Question about 2009 Ford Fusion

1 Answer

Ford fussion 2010 will start no problem but once transmission gear is selected the car appears to go into gear but will not move...forward or reverse...no dash sensor lights are on

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I do not know the solution. However, I experienced the same problem on a rental in Hawaii (4 cylinder 2010 Fusion) as I was attempting to pull out onto a busy highway. Also occurred several other times.
In my opinion, it is a transmission defect and a safety issue. The car had less than 8000 miles on the odometer. Return it to Ford.

Posted on Feb 04, 2010

  • sues Sep 05, 2013

    We have the same problem with my daughter's 2012 Ford Fusion. The Ford Dealer cannot find the problem.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ford Ranger won't move?


you might need a new whole transmission or new brakes or brake fluid.

May 03, 2016 | 2003 Ford Ranger Regular Cab

1 Answer

Why is gear stick moving up and down when accelerating in 5th gear


Degraded engine mounts makes the engine move backwards/forward when you accelerate, pulling the gear shift cable that is connected to the transmission. Have it checked and change all of them.

May 10, 2014 | 2010 Peugeot Partner HDi

1 Answer

1955 Ford Crwn Vic neutral switch will permit start in any gear not just neut or park. Is this a 2 or 3 speed auto transmission? will start in drive selection and only shift once witn no kickdown gear at...


A 1955 Ford would have a Ford-o-matic transmission which has three speeds forward. The transmission starts out in second gear unless you shift into low.
I am not aware of these transmissions having a neutral safety switch.
The 3 speed automatic transmissions that started in low and had a downshift to second under load were first used in the mid 1960s.

Apr 09, 2013 | 1991 Ford Ranger Supercab

1 Answer

2003 ford transit turbo manual gearbox, stuck in 2nd gear, cant start


does the clutch push normally or is the linkage broken not disengaging clutch, and then does shifter move around or locked and wont move, loose linkage in shifter or gears are jammed inside transmission and something went, if shifter wont move at all then trans is jammed inside and needs repair.

Jun 09, 2012 | Ford Transit Cars & Trucks

1 Answer

Car wont roll forward or back even in neutral


I assume it's a manual transmission.
If the car will not roll backward or forward in neutral (with or without the clutch engaged) the transmission is most likely locked in two gears at the same time.
This may happen if gear selectors are excessively worn. If you are able to examine the gear selection levers external to the gearbox, ensure they are in the 'neutral' (no gear selected) position when the gear lever is in Neutral. If not in correct position, you may be able to manually reset the levers to correct neutral position and thereby unlock the gearbox.
In any case, if it's happened once, it will happen again, so get the gearbox and gear selection mechanism checked for wear or breakage.


Jul 31, 2009 | 1997 Subaru Legacy

1 Answer

Transmission issue when starting from a stop


If it's not low on ATF, then the forward clutches and/or low one-way clutch are faulty.

Jul 08, 2009 | 1991 Lincoln Continental

1 Answer

94 tauras AT once warmed up trans will drop out gear at a stop


This is a common problem. You have a cracked forward clutch piston. Ford made this part out of aluminum. The replacements are steel. But you have to disassemble the transmission to install it. ( I know you said Rev too, In the AXODE trans, the forward clutch is on in 1st and reverse)

Apr 08, 2009 | 2000 Ford Taurus

Not finding what you are looking for?
2009 Ford Fusion Logo

369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...