Question about 1995 Ford F150 Styleside Regular Cab

1 Answer

Fuel tank remove and replacw

Fuel tank remove and replace

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 310 Answers

You need to jack up the truck block it then go to the tank and put the floor jack under the tank take the 2 bolts out of the sadle braekts then let down slowly till you can see the top of tank ten pull your feul lines lose and unplug the wires then the tank will come all the way out
then put it back in the same way you pulled it

Posted on Jan 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace fuel pump 95 taurus 3.0 6v ohc


You must remove the fuel tank to replace the fuel pump.
  1. Remove fuel tank.
  2. Remove any dirt that has accumulated around fuel pump module retaining flange.
  3. Turn fuel pump module locking retainer ring (#1)counterclockwise using Fuel Tank Sender Wrench 310-D006 and remove fuel pump module locking retainer ring.
  4. Pull fuel pump module sender plate up out of fuel tank until locking tabs(#3) for fuel pump module are accessible. Reach through fuel pump module opening, squeeze both locking tabs together and remove fuel pump module from fuel tank.

26441642-y320zuz4l2sbnhw34kuglarm-4-0.gif

Jan 10, 2017 | Cars & Trucks

2 Answers

2003 Ford focus fuel pump replace


Remove fuel tank, replace pump.

Mar 20, 2015 | Ford Cars & Trucks

2 Answers

How do I remove a fuel tank from a 2004 Buick Rendezvous


First of all, there is a recall for gas tank replacement for your vehicle. The dealer will replace it free. The link will get you to the document in PDF form
Redirect Notice
It looks like there is a bracket on one end of the tank hidden by a heat shield
0601244b03-002.jpg
FUEL SUPPLY SYSTEM Fits Buick Rendezvous

Feb 08, 2015 | 2004 Buick Rendezvous

1 Answer

How do I replace the oil pan on my 2003 Hyundai Accent GS? Please.


do not believe there is anything in the way as far as removing raise vehicle drain oil then unbolt the pan and remove replacw with new gasket in reverse refill the oil

Dec 11, 2012 | Cars & Trucks

1 Answer

How to replace fuel module regulator


to replace the fuel pump module.first you need to relieve the fuel system pressure.turn off radio first, then disconnect the negative battery cable.drain fuel from fuel tank.then then safely raise support car on jack stands. make sure sitting on solid level ground then remove the fuel charcoal canister hoses and vent line remove disconnect fuel pump. disconnect fuel pump electrical connector and remove fuel filler hose from fuel tank then remove the fuel tank from the vechicle.the heat shield and the rear exhaust system may have to be remove if you problem dropping the fuel tank.once fuel tank dropped you need snap ring pliers to remove the fuel pump module retaining ring.disconnect the fuel pump sending unit.disconnect the fuel pressure sensor and fuel pump module electrical connector .if you need help to replace the fuel level sending unit.you need a haynes repair manual.it has instruction how to remove and replace the fuel level sending unit.but most of the time the whole new fuel pump module come with new fuel level sending unit.if you are replacing fuel pump.when done put every thing back visa versa. be very careful working around gasoline and fuel tank.dont smoke.becareful dont make no sparks with wrenches when removing gas tank.wear safety glasses and have a helper at all times. dont work under vechicle by your self.

Apr 11, 2011 | 1999 Oldsmobile Alero

3 Answers

Do I have to drop the fuel tank to replace the fuel pump on a 94 Buick le saber


Yes ,,instructions are below, Use eye protection for this procedure
Remove or Disconnect:

  1. Relieve Fuel Pressure
  2. Disconnect negative battery cable
  3. Raise vehicle on hoist
  4. Remove Fuel Tank
  5. Remove Fuel Gage sending and pump assembly by turning cam lock ring counterclockwise. Lift assembly from fuel tank and remove fuel pump from fuel gage sender unit.
  6. Disconnect pump wires, hose clamps, and clamp around pump body
  7. Pull pump assembly out of rubber connectors
  8. Inspect fuel pump attaching hose for any signs of deterioration. Replace as necessary.
Install or Connect:

  1. Push fuel pump assembly into attaching hose
  2. Connect pump wires, hose clamps at attaching hose and around pump body
  3. Place Fuel tank sending unit and pump assembly into tank using new O-ring
  4. Place cam lock over assembly and lock by turning clockwise
  5. Install Fuel Tank
  6. Start engine and check fuel pipe connector for visual leaks

Oct 20, 2010 | 1994 Buick LeSabre

1 Answer

How to replace fuel pump


Empty fuel tank, support fuel tank, remove straps from tank (you'll probably have to replace those). Remove fuel filler neck from inside fuel door or at tank, drop tank, remove wire clips and fuel lines as necessary, remove fuel pump, put new pump in. Installation is reverse.

Jun 27, 2010 | 1997 Plymouth Breeze

1 Answer

How do I replace a fuel pump on a 1995 ford aerostar


drain all the fuel you can from the tank, SAFELY using proper saftey equipment, place the vehicle on jack stands, disconnect the battery, place a jack under the tank, remove fuel cap, remove 3 screws holding filler neck to the inside of fuel filler door compartment, remove tank straps, remove driveshaft, lower tank slightly & remove fuel neck, wires, fuel couplings, lower tank & remove from vehicle. Carefully remove locking ring from the tank where it holds down the fuel pump asy, remove pump asy & replace components as needed, reassemble, check for leaks, road test vehcile

Nov 02, 2009 | 1995 Ford Aerostar

1 Answer

Where is the fuel pump located and what does it look like (Mazda 94 Proceed)


I believe this is same truck as Ranger

Pump is in tank

Removal
NOTE: On some vehicles, fuel gauge sending unit is not available separately. On those vehicles, to replace sending unit, replace entire fuel pump .
  1. Remove fuel tank as described in this section.
Removal and Installation
NOTE: Make sure fuel tank is properly supported during removal and installation procedures.
  1. Drain fuel from fuel tank .
  1. Loosen fill pipe clamp.
  1. Remove bolts securing shield and bracket assembly to frame (5005) and remove assembly from vehicle.
  1. Remove fuel tank filler pipe from vehicle.
  1. Support fuel tank .
  1. Remove bolts and nuts from rear fuel tank support strap and remove rear fuel tank support strap .
  1. Remove bolt and nut from front fuel tank support strap and remove front fuel tank support strap .
  1. Lower fuel tank .
  1. Remove fuel feed hose at sender push connector.
  1. Remove fuel return hose at sender unit push connector.
  1. Disconnect sender and fuel pump electrical connector.
  1. Remove fuel vapor hose from fuel vapor valve .
  1. Lower fuel tank from vehicle
  1. Remove fuel tank to bench. Remove any dirt that has accumulated around the fuel pump attaching flange so that it will not enter the fuel tank during fuel pump removal.
  1. Turn the fuel tank sending unit locking retainer ring (9A307) counterclockwise with the Fuel Tank Lock Ring Wrench Tool T90T-9275-A or T86T-9275-A and remove fuel tank sending unit locking retainer ring .
  1. Remove the fuel pump and sender assembly.
  1. Remove fuel pump mounting gasket (9417) and discard.
  1. If necessary, disconnect spade connector and remove two screws and fuel gauge sending unit.

Jun 25, 2009 | 1994 Mazda 2WD B Series Pickup

Not finding what you are looking for?
1995 Ford F150 Styleside Regular Cab Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...