Question about 1987 Isuzu Pickup

1 Answer

Where is the coolant temp sensor on a 93 isuzu pickup? I can't seem to find it. Thanks

Posted by on

  • rick29 Feb 01, 2010

    I've got the sensor and I have replaced them on other cars, but I can't locate this one. I've looked around the thermostat housing on the intake, under the intake. I was hoping maybe someone had replaced one on this model before

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 474 Answers

I would try looking around the thermostat or on the side of the cylinder head.If you look at the new sensor you will have a better idea what you are looking for.

Posted on Jan 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is coolant temp sensor on1989 isuzu 2.6 efi engine


engine coolant
guage sensor
a/C CUT OUT OVERHEAT SENSOR.
There can be 3 sensor.
not posting what doent work makes this impossible.
engine ECT reads wrong
gauge only reads wrong
or A/C cuts out when engine overheats (normal for overheat)

Mar 14, 2015 | Isuzu Cars & Trucks

1 Answer

Coolant temp sensor location on 1998 Isuzu Amigo 2.2L 4X4.


Go in on utube and ask the question Where is the 1998 Isuzu amigo coolant temp sensor located good luck

Oct 22, 2014 | 1998 Isuzu Amigo

1 Answer

Coolant temp sensor


the coolant sensor in GM have the same color code for wire Black and yellow.Now coolant sensor is located on engine block or near thermostat.

Sep 16, 2013 | 1993 Oldsmobile Cutlass Ciera

1 Answer

93 isuzu pickup pulsing idle.


if u undo 2 bolts that hold ur distributor on alittle then ur can turn dizzy clock wise or anti clock wise to get it ideling higher or lower
6_5_2013_2_02_36_am.jpg

May 18, 2013 | Cars & Trucks

1 Answer

Saber que es codigo 15 codigo 20 y codigo 25 isuzu trooper mod 1988 gasolina 2.600 cc. inyectado


Revise estos codigos correspondientes al sistema OBD I...

13 Open Oxygen Sensor Circuit
14 Coolant Temperature Sensor (High Temp Indicated)
15 Coolant Temperature Sensor (Low Temp Indicated)
21 Throttle Position Sensor (Signal Voltage High)
22 Throttle Position Sensor (Signal Voltage Low)
23 Manifold Air Temperature (MAT) Low Temp Indicated
24 Vehicle Speed Sensor (VSS) Circuit
25 Manifold Air Temperature (MAT) High Temp Indicated
32 EGR system fault
33 MAP sensor circuit (signal voltage high, low vacuum)
34 MAP sensor circuit (signal voltage low, high vacuum)
44 Oxygen Sensor Circuit (Lean Exhaust Indicated)
45 Oxygen Sensor Circuit (Rich Exhaust Indicated)
51 PROM error (faulty or incorrect MEM-CAL).


Suerte.

Apr 18, 2011 | 1987 Isuzu Trooper

1 Answer

I have a 1995 isuzu pickup it giving me error codes 15 and 34 and I've already been to 3 repair shops and can't get it fixed can you give me some help


I have the manual for my 93 rodeo and code 15 says ENGINE COOLANT TEMPERATURE SENSOR-SENSOR SIGNAL SHORTED, GROUNDED OR OUT OF RANGE. Check your coolant sensor by the water neck-it sends a signal to your dash gauge (coolant temp)
Code 34 my book has 2 symptoms- if its a 3.1 liter engine it says MAP SENSOR-SIGNAL VOLTAGE LOW-CHECK INCORRECT IDLE SPEED, VACUUM LEAKS, LOOSE AIR DUCT, MAP SENSOR CIRCUIT
If its NOT a 3.1 liter engine, then code 34 is EGR TEMPERATURE SENSOR CIRCUIT-SHORTED

Hope this helps.

Mar 19, 2010 | 1995 Isuzu Pickup

1 Answer

Eagle vision 93 lot of fuel


CHECK FUEL PRESSURE AND THEN CHECK YOUR COOLANT TEMP READING.iF IT IS SHOWING 144 CHECK THE WIRE AND IF GOOD REPLACE SENSOR

Feb 26, 2010 | 1995 Dodge Intrepid

1 Answer

Have 93 Amigo replaced O2 sensor but still will


check for a blocked catalytic convertor, disconect the exhaust from the manifold or the conection to the convertor and start run the vhicle and see if it makes a difference if so replace unit, if not, then check the IAC sensor and mass air sensor

Oct 28, 2009 | 1993 Isuzu Amigo

1 Answer

Lurching start 2004 Audi A6


try the coolant temp sensor...if its getting the wrong readings then it will fuel accordingly....

Apr 13, 2009 | 2004 Audi A6

1 Answer

1993 TOYOTA PICKUP (V6) TEMPERATURE PROBLEM


the trans will not allow overdrive until coolant reaches roughly 180 degrees, if the guage shows cool and the trans is not upshifting, or downshifts to third while driving. the problem is either a sticking (or missing) thermostat. follow the lower radiator hose to the engine and find the three 12mm nuts, remove these to get to it. a new toyota t-stat will have a little bleed valve on its face. position it upwards when installing. hope this is helpful.
P.S. Happy New Year





Jan 01, 2009 | 1993 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...