Question about 2003 Chevrolet Suburban 1500

1 Answer

Left brake light not working. Checked bulbs &

Left brake light not working. Checked bulbs & fuses all good any suggestions?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 55 Answers

Clean socket then apply electric grease and bulb dont use that bulb i think its got a issue had same thing and that cured mine let me know

Posted on Jan 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1 brake light doesn't work... good bulb and fuse


Lights are usually on a dual circuit! Left and right have separate fuses, check all fuses or check the fuse diagram on fuse cover or manual to identify correct fuse!

Dec 28, 2014 | 2001 Dodge Intrepid

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Hello, I have a 97 eldorado with a tailight problem. My rear left doesn't get bright when i turn on my turn signal or hit the brake. My fron signal works fine, and the right light get brighter with the...


Now remove the bulb & put your volt meter to the
center socket contact & ground your blk lead.

See if you get 12.6 volt back to the socket
If not,then you have a voltage drop before the socket

I hate to suggest a wiring diagram, as your doing good
so far,BUT you may need one, after you get dirty under the
car some more following the wiring

Jul 02, 2011 | 1997 Cadillac Eldorado

1 Answer

Brake light out


You've got a broken or disconnected wire somewhere. Get a multimeter & check you have voltage on both sides of the fuse. If that's good you know you've got juice running out to the tail light. Remove the bulb & check for voltage in the socket. Chances are you have 20 years of corrosion behind the socket & it's dirty. Either way, you problem is a disconnected or corroded wire.

May 26, 2009 | 1989 Jaguar XJ6

1 Answer

Low Beam headlight and front parking lights do not work


see for the head lamp relay fuse a few manufacturer install a typical fuses for seprately for relay so see weather the fuse are ok or not then see for wiring as far you mention that the wiring of right side went streached to the lower ball joint there is a possibality that wire's can break internally & may get shot circuited due to cross circuit & may cause this sort's of problem & if possible show it to highly experience person techanican, mechanic or an authorised dealer or service centre who can sortout you car problem untill then see you soon my friend

May 08, 2009 | 1999 Lincoln Town Car

1 Answer

Left rear brake light stopped working but bulb and fuses are OK.


These are Dual Function Bulbs. They control the Parking Lights and the Brake Lights. This Bulb is Burnt out on the Brake Coil inside the Bulb. I have actually seen Bulbs that were Bad But you could not Tell by jast looking at them. It should be fine with a New Bulb. Please Rate My Response! Thanks!

Feb 05, 2009 | 1999 Ford Expedition

3 Answers

Left rear brake light stopped working but bulb and fuses are OK.


take the bulb back out have someone sit in car apply brake get your self a circuit tester and check to see if this circuit is carrying efficient 12 volt current! some times in cold weather these bulbs get hot with long period of breaking and when released condensate and rust begins and you get what you have perhaps bad socket! this would be a ideal location to begin and probably end,

Jan 03, 2009 | 1999 Audi A4

Not finding what you are looking for?
2003 Chevrolet Suburban 1500 Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...