Question about Chevrolet Silverado 1500

1 Answer

I have a 1990 Silverado 1500.. I replaced the tail light assembly and connector as they were rusted beyond repair. I replaced the flasher also. I still do not have a turn signal but I have running lights I'm not sure if I have brake lights. I do have backup lights. What could be the problem?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 4 Answers

Check all youre grounds and all youre fueses,on some modle there is a grond in the tail light caviteis.

Posted on Jan 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove tail light assy. from 2003 chevy.silverado


1 open tailgate-
2 on the inside edge of the fender there are two screws- remove them
3 pull straight back on light assembly- it will pop out of hold clips
4 replace burned out bulb =twist bulb holder to remove from assembly
5 reverse order to install

Sep 15, 2011 | 2003 Chevrolet Silverado 1500

1 Answer

We checked fuses and relays, bulbs and the rear lights still dont work.


the newer gms have kind of a curcuit borad type lenz assembly,i took mine apart and put screws in it to make it thighter and it worked ,check make sure you getting voltage to the connector put on 4 way flashers and tail light on ,you can buy cheapper assembly at surefit aftermarket if you dont want to try to fix it i wish you could fit the old type lense ,they were fine for many years

Nov 29, 2010 | 2003 Chevrolet Silverado 2500HD

2 Answers

How do I replace a burned out backup light on a 1998 cheverolet silverado c-1500 pickup truck?


Removal & Installation Cab/Chassis gm-06-00-1071.gif

To Remove:
  1. Disconnect lamp assembly electrical connector.
  2. Remove nuts and lamp assembly from bracket.
  3. Remove lens screws.
  4. Remove lens, gasket and bulb.
To Install:
  1. Install lamp assembly and nuts to bracket.
  2. Connect electrical connector.
  3. Install bulb, gasket and lens.
  4. Install lens screws.
Except Cab/Chassis gm-06-00-1075.gif

To Remove:
  1. Lower endgate.
  2. Remove 2 tail/turn signal lamp assembly retaining screws.
  3. Rotate tail/turn signal lamp assembly and remove from vehicle.
  4. Disconnect lamp assembly electrical connector.
  5. Remove bulbs by pulling straight out of bases.
To Install:
  1. Install bulbs by pushing straight into bases.
  2. Connect electrical connector.
  3. Install tail/turn signal lamp assembly to vehicle and secure with 2 screws.
prev.gif next.gif

Jul 17, 2010 | 1998 Chevrolet C1500

1 Answer

How do you replace brake light bulb on a 2006


you need to remove the 2 torx screws (accessable when you open the tail gate). once they are out, you are able to pull the whole tail lamp assembly out of its position, and then turn the socket counter clockwise to remove it from the assembly. replace the bulb, and reassemble. good luck!

Jun 21, 2010 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

I need to know the colors and purpose of my 2000 chevy silverado 1500 5 wires for the trailer harness


off the top of my head international standard
RED STOP
GREEN RIGHT HAND FLASHER
YELLOW LEFT FLASHER
BROWN SIDE /TAIL LIGHTS
WHITE EARTH
BLUE AUXILIARY

BROWN PARK /TAIL LIGHTS

Nov 10, 2009 | 2000 Chevrolet Silverado 1500

1 Answer

93 GMC Suburban, No Tail Lights


Check the trailer plug ground first. If in doubt. Ground in another location. Make sure the area is free of rust and the ground is tight.

May 10, 2009 | 1993 GMC Suburban

2 Answers

Brake lights quit working


Tail lights acting insane?

We had the same issue with our 2000 Pontiac Montana. Brake lights, turn signal lights, running lights, back-up lights and emergency flasher didn’t work at all or operated at random. The cause: poorly designed aluminum contacts on the tail light circuit board and wiring harness connector arced over and disintegrated with normal use.

Pull the tail lamp assembly, remove the electrical connector and look for burned contacts on the connector plug and the connector socket (they call this long plastic piece with the socket the circuit board: it includes the four bulb sockets. Replace the circuit board and the wiring connector.

You can DIY this job with basic auto mechanical/electrical skills and tools. The two circuit boards and the two connectors set me back $230 (2009 cost) for new parts. The electrical contacts on the factory replacement parts are improved.

I needed a T-30 torx driver to remove the tail light assembly (you need this to change out bulbs, too), wire cutters, wire strippers, electrical tape and an electrical lug crimper to do the job.

Aug 02, 2008 | 2003 Pontiac Montana

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...