Question about Chevrolet Silverado 1500

1 Answer

Hey i dont no if it changes anything but i am only havinf to remove the outer fender on my 06 silverado is this less complicated? i figure it would be since there is alot of stuff connected to the inner fender

Posted by on

  • willigan7 Jan 31, 2010

    im puuting on some prerunner style fiberglass fenders.

  • willigan7 Jan 31, 2010

    im putting on fiberglass fenders.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,926 Answers

Hi, what is the reason for the fender removal???

Posted on Jan 31, 2010

  • GetMeOttaHere Jan 31, 2010

    unfortunatly, There is no easy solution for your modification. i personnly have restored 3 vehicles myself, and the task your task is a rather large one and will require time and patience, not to say relocating conponents to be reattached.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Battery on 06 silverado runs dead over a few days of not being used.


More than likely a parasitic drain.
Many times in courtesy system--Check after dark for any system lights burning, especially lighted mirrors if present.
If not found, drain test required.

Jan 08, 2014 | Chevrolet Chevy Cars & Trucks

1 Answer

Harmonic balancer removal 2006 sonata


Do you have the harmonic balancer removal puller? It should come off with no problems after belt is removed.

Nov 17, 2011 | Cars & Trucks

1 Answer

03 silverado fender removal


Hey, to remove the fender on your 03 silverado, there will be a number of things you have to do. Can you tell me which side you are referring to (driver/passenger)? The bolts are the same, but the drivers side you need to remove the battery, the fuse box (clips) and the inner fender well (plastic) then there are bolts located at the hood hinge, two on the inner door, two behind the bumper, and it also requires the removal of you washer tank, and the small cross member attached to the fender and the firewall.....sounds like a lot, but I did mine in about 3 hours.......I can post a few pictures if you need them......please rate as well. Thanks.

Feb 02, 2011 | 2003 Chevrolet Silverado 1500

1 Answer

How do i change the head light bulbs on my 2007 silverado?


On 06 ,there are 2 rods that snap into the headlight mount Carefully unsnap(forward ) and wiggle and lift at the same time.Pins out , remove headlight assembly.

Apr 05, 2010 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

Need to replace 2003 silverado driver side front fender and just needing advise from someone that has done that. I can do it but what do I need to expect time wise and difficulty wise. Thanks


I need to do the same thing on my 2001 silverado. Did you get your changed? If so, How did it go? Im having trouble figuring out how the fuse panel should be disconnected.
Thanks,

Jan 19, 2010 | 2003 Chevrolet Silverado 1500

1 Answer

How do I replace the rh fender on 2000 chevy silverado 1500?


1.- remove the hhod and hood hinge
2.- loosen the wheel lug nuts , raise the vehicle and securely support on jackstands, apply parking brake .remove the fron wheel.
3.-Disconet the antenna( fender only)
4.- Remove fender mounting bolts at fron close to the turn signal.
5.-remove the top view bolts at the engine comparment.
6.-Detach the fender is a good idea to have an assistant to prevent damage to the parts of the body
7.- Installation is the reverse of removal.

Jun 20, 2009 | 2000 Chevrolet Silverado 1500

2 Answers

06 silverado timing chain


Does not require this service, as the motor has no timing belt, it is a maintenance free timing chain.

Mar 31, 2009 | 2006 Chevrolet Silverado 1500 2WD

2 Answers

Cannot get the 120amp Alt fuse out of the fuse block


You need to remove all of the bolts that holds the fuseboc onto the inner fender. The fusebox seperates into two pieces. The outer shell drops away from the center by depressing and releasing the lock tabs. After the outer shell is lowered, the bolts for the 120 amp fuse are visible.

Jan 12, 2009 | 2002 Toyota Highlander

1 Answer

1996 toyota corolla side marker light removal to install new one


Open the hood. Observe the "tab" on the driver side inner fender, above the corner of the headlamp, outer edge. Remove the screw. Pull the lamp assembly straight forward, towards you. If it has never been out, the lamp will be tight. There are 2 locking pins inside the fender that need to be defeated, you just have to grasp the back side of the lamp (closest to the driver door) and pull it straight towards the front of the car, NOT sideways.

Dec 23, 2008 | 1996 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...