Question about 1992 Chevrolet Lumina

1 Answer

My Battery Died

How do I change the battery in my 92 Chevy Lumina. I'm scared that after I remove the cross bar the battery will be bolted down!

Posted by on

  • Brian Anderson May 11, 2010

    the cross bar should be the only way the batter is held down. Take the battery to an autoparts store and have them load test it to make sure your battery bad or if you have another issue. Good Luck

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 4 Answers

And it wil be with a 14mm retaner bolt all you have to do loosen it an remove the cables an take out he battery

Posted on Jan 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reinstall a battery in a 2001 chevy lumina? there is a wedge of some type i don't know where it goes


1. Place the battery in the car so that the red cable is closest to the positive (+) post and that the black is closest to the negative or (-) post.

2. once the battery direction is determined, the wedge can be put in place. The wedge normally fastens to the bottom battery tray and at the same time sets along side of or in a small recess cutout in the lower part of the battery. There should be a bolt or nut that fastens the wedge to the battery tray and allows one parts of the wedge to hold the battery at the same time. Place the wedge on the battery where it is to hold the battery and then tighten the nut/bolt down which should hold the battery down tight. Sometimes the nut or bolt used to hold the wedge down will get rusty and needs to be sprayed with a rust penetrant like "pb blaster". PB blaster can be purchased at most auto part stores and walmart.

Jan 29, 2013 | 2001 Chevrolet Lumina

2 Answers

HOW TO TAKE OUT BATTERY 2003 OLDS SIL


Remove wiper assembly plastic cover. Then remove front bolt that holds the cross brace bar over the battery. Loosen the bolt at the other end of the brace bar and rotate brace bar from over the battery to a new location and proceed to remove the plastic battery hold down mount on bottom of battery.Disconnect the negative then positive battery cables from the battery then rotate battery up and out of compartment -- this is a very tight fit. It will come out and the clearance is very small. This is a neat challenge. Be sure to buy proper size battery for replacemeent

Read more: http://wiki.answers.com/Q/How_do_you_remove_a_battery_from_an_Oldsmobile_Silhouette#ixzz1noNX2HXJ

Feb 29, 2012 | Cars & Trucks

1 Answer

In what order do I need to disassemble my 1999 Chevy Lumina to change the battery and add an inline disconnect switch as the car sits for long periods of time without being started. Thanks, Ron


You'll need to remove the cross bar and the air filter box. You can then remove the washer fluid reservoir. Then disconnect the negative cable and the positive cable from the battery. Remove the battery hold down and then the battery can be removed.

As far as installing a battery disconnect they are all a little different so without seeing what you have it would be hard to describe how to install it.

Jan 19, 2011 | Chevrolet Lumina Cars & Trucks

1 Answer

2003 Impala: HOW DO I CHANGE BATTERY 2005 CHEVROLET IMPALA...


The battery is under the hood, just behind the passenger headlight.
There is a black bar that crosses over the battery and goes back towards strut tower. Remove this bar and the three bolts; probably a 12 or 13mm socket.
Remove the negative (black) battery cable with an 8mm socket or wrench. A 5/16" should work also.
Then remove the positive (red) cable with same socket.
Remove the battery clamp and bolt. Probably a 12mm socket with extension.
It's tight, but the battery can be removed.
Reverse instructions for installing the battery. (That includes hooking up the red battery cable first, then the black cable.)

May 16, 2010 | 2003 Chevrolet Impala

1 Answer

How do you change the battery on a 2004 chevy venture


You have to remove the round support bar. Two bolts in front one back by hood hinge. The bar slides out of the relay box, and the relay box lays over toward the motor.
There is a hold down on the backside of the battery at the bottom that needs to be removed, then take battery posts bolts out. Remove the battery put new one in, put the hold down bolt back in.
Connect battery posts up lay the relay box back put the round support bar back thru it put bolts in it and tighten everything back up and you are done.
Thank you for using fixya

Apr 07, 2010 | Chevrolet Venture Cars & Trucks

1 Answer

How to change the battery on a 1999 Chevy Lumina LTZ


You will need an extra long extension for your socket wrench. Or you can just stack a few small ones together. You will have to extend your reach from above the battery.
Be careful not to touch the positive post when your socket is on the bolt. Good luck

Apr 04, 2010 | 1999 Chevrolet Lumina

1 Answer

HOW DO YOU REPLACE A STARTER FOR 1991 CHEVY LUMINA


1) Disconnect cable from negative battery terminal
2) Raise vehicle front and suitably and safely support.
3) Remove cover from starter wiring (small right angle-like black plastic cover).
3) Loosen large wiring harness (underneath starter) so that it can be moved out of the way.
4) Remove outer nut and wires from solenoid.
5) Remove outer nut and wires wires from starter.
6) Remove two (2) screws retaining plastic flywheel cover and cover. You will need to do this - otherwise you will be unable to remove the front bolt holding the starter to the engine block. This cover is a small black plstic piece located where starter penertates the flywheel cover.
7) Remove (2) bolts retaining starter to the engine block. One is accessable towards the front of the starter/vehicile and the other (long one) is towards the rear of the vehicle - just behind the frame cross member.
8) Position starter so that if can be dropped down (flywheel gear part first).
9) Reverse the above instructions to install the new starter/solenoid

Dec 22, 2009 | 1991 Chevrolet Lumina

1 Answer

1993 chevrolet lumina euro how to remove the battery


remove support brace and washer tank, 3 bolts in brace, 1 bolt and a push in retainer in washer tank, 1 battery hold down bolt, tilt battery up on small side to remove

Jul 16, 2009 | 1995 Chevrolet Lumina

1 Answer

Where is the horn in a 1997 chevy lumina


remove air cleaner assembly, remove the 2 bolts from cross brace, then move brace out of the way, if necessary remove windshield washer tank,remove battery,now you have access to horn!!

Jun 28, 2009 | 1997 Chevrolet Lumina

Not finding what you are looking for?
1992 Chevrolet Lumina Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...