bulb, then remove the retaining clip/spring holding the bulb in place. Then install/insert the new bulb in the same 'ORIENTATION' as the old one. Reinstall in reverse order... ALAKAZAM!... .done!
Posted on Jun 25, 2009
SOURCE: headlight aiming
on each headlamp assembly, there will be either one or two plastic nuts that you can turn.
If you only have one nut on each, that will adjust the vertical aim of the headlights.
If you have two nuts on each, one will adjust the vertical and the other will adjust the horizontal.
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
Posted on Sep 14, 2009
Tips for a great answer:
May 20, 2017 | 2005 Hyundai Tucson
Jan 28, 2016 | Cars & Trucks
Feb 11, 2015 | 2005 Hyundai Tucson
May 20, 2011 | Hyundai Tucson Cars & Trucks
Disconnect the negative battery terminal.
Remove the head lamp mounting bolts, then disconnect the lamp connectors.
Replace the head lamp bulb(A), position bulb(B) and turn signal bulbs(C).
Head lamp bulb(A), position bulb(B) and turn signal bulbs(C)
To install, reverse removal procedure.
Dec 12, 2010 | 2005 Hyundai Tucson
May 20, 2010 | Cars & Trucks
Nov 28, 2009 | 2005 Hyundai Tucson
Dec 17, 2008 | 2006 Hyundai Tucson
1,073 people viewed this question
Usually answered in minutes!