Question about 1997 Volkswagen Jetta

1 Answer

Hand brake not working ( only 6%)after pad and disc change . hand brake coming up a long way

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 474 Answers

Check your connections to the caliper and make sure the cable end is held down to the car securly.If that is ok try adjusting cables or check for broken cables.

Posted on Jan 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you adjust emergency brake


read the workshop manual as you have not determined the make and model of the vehicle
most rear disc brakes have a screw adjustment that you have to move to get the hand brake to come into contact with the piston to get the hand brake to activate the pads

Feb 07, 2016 | Cars & Trucks

1 Answer

Why are the Rotors getting so hot on the front and rear so hot I can not touch them.


The rotors are doing their job by getting hot
the purpose of the brakes is to change the kinetic energy of the spinning wheels to heat energy by the friction between the pads and the rotors (discs) This conversion of energy from kinetic to heat is what slows down the vehicle and stops it . The pads have no way of staying off the discs except by the air flow that is dragged under the pad by the friction with the disc So to sum up discs get hot by converting energy and the more energy you have the hotter they get
(watch high speed race cars at night and you will see the discs are white hot or bright red )
Back discs are slightly different as they don't come on as hard as the front discs and they also are affected by hand brakes out of adjustment
IF you feel that the discs are getting too hot for the distance covered there may be a problem in that the callipers are binding on the mounting bolts (pins) and are not centralizing and hence one pad will be in contact all the time This pad will show more wear then the other pad on the same disc.

Feb 15, 2015 | Cars & Trucks

1 Answer

How can i change the brake pads on the rear tires??


Hi. Please see procedure below:

Remove the old Brake Pads

1 Park your car on a level surface. If you have a stick shift car make sure the car is in gear. Place blocks in front of the front tires so the car does not move while you are working on it.

2 Open the hood of your car and locate the master cylinder. If necessary, remove brake fluid until the level in the container is less than half full. A turkey baster is a good tool for this. Put the brake fluid in the plastic container and dispose of it the way you dispose of motor oil.

3 Raise the rear end of your car with your car jack. Remove the rear tire or wheel assembly.

4 Remove the parking brake cable from the back of the caliper. Use the pliers to remove the cable clip (restraining clip). This step is done only for Grand Prix RPO Z7Us.

5 Hand-tighten two lug nuts to the studs to hold the disc rotor in place while you work on the caliper. Remove the bolt and washer holding the cable support bracket to the caliper. The cable support has the parking brake cable and brake hose attached to it. This step is not done for Grand Prix RPO Z7Us.

6 Use the socket wrench to remove the caliper guide pin bolts. Slide the caliper off of the disc rotor and hang it in the wheel well with a small bungee cord or wire hanger; Don't let the caliper hang from the brake hose.

7 Remove the brake pads and shims from the caliper. Throw away the shims.

Install the new Brake Pads

1 Use the spanner tool to rotate the piston clockwise all the way into the caliper. Make sure the notches on the piston are at the 6 and 12 o'clock positions. There is a boot (rubber seal) around the piston bore. Lift the seal's inner edge and press out any trapped air. Insert the brake pad clips into the caliper support.

2 Apply a thin coat of lubricant to the parts of the inner pad that come in contact with the caliper piston and mounting areas. As you install the brake pads in the caliper support, make sure the wear sensors are downward and at the leading edge of the rotor when the tire rotates. Push the brake pads into the support, holding the metal shoe edge against the spring end of the pad clips. This slightly bends the spring ends and lets the notches engage with the support. This step does not apply for the Grand Prix RPO Z7U.

3 Swing the caliper back into place over the brake pads and replace the mounting bolt. Reconnect the cable support bracket and tighten the bolt to 32-ft.lb. (43 Nm). Remove the lug nuts holding the rotor in place. For the Grand Prix RPO Z7U, Slide the caliper back into place on the disc rotor. Reconnect the parking brake cable. Insert and tighten the caliper mounting bolts to 44 foot lb. (60 Nm).

4 Replace the tire wheel assembly. Lower the car to the ground.

5 Pump the brake pedal a few times to seat the brake pads. Do this before trying to move your car.

6 Add fluid to the master cylinder container to replace any you removed before you removed the old brake pads.

7 Season the brake pads by making only gentle stops when you are driving for the first week

Thanks!

Apr 29, 2011 | 2006 Pontiac Grand Prix

1 Answer

How do you change front brake pads on an Audi A6 2006


How to change front brake pads & rotors (brake disc) on 2006 Audi A6:

Atention!!!
Don't disconnect any brake line from caliper!
Don't disconnect any ABS sensor!
For change front brake pads you must raise vehicle, remove wheels, extract the retaining spring of the caliper, and remove the caliper as follow:

1. Do not disconnect the brake hose from the caliper, and do not allow the caliper to hang by the brake hose!
2. Remove top and bottom caps (on back side of the caliper) for access to guide pins, then unbolt and remove them from the brake carrier. Remove the caliper.
3. Now you must thoroughly clean the brake calipers (free of grease).
4. Remove outer brake pad from brake carrier.
5. Pull inner brake pad out of brake caliper piston.
6. Remove brake carrier from wheel bearing housing (two ribbed bolts). 125 Nm
7. Remove brake disc from wheel hub.
8. Install brake carrier on wheel bearing housing. Tightening torque for two ribbed bolts = 125 Nm.
9. Check up the brake fluid level on the reservor, and emptying if neccessary!
10. Push piston back into brake caliper housing.
11. Install inner brake pad (with expanding spring) in brake caliper piston. (Arrow marked on pad - if exist, must point in direction of brake disc rotation when vehicle is moving forward).
12. Install outer brake pad into brake carrier.
13. Bolt brake caliper housing to brake carrier using two guide pins. Tightening torque is 25 Nm.
14. Install both caps.
15. Insert retaining spring into brake caliper housing. Important: Depress the brake pedal firmly several times while the car is stationary so that the brake pads adjust to their normal operating positions!!! Check brake fluid level and top up if neccessary!!!

Nov 26, 2010 | 2006 Audi A6

1 Answer

Replace rear brake pads


Rear disc brake pads offer better performance and are not as affected by moisture like conventional brake shoe style brakes are. Rear disc brakes are similar to front disc brakes. The main difference is that rear disc brake systems must incorporate the emergency brake system. There are two methods widely used for the emergency brake with rear disc systems. The first system is a brake shoe inside the brake disc that is actuated by the emergency brake lever. The second is a screw style actuator inside the brake caliper. When activated the brake pads are forced into the brake disc and held tightly by the emergency brake lever.
READ COMPLETELY BEFORE STARTING
Step 1 - Identify Rear Disc Brake Components
rear_brake_pads.jpg Rear disc brake assembly includes; rear brake disc, rear brake pads, brake caliper mount and a caliper mounting screw. (Note: Some vehicles do not have the rotor mounting screw.)
Step 2 - Removing the Rear Brake Caliper Mount Bolts
rear_brake_pads_2.jpg To replace rear brake pads and rotors the rear brake caliper needs to be removed. First loosen the rear brake caliper mount bolts and remove them. Turn counter clockwise.
Step 3 - Lift Rear Brake Caliper from The Caliper Mount
rear_brake_pads_3.jpg After the caliper mount bolts have been removed, gently lift the brake caliper from the caliper mount. Inspect the caliper slides; they should move freely in the caliper mount. Remove rear brake pads and hardware.

Step 4 - Removing Caliper Mount Bolts
rear_brake_pads_4.jpg With a socket wrench or other appropriate removal tool, loosen the rear brake caliper mounting bolts. Remove bolts and lift the caliper mount and remove it from the vehicle. Remove the retaining screw from the disc mounting hole. Tap the rotor gently to release any rust that has accumulated between the rotor and bearing hub. Lift brake rotor from wheel hub holding on tightly, using both hands. You do not want to drop the rotor.

Step 5 - Removing Rear Brake Rotor
rear_brake_rotor.jpg Remove the retaining screw from the disc mounting hole, tap the rotor gently to release any rust that has accumulated between the rotor and bearing hub. Lift brake rotor from wheel hub, hold on using both hands and do not drop.

Step 6 - Install New Brake Rotor
rear_brake_rotor_2.jpg Check the new rotor against the old brake rotor to make sure they are the same size. Clean the mating surface on the wheel hub before the new brake rotor is installed. Reinstall rotor retainer screw.
Step 7 - Reset Rear Brake Caliper
rear_brakes_7.jpg Before new brake pads can be installed, the rear brake caliper must be reset. The reset tool winds the piston back into position so the new brake pads will fit. This style of brake caliper will not compress with a clamp tool; it can only be reset with the proper reset tool.
Step 8 - Reinstall Rear Caliper Mount and Install New Rear Brake Pads
rear_brake_rotor_3.jpg After the caliper has been reset, reinstall caliper mounting bolts and make sure the bolts are tight. Then match up the old brake pads to the new brake pads. They should be exactly the same except, of course; the old ones will be worn out. Check the new brake pads for proper fit and install any brake hardware that is required.
Step 9 - Remount Rear Brake Caliper
rear_brake_rotor_4.jpg Reinstall the brake caliper, align brake pad hardware and reinstall caliper mounting bolts. (Note: align the rear peg of the brake pad to the groove in the caliper piston.) Recheck and retighten all caliper and caliper mount bolts. Bleed brake system to relieve any air in the system. Before driving the vehicle, push the brake pedal down and let it up slowly. This operation forces the brake pads to travel to the brake rotors. DO NOT DRIVE VEHICLE until proper brake pedal operation resumes. When test driving vehicle listen for any unusual noises during the operation of the brakes.
WARNING! Always have the vehicle under inspection on level ground, in park with the emergency brake on. Always wear protective eyewear, gloves and necessary clothing before inspection or work begins. Never crank an engine over when anyone is near the battery or engine. Always have an operational fire extinguisher close by, obey all first aid instructions in the event of an injury. Never stand in front or behind a vehicle when cranked over or running. When engine is cranked over keep hands and clothing away from rotating components. Never move a car without proper brake pedal operation.

Jun 01, 2010 | 1995 Saab 900

1 Answer

How to change the brakes on a 1998 ford windstar?


Very easy! I owned several different year Windstars....very good van...

Changing the pads are very easy. Here is the instructions:

Removal & Installation
  1. Remove the brake master cylinder reservoir cap. Siphon and recycle approximately half the fluid from the reservoir.
  2. Raise and support the vehicle safely.
  3. Remove the wheels.
  4. Remove the disc brake caliper guide pins.
It is not necessary to disconnect the hydraulic lines.
  1. Lift the disc brake caliper from the anchor plate.
  2. Position the disc brake caliper out of the way by suspending with a wire.
  3. Remove the brake pads from the anchor plate.
To install:
  1. Inspect the rotor surfaces for scoring or buildup of lining material. Minor imperfections do not require machining. Hand sand the glaze from the rotor using 150 grit aluminum oxide sand paper.
  2. Use a C-clamp and wooden block to seat the disc brake caliper hydraulic piston in its bore, as illustrated. This must be done to provide clearance for the disc brake caliper to fit over the front rotor during installation.
  3. Remove all built-up rust from the inside of the brake caliper pad contact area.
  4. Install the brake pads, with the clip on insulators, into the front brake caliper anchor plate.
  5. Install the disc brake caliper onto the anchor plate.
  6. Install the disc brake caliper guide pins and tighten to 23-38 ft. lbs. (31-38 Nm).
Failure to tighten the lug nuts to the proper torque in a star pattern may result in damage to the brake rotor.
  1. Install the wheel and tighten lug nuts to 83-112 ft. lbs. (113-153 Nm).
  2. Lower the vehicle.
  3. Pump the brake pedal to seat the brake pads.

May 28, 2010 | 1998 Ford Windstar

1 Answer

Rear brake disc needs replacing


with car on stands use punch to remove pad retaining pins pull out pads can be tight remove 2 calliper retaining bolts move calliper away from disc remove disc retaining bolts remove disc check hand brake shoes and clean look for adjuster between shoes if it has one back it of some models just have hand brake cabel adjustment clean and fit new disc secure adjust hand brake shoes using screw driver through wheel bolt hole clean refit calliper slowley push back calliper pistons fit new pads refit retaining pins do other side pump up brake pedal check and adjust handbrake if neededcheck brake fluid level

Oct 20, 2009 | 2001 Volvo S80

2 Answers

Change back Brake pads on renualt megane 2


1. Hand Brake ON , loosen wheel bolts to hand tight, jack up front wheel , chock back wheels , put axle stands/blocks in place (just in case) .

2. Remove wheel. Disconnect pad wear wire , it pulls out of the connector.

3. Remove lower caliper bolt (at the back of caliper at the bottom) , need a 13mm ring spanner for head of bolt and 17mm to stop it spinning

4. Use a screw driver between the back of the outer pad and the caliper to prise the caliper back away from the back of outer pad. Pivot caliper upwards to rest on top of wheel disc (good idea to tie it up with some wire) .

5. Remove and discard old pads , clean out with wire brush and soft brush , don't breath in to much of the dust its nasty.

6. Fit new pads (remember pad wear sensor on inside pad), make sure that the pads are in contact with the disc , and the top of them sitting flush with the rim of the disc, don't force them into this position they should naturally sit there.

7. Lower caliper down into position, you may need to push back the piston further in order to make room for the new pads , do this with you hands or a small piece of timber. Keep an eye on the brake fluid resivoir , your pushing fluid back in so if its over full it may spill over. Refit lower caliper bolt (Renault say to replace this each time), and tigthen. Reconect pad wear sensor.

8. Pump brake pedal until normal brake pressure returns.

9. Remove axle stand/blocks , refit wheel and bolts , lower jack and tighten up wheel bolts.

Sep 18, 2009 | 2006 Renault Le Car

2 Answers

2001 brake pad replacement 2001 nissan quest


The hard part is pressing the caliper piston abck into the caliper so you can get the new, thicker pads over the rotor. A large C Clamp works best.

SECTION 206-03: Front Disc Brake 2001 Villager Workshop Manual
REMOVAL AND INSTALLATION Pads —Front Disc Brake Removal
  1. Remove the wheel and tire assembly. For additional information, refer to Section 204-04 .
  1. Remove the front disc brake caliper bolts. torx bit. T20?
  1. Support the front disc brake caliper from the front strut and spring assembly using mechanics wire.
  1. Remove the front disc brake pads.
    1. Remove the outboard front disc brake pad.
    1. Remove the inboard front disc brake pad.
Installation
  1. s1v~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Make sure the master cylinder reservoir does not overfill and spill brake fluid while retracting the front disc brake caliper piston.
    NOTE: It is necessary to fully retract the front disc brake caliper piston in the bore before installing the front disc brake pads.
    Install the front disc brake pads.
    1. Install the inboard front disc brake pad.
    1. Install the outboard front disc brake pad.
Caution. The outer pads are left and right. put left on driver side.
  1. Position the front disc brake caliper on the front-wheel knuckle and install the brake caliper pin bolts.
  1. s1v~us~en~file=ani_caut.gif~gen~ref.gif WARNING: It is necessary to depress the brake pedal several times to position the front disc brake caliper piston before driving the vehicle.

Apr 23, 2009 | 2001 Nissan Quest

2 Answers

Breaks


under 200.00

Dec 28, 2008 | 2003 Mazda Mazda6

Not finding what you are looking for?
1997 Volkswagen Jetta Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...