Question about 1995 Chevrolet K1500

1 Answer

My 1995 suburban shifts but does not engage in 4wheel drive light does not come on it worked fine then just stopped no noises nothing all within one day

Posted by on

  • 1 more comment 
  • cacmcla7 Jan 31, 2010

    no it has a stick you shift into four wheel drive

  • DOUG BURSEY May 11, 2010

    does the stick feel the same as before, not tight or too loose. also automatic locking hubs? does it have vacuum lock in on the front axle?

  • DOUG BURSEY May 11, 2010

    does it have electronic 4wd?


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 95 tahoe with same problem. Fuse was blown. After changing fuse kept bowing. Took apart electric actuator motor and it was full of water and burned out. Installed new one. Still wont engage. What is next steP?

Posted on Feb 05, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 4wheel drive doesnt work? What can I do or look at to fix?

4 wheel drive does not work - CarGurus > Questions > Chevrolet > Suburban

CarGurusDec 17, 2009 - 4 wheel drive does not work - When I put the Sub in 4 wheel drive, low of high ... I want to "add" 4 wheel drive to my 95 1500 suburban w/ a 350.

My 4 wheel drive stopped working - CarGurus > Questions > GMC > Sierra 2500

CarGurusJul 15, 2014 - My 4 wheel drive stopped working - After struggling with the 4 wheel drive ... sometimes in low sometimes in high, now it doesn't engage at all.

4WD not engaging all the time. - CarGurus

Dec 05, 2015 | Cars & Trucks

1 Answer

96 explorer disengages 4wh low but does not engage 2wheel

Does it shift to 4wd high range ? If so then shift to 2wd . What is going on here is the transfer case motor is stopping due to the motor position sensor has gone bad which means that you replace the transfer case motor assembly. But if you wish to make it a 2wd for awhile then remove motor and manually turn shaft . This can be done by raising and supporting rear axle truck in park remove motor turn shaft slowly with pliers and rotating the play in drive shaft. There are stamped markings on back of case showing gear positions..

Mar 31, 2014 | 1996 Ford Explorer

1 Answer

Transmission when shifting from park to drive it engages fine but does not always go into over drive. is there shifting module or other device that could be causing the problem ?

My 2002 Chevy Silverado had the same problem and the overdrive part of the transmission was out so I had to get a new transmission.

Oct 03, 2013 | 1995 GMC Suburban

1 Answer

1995 k1500 suburban will shift into 4 wheel drive but then it jumps or bucks as you start to accelrate acts as if though it is not fully engaged. afraid it may damaged gears. any ideas?

My 95 did the same thing and it ended up being the Transfer case itself there was a missing tooth on a gear inside there.Jack the vehicle up and put it on stands remove the front drive line then spin each of the front tires if you don't hear any noise there then start working your way to the T-case,block the rear wheels very good and set the parking break put the vehicle in neutral and try to spin the output flange to the front axle listen for noises,if still nothing put the rear up on stands also and put it in 4wheel drive and trans in neutral spin rear drive line by hand and listen hopefully that helps to get you started in the right direction

Dec 26, 2009 | 1995 Chevrolet K1500

2 Answers

Brake lights not working on 1995 1500 4wheel drive suburban all three of them.

if you have checked fuse for them then its the brake switch. Look on the pedal arm under dash you'll see the switch.

Sep 07, 2009 | 1995 Chevrolet Suburban

1 Answer

No 4 wheel drive, no dash lights, no tail lights!

check your relays first (after the fuses) and the vacuum lines if you have those for the 4 wheel drive. Hope that helps

Mar 29, 2009 | 1995 Chevrolet S-10 CA Edition

1 Answer

2003 Lincoln Navigator will not shift from all 4wheel drive into 2wheel drive

this is common on these trucks just put your witch in 2 wheel and go ahead and drive it will let loos when it sees the correct secquence and drive a little and shift to netural.
just neve do it from high to low range

Sep 18, 2008 | 2003 Lincoln Navigator

Not finding what you are looking for?
1995 Chevrolet K1500 Logo

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides