Question about 2004 Ford F150

1 Answer

Have 2004 f150, replace rear brakes and rear parking brake. rear parking break is hanging up on me

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 430 Answers

This generally happens as a result of too much clearance between the shoes & the hub and it causes the complete set of shoes to pivot. You will need to fine tune the adjustment to where the shoes have just the minimum of clearance & they won't be able to bind/hang up any more. good luck

Posted on Jan 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHY PARKING BREAK DEFAULT LIGHT 2004 XJ8 ?


if the park brake warning is on and the park brake is inop. there are several common problems with this system, the most likely causes are 1 the rear brake caliper sliders are part siezed or the pads siezed in the caliper frame 2 the wiring to the park brake motor open circuit or rubbed through on the rear subframe.3 the park brake motor has failed, you really needto get the fault codes out of the park brake module if the above checks out ok the above faults i have found to be the cause 9 out of 10 times. hope this helps.

Aug 09, 2014 | 2004 Jaguar XJ

1 Answer

What would cause my parking brake pedal to remain on the floor board in my 2004 F150 Ford?


Check your brake master.You may have a worn out brake piston or rubber cup, or damaged return spring.

Oct 23, 2012 | 2004 Ford F150

1 Answer

I lowered my 2004 F150 4x4 3 inches in the rear only it now has a vibration when braking any answers out there???


why did u lower a 4x4? maybe its lower in the back than the front and throwing off the center of gravity and cause braking problems, is it like the brakes are draging the truck?

Nov 27, 2011 | 2004 Ford F150

1 Answer

Sorry on 2004 ford exploer xlt 2 wheel drive. cant get rear rotor off.


most likely the parking brake shoes on the inside drum of the rotor are hanging up you can grind the heads off the nails that hold the assembly together and decide after you get it all apart if you want or use your parking brake most people throw them away.

Jul 31, 2010 | 2004 Ford Explorer

1 Answer

How do i adjust the rear parking brake on a 2004 chevy silverado 2500 hd 4x4


on the 04 chevy silverado theirs cable equilizers that stable your cables of your parking brakes check to see if those arent loose or damaged in anyway if so replace if not remove the rear wheels and use a brake spoon to spin the adjuster nut on the o4 chevy their is not slots in the sides of the brake drum or the dust shield so it is a hastle trying to find if your on the adjuster or not but once you tinker with it for a while you will get the hang of it

Jul 01, 2010 | 2004 Chevrolet Silverado

1 Answer

2004 F150 brakes


take out the air from the system, the break pump is unable to retract the breaking fluid if there's air in it

Mar 13, 2010 | 2004 Ford F150

1 Answer

Remove and replace rear brake shoes on 2004 honda accord


Brake Shoes Removal & Installation To Remove:
  1. Raise and safely support rear of vehicle.
  2. Remove rear wheel assemblies.
  3. Release parking brake.
  4. Remove brake drum.
Rear brake shoe assembly


6c57c70.gif
  1. Using an appropriate brake spring tool, unhook upper return spring from rearward brake shoe.
  2. Push retainer springs IN and turn to remove tension pins.
  3. Lower brake shoe assembly and remove lower return spring.
  4. Remove brake shoe assembly from back plate.
  5. Disconnect parking brake cable from lever and remove brake shoe.
  6. Remove parking brake lever from brake shoe.

To Install:

d36458c.gif
  1. Install parking brake lever to rearward brake shoe.
  2. Secure lever to brake show with a NEW U-clip.
  3. Pinch U-clip closed.
  4. Connect parking brake cable to rearward brake shoe.
  5. Install self-adjuster lever spring on front brake shoe.
  6. Assemble clevises, adjuster bolt and upper and lower return springs.
  7. Apply a light coat of grease (Molykote 44MA or equivalent) to sliding surfaces.
  8. Install brake shoe assembly onto back plate.
  9. Install tension springs.
  10. Using an appropriate brake spring tool, unhook upper return spring to rearward brake shoe.
  11. Install brake drum.
  12. Install rear wheel assembly.
  13. Lower vehicle.
  14. Adjust self-adjusting brakes by pressing brake pedal several times.

Jul 13, 2009 | 2004 Honda Accord

1 Answer

I need a schematic for the rear brakes on an F150 super cab with 4.6L automatic trans 4wheel drive


Drum, Rear Brake System Standard Rear Brake
9969082.gif
Item Part Number Description 1 2069 Brake Shoe Hold-Down Spring Pin 2 — Rear Wheel Cylinder Retaining Bolt (2 Req'd) 3 — Washer (2 Req'd) 4 — Anchor Pin (Part of 2211) 5 — Wheel Cylinder 6 2028 Brake Shoe Anchor Pin Guide Plate 7 2A637 Parking Brake Lever 8 2296 Brake Shoe Retracting Spring (Short) 9 2296 Brake Shoe Retracting Spring (Long) 10 2200 Rear Brake Shoe and Lining (Secondary) 11 — Washer 12 2106 Parking Brake Lever Pin Retainer 13 — Brake Shoe Adjusting Lever Cable Guide 14 2A642 Primary Brake Shoe Parking Brake Lever Link 15 2A601 Parking Brake Link Spring 16 2068 Brake Shoe Hold-Down Spring 17 2A176 Brake Shoe Adjusting Lever 18 2048 Brake Shoe Adjusting Screw Socket 19 2047 Brake Shoe Adjusting Screw Nut 20 2041 Brake Adjusting Screw 21 2049 Brake Shoe Adjusting Screw Spring 22 2200 Rear Brake Shoe and Lining (Primary) 23 2A178 Brake Shoe Adjusting Lever Cable 24 2211 Brake Backing Plate
Heavy Duty Rear Brake
6dcb5d2.gif
Item Part Number Description 1 — Rear Wheel Cylinder Retaining Bolt 2 00538 Lock Nut 3 2212 Rear Brake Backing Plate 4 2262 Rear Wheel Cylinder 5 2A642 Primary Brake Shoe Parking Brake Lever Link 6 2A601 Parking Brake Link Spring 7 2A637 Parking Brake Lever 8 2106 Parking Brake Lever Pin Retainer 9 — Parking Brake Lever Bolt 10 — Secondary Shoe Assembly 11 2A179 Brake Shoe Adjusting Lever Cable Guide 12 2068 Brake Shoe Hold-Down Spring 13 — Adjusting Lever Pin 14 — Adjusting Lever Return Spring 15 2A176 Brake Shoe Adjusting Lever 16 2047 Brake Shoe Adjusting Screw Nut 17 2049 Brake Shoe Adjusting Screw Spring 18 2041 Brake Adjuster Screw 19 — Primary Shoe Assembly 20 2068 Brake Shoe Hold-Down Spring 21 2200 Rear Brake Shoe and Lining 22 2035 Brake Shoe Retracting Spring 23 2A178 Brake Shoe Adjusting Lever Cable 24 2092 Brake Adjusting Hole Cover 25 2069 Brake Shoe Hold-Down Spring Pin
The rear drum brakes:
  • Have internal shoes that expand against the brake drum (1126).
  • Are a single-anchor type.
  • Are actuated by one rear wheel cylinder (2262).
  • Have two pistons in the rear wheel cylinder (2261). One exerts force against the upper end of the primary shoe; the other exerts force against the upper end of the secondary shoe.
  • Adjust rear brake shoes and linings (2200) automatically.
  • Need manual brake adjustment if the adjusters are not operating properly or after the rear brake shoes and linings have been replaced.
When the brake pedal is applied, hydraulic fluid pressure forces the pistons in the rear wheel cylinder outward, moving the rear brake shoes and linings against the brake drum.
The rear drum brake system includes the parking brake mechanism. Refer to Section 206-05 .

Apr 04, 2009 | 1997 Ford F150 Regular Cab

1 Answer

Ford F150 brake light stays on.


probaly the parking brake not fully released or the cable is sticking.
Parking brake is wired to the brake light too.

Mar 22, 2009 | 2004 Ford F150

1 Answer

2002 F150 brake/turn signal


if u checked all the fuse's both in the cab and under hood and the wiring harness at rear of truck for any damage, I suspect the turn signal switch is defective.

Mar 05, 2009 | 2004 Ford F150

Not finding what you are looking for?
2004 Ford F150 Logo

726 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...