Question about Ford E-250

1 Answer

04 Econoline e250\ broken side door lock

20004 Econoline e250 I have these new vans that I have been installing master lock locks on the doors so they can not be broken into easyly. On this one van I drilled threw the nylon pin in the door lock. Now the normal door lock dose not work. I wonder if anyone know what parts I would need to get to replace that so it works again? Also how much of a pain in the **** is it going to be to replace it?

Posted by on

  • bassetts Jan 31, 2010

    At this point I am not even sure what I am asking for. I also really dont want to replace the whole thing either. I would just like to get the nylon pin.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

The only place that is going to have a part is the dealer. They have schematics for every part of the vehicle. Your going to have to go there and get your answers. Getting the part is the first step

Posted on Jan 31, 2010

  • Susan Price Jan 31, 2010

    Only the dealer will have the correct part either way. Only other option is to micky mouse it or make the part yourself.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2005 Chevy extended cab 1500 and the controls on my driver side door aren't working. The door is saying it ajar when it's closed. I can't roll the windows up or down. Is it the master switch?

How to fix the Chev power window door lock switch - YouTube

? 5:04
Jul 13, 2013 - Uploaded by spelunkerd
How to fix the Chev power window door lock switch ..... Some time later my drivers side window stopped working in the down position. ... These intermittent electrical problems are frustrating,aren't they? .... How To Install Replace Door Locks Chevy GMC Truck Silverado Sierra Yukon Tahoe Suburban ...

Diagnose Power Door Locks Dont Work Properly - Auto ...
An inoperative power door lock can be caused by the switch, solenoid, wiring problem or ... Hi, I have a 2005 Nissan Sentra and the power locks aren't working. .... Hi, mypassenger door locks/unlocks both doors but my driver side door works independently and .... I have a 1986 Chevy Silverado K10 with auto door locks. • 2003 silverado no power in right door ...

Dec 26, 2015 | Cars & Trucks

1 Answer

On a 1998 Ford Econoline E-150, it has electric door locks. The side door and the back door lock does not work. Everything else in the van works. Where do I start looking besides fuse #4 and #5.

it could be the lock motor or it could be the wiring that came lose or wire damage ! need to now if it works from the doors that dont work or from the driver door it my be locked out at the diver door or it can be a wire lose or switch on driver door !

Apr 05, 2011 | 1998 Ford Econoline

1 Answer

On a 2003 Ford E250 Econoline van with electric door it possible to disconnect the rear and side cargo doors from being electrically controlled so that only a key can open them? How would I do...

Hi! Yes its possible if manual you want it to be. Try this, If the cargo doors have separate fuse from the fuse box then just remove the fuse and it would work manually. If you wont find the door fuse then you should work on the door manually. Open the cargo door trimming and you will find a motor inside the door. The motor has a connector that leads to the lock. Remove the connector to cut the power supply to the motor and you'll be on manual now. Hope this helps and have a good one!

Apr 27, 2010 | Ford E-250 Cars & Trucks

1 Answer

Do I need any special tools to remove and replace my worn lockset cylinder on my ford van? Is there an instructional video on line that anyone knows of?


I beleive you can do it, no need of special tools, a philips head screw dirver, needle nose pliers may be all you need.

raise the window all the way up
take the door panel and water shiel off
disconect the door latch to lock cilinder rod
use the needle nose pliers to remove retainer clip from door lock cilinder
remove door damaged lock cilinder by pushing it towards the outside.
instal the new lock cilinder making sure it is aligned an seated correctly.
push retainer clip into place.
Reconnect the lock cylinder rod to door latch.
check for proper oparation, if OK, instal watershield and door panel.

As you can see, it is a very simple task.

If helpful, click below. GOOD LUCK

Apr 08, 2010 | 1989 Ford Econoline

4 Answers

Problems with door locks and window

page 3-39 in owners manual. automatic door locks. do the steps and change too lock 2. this worked on my 2006 colorado crew cab. good luck

Apr 05, 2009 | 2005 Chevrolet Colorado

1 Answer

2001 Ford Econoline Locks doors on start up.

I do beleive you would need a ford New Gen or WDS tester to shut down that feature... it is on for safty reasons however and I would leave it that way. Hope that helps you .

Apr 02, 2009 | 2000 Ford Econoline

1 Answer

Power door locks working sometimes!

try replacing the master door lock switch in the drivers door this will take care of the problem

Mar 09, 2009 | 1999 Ford Econoline

1 Answer

Where is the fuel pump reset switch located on a 1995 ford e250 econoline van?

the switch is located under passenger side foot trim panel under glove box. open passenger side door and remove the plastic cover .

Jan 28, 2009 | 1995 Ford Econoline

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides