Question about 1995 Mercury Sable

1 Answer

I replaced the side mirror on my car (95 Mercury Sable), but it is tilted out now because the metal plate underneath got warped when the original mirror broke. How do I replace the metal plate without replacing the entire trim piece that it is connected to? If that is not possible, then what's the best way to replace the metal plate?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 396 Answers

The metal plate is part of the door. Take the mirror back out, and adjust the plate with a block of wood and hammer or dadblow mallet.

Posted on Jan 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where are transmission mount on 95 mercury sable 3.8 automatic


It should be at the rear extension housing of the tranny underneath but on top of a cross member. There may be 2 at angle on either side but the location will be the same.

Dec 07, 2013 | Cars & Trucks

1 Answer

How do I remove the headlight housing assembly for a 95 mercury sable wagon?


Then have clips on the back side that you have to spread apart and hold and then lift the side clip up and out of the adjusting screw.

Nov 06, 2013 | 1995 Mercury Sable

1 Answer

Replace 1995 Mercury Sable side mirror


take off your door pannel and bezzel remove three 10mm nuts from back of mirrior unplug electical connector and reverse to install

Sep 05, 2009 | 1995 Mercury Sable

1 Answer

How do i replace the driver side mirror on 1999 mercury sable?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jul 04, 2009 | 1997 Mercury Sable

1 Answer

Where can I get instructions to replace a driver side review mirror on a 2002 mercury sable. It is heated with puddle light. I have the mirror and want to replace it myself.


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jun 25, 2009 | 2002 Mercury Sable

1 Answer

Need to replace 2002 mercury sable LS driver-side mirror


screws on inside,but more i cant tell you as not many of them to the euro here in spain

Mar 31, 2009 | 2002 Mercury Sable

1 Answer

Replace driver and passanger side power mirrors


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 29, 2009 | 1999 Mercury Sable

1 Answer

1995 Mercury Sable driver's door mirror broken


You can get the glass from you friendly neighborhood junk yard and it should snap right in!

Jan 05, 2009 | 1995 Mercury Sable

1 Answer

Side view mirror replacement


you will have to remove the door panel to get at the bolts from the inside of the car.joe

Nov 21, 2008 | 1997 Mercury Sable

Not finding what you are looking for?
1995 Mercury Sable Logo

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

fordexpert

Level 3 Expert

5481 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...