Question about 1995 Nissan Pathfinder

1 Answer

Finding where the remote box is located i have wire that should be for the remote start but can;t find where the box is

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Remote starter modules are typically tied up high under the driver side dash area. Look for a cluster of wires coming from ignition switch harness. Follow the wires that are tapped into this harness to find the module.

Posted on Jan 31, 2010

Testimonial: "thank you "

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote starter issue


the wire is crossed that activates the starting circuit. have a tech find the wire and swap them around remote start power wire should not be spliced into the other wiresd on the box at all so its a simple fix:)

Dec 05, 2015 | Saturn Cars & Trucks

2 Answers

1995 GMC Jimmy Keyless remote location


Make sure the place you are looking is under the steering wheel, not just the dash. The panel can be removed under the steering wheel and the connector can be shorted out. You should see a red connector or red wire. If rewiring was done, you might need to find a flashlight and follow every wire that is attached to any connector under the steering wheel. You should be able to pull the wires out enough to get a good look.

Good luck

Jun 21, 2008 | 1995 GMC Jimmy

1 Answer

2003 mercury sable wont start and theft light is on


With the theft light on it means the alarm or immobilizer is armed. you need to disarm it, try a spare remote, the one you have ma not be working..

if that fails contact your local dealer for the location of the immobilizer box, or if its custom installed contact the person who installed it..

usually you can find it under the dashboard.. Locate it and unplug the wires connecting to it.. you should be able to start now.

Dec 28, 2012 | Cars & Trucks

1 Answer

Keyless Entry and Remote


The alarm box might be disconnected. I would locate it and trace the wires. Start under the dash behind steering wheel. It usually a little black box

Dec 24, 2011 | 1996 Ford Explorer

1 Answer

I'm having a issue with our 1998 dodge ram 1500 4x4 V6, it started when I disconnected the battery to put it in a jeep, I reconnected the same battery back into the dodge to find the alarm lights flashing...


Reset switch locater on pos cable link in black box located on firewall drivers side. most people remove these sometimes. sometimes they can be located in fuse box. if you have alarm remote try reseting it by removeing batter in remote then reinstall or replace

Mar 22, 2011 | 1998 Dodge Ram 1500 4WD

1 Answer

Need to find wires for power lock &power unlock am installing a remote start these wires are for the power door locks on 2010 ridge line


If your 2010 Ridgeline is the same as the 2009, the wires colors and location are listed below;

Power Lock pink/black - MICU, green 30 pin plug, pin 25
The MICU (Multiplex Integrated Control Unit) is part of the dash fuse box, in the driver kick. It has 2 plugs on the left side edge of the fuse box. Meter this wire while pressing the passenger door lock switch.
Power Unlock pink/blue - MICU, green 30 pin plug, pin 9
The MICU (Multiplex Integrated Control Unit) is part of the dash fuse box, in the driver kick. It has 2 plugs on the left side edge of the fuse box. Meter this wire while pressing the passenger door lock switch.

Feb 08, 2011 | Honda Ridgeline Cars & Trucks

1 Answer

The engin will not turn over intermittently. I had the dealership check the batter, the starter and the alternator. All came out good. They could not get the car not to start so they could not fix it. ...


Try starting in Neutral instead of Park. If this works, the transmission range switch (sometimes called a neutral safety switch) is faulty in Park.

Next, you can try a remote start switch (available at auto parts stores) or a jumper wire to bypass the ignition switch. First make sure transmission is in park or neutral. You will be jumping from the battery positive terminal to the starter solenoid. The starter solenoid terminal has a black wire with a white stripe connected to it. (This terminal is visible just to the left of the automatic transmission dipstick tube.) Remove this wire and connect one end of the remote start switch wire (or jumper wire) to it. Connect the other end of the remote start switch wire to the battery positive terminal. Activate the remote start switch and see if the starter will crank. (If using a jumper wire, briefly touch the other end to the battery positive terminal and see if cranking will occur). If the starter works then you have a problem in the ignition switch, or starter cut-out relay.

The starter cut-out relay is located on the back of the driver's under dash fuse/relay box in the left wall kick panel. The ignition switch also has wire leads that plug into the back of this same fuse box. You can disconnect the wire leads and test the ignition switch with on ohm meter from this point.

Jan 23, 2011 | 2003 Honda Odyssey

3 Answers

How to program 2004 Hyundai Santa Fe Keyless Entry Remote


Synchronization
When
System malfunction. Remote control added or replaced.
How
Access alarm system control module located under driver's side lower fascia Fig. 2 . Set memory switch to SET position. Press remote control lock or unlock button. Set memory switch to OFF position. Confirm synchronization has been successful by locking and unlocking vehicle. Repeat procedure for second remote control. Synchronization can also be carried out using diagnostic equipment.
NOTE: A maximum of 2 remote controls can be programmed. NOTE: If remote control fails, system can be deactivated as detailed in the owner's handbook.

Mar 23, 2010 | 2004 Hyundai Santa Fe

1 Answer

Cant find the plugs for the wiring harness for the cd player


Radio wiring will start from the fuse box side to the back of the radio. Speaker wiring will be packed away with other related interior wiring

May 24, 2009 | 1992 Buick Regal

1 Answer

1995 GMC Serria K1500 W/AC heater blower motor resistor loaction


its under glove box on passenger side. inside the cab... look at the vent box near the firewall. it located on that box and part of it is in the vent. you'll see the wires going to it and its held on with 2 7/32 screws

Oct 25, 2008 | 1995 Chevrolet S-10 CA Edition

Not finding what you are looking for?
1995 Nissan Pathfinder Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...