Question about 2002 Mazda B-Series

1 Answer

How do I disconnect the pressurized fuel line on Mazda B2300

I'm looking to disconnect the fuel line from the fuel rail to see if it's pumping gas from the tank or if my fuel pump has gone bad. The vehicle is a 2004 Mazda B2300 truck. The Fuel line is pressurized and I'm not sure how the connector dissconnects. thanks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 24 Answers

You need a special tool called a fuel line disconnect tool.You should be able to get one for your specific vehicle at an auto parts store.However that is not the correct or safest way to check for a bad fuel pump.Check out this link for more info.
http://www.fuel-pumps.net/fuelpumpsfaq.html

Posted on Jan 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

WE PUT NEW FUEL PUMP ON B2300 MAZDA 1994 YOU PUT GAS IN THE THROTTLE AND IT RUNS BUT WILL NOT START NO OTHER WAY


New pump may be bad--it happens. There should be a check valve that keeps fuel from draining back when you turn it off. If this is not working it could cause this.

Oct 17, 2016 | Mazda B2300 Cars & Trucks

1 Answer

How do I tell if fuel pump is bad on a 2000 Mazda millennia super charged car and location and replacement...someone said I could bypass with an in line fuel pump


Go under hood.. and locate your fuel rail. And find the pressure release valve. Turn key to on position and depress the valve and it should spray gas... if not check.. fuse and relay for fuel pump... pump is in the tank..

Sep 01, 2016 | 2000 Mazda Millenia

2 Answers

How to check fuel pressure 91 geo storm gsi


1.6L DOHC (same way as the ISUZU impulse ) same car.
4XE1 engine twin cam.
has MPI injection with fuel rail, regulator and loop
disconnecting the feed line and stuffing it with guage only does 1 of 5 tests. done on MPI. it does JUST the shut test.
the correct way it to check it at the filter or rail tests ports on most cars.
in some cases you must add it.
they sell banjo fittings with test ports at summit racing dot com.
so the first question on all MPI cars, is , where is the stock fittings.
other cars the rail has a schrader valve or a plugged hole to add one. (test port) did you look first for this?
to test the FPR, unplug the vacuum line running
and pressure will jump up 6 to 10 psi.
this simulates wide open throttle pressure, a key fact in getting full power from engine, i test cranking presssure, idle, 3000rpm
and wot pressures to be sure the PFR is working, not just the pump.



the spec at the rail is.

Late 1986 to 1993 I-TEC MPFI system (after VIN 0908197)
Regulator vacuum line connected-36 psi
Regulator vacuum line disconnected-42.5 to 45 psi

the shunt test can hit 60 pis easy. do so for only 5sec.
as this stresses the pump .

the only rail drawing , shows no fittings (cheap buggers)



not even a cheap plug...

24024302-wtht4tipiqsxmsfaksxjx4vs-4-0.jpg below is the twin cam, 1.6L
buy a TEE feeting, and put it at upper, red arrow.
use clamps rated for fuel injection, not chezzy screw band clamps as seen on carb cars. use the correct parts.
or you will get leak and it will not be pretty,
the filter as at 14 ID. this is the pressure feed side of the loop.
30 to 60psi , so all parts must be rated over 60, psi, (100psi is a nice goal)

24024302-wtht4tipiqsxmsfaksxjx4vs-4-1.jpg

now the words directly from the IMPULSE FSM.

Testing
  1. Relieve the fuel pressure.
  2. Disconnect the fuel line near the engine and install fuel pressure gauge T-connector in the line.
  3. Connect the fuel pressure gauge to the T-connector.
  4. Start the engine and check the fuel pressure, it should be:
  5. 4XC1-Turbo and DOHC I-Mark, G200Z Impulse: 35.6 psi with the vacuum hose of the pressure regulator disconnected and plugged. 28.4 psi with the vacuum hose connected and at idle.
  6. 4ZC1-Turbo, 4ZD1 Impulse and 4ZE1 engine: 42.6 psi with the vacuum hose at the pressure regulator disconnected and plugged. 35.6 psi with the vacuum hose connected at idle. Disconnect the VSV before checking pressure.
  7. V6 engine: 9.13 psi at the fuel pressure line after the fuel filter.
  8. 4XE1 SOHC and DOHC engine: Flow test, disconnect the hose from the EFI fuel feed line at the engine and place in a suitable container. Apply battery voltage to the fuel pump. Pump should supply 1/4 quart (0.24L) within 15 seconds. Pressure test, connect a pressure gauge in the fuel pressure line after the fuel filter, located at the driver's side frame rail. Disconnect the vacuum hose from the pressure regulator. Apply battery voltage to the pump. After the pump stabilizes, the pressure should be 35-38 psi (245-256 kPa) and hold steady.

Apr 06, 2014 | Geo Storm Cars & Trucks

1 Answer

Replace fuel pump in mazda truck B2300 1996


I have seen when the fuel pump goes out, it will suck.junk up in the lines and.clog the fuel filter, so maybe.try changing that first.

did you plug.all the.wires back into.the.new.fuel pump,.do you hear the.fuel pump run when you turn your key.to the on position? now if you push your gas pedal to the.floor this will stop the.fuel from being pumped, have you checked to.see if you have fuel pressure in the.fuel rails, by either a fuel gauge, or be pressing in the Schrader valve ?\'

Dec 05, 2013 | Mazda B2300 Cars & Trucks

1 Answer

I have a 2001 Mazda protege. Has new fuel pump and pressure regulator, I have cleaned fuel tank , lines, rail, and injectors. Relays and fuses are good. I took breather off and sprayed fuel into throttle...


sounds like an electrical problem .pump isnt coming on .turn on key listen for fuel pump to come on for 10 seconds then shut off on its own. If you dont hear the pump then its probley fuel relay . next check wires are plugged into fuel pump. lots of cleaning ?? is the fuel rail screen plugged ???? disconnect before rail if the pump comes on next. turn on key check for fuel pumping out line .

Nov 21, 2013 | Cars & Trucks

1 Answer

How do you get the fuel return an fuel line off the motor of a 94 Mazda b2300


your motor is the same as the ranger you need the fuel line disconnect tool sold at all auto stores they are around twenty bucks they slip in the connecter and release the spring allowing you to remove line

Apr 23, 2012 | 2005 Mazda B2300 Regular

1 Answer

How do I check the fuel pressure on a 2000 model mazda millenia with a 2.3 engine in it


Hi.

You connect a fuel pressure gauge like this to the pressure rail. Pressure in this car must be between 35 and 45 psi. If pressure is too low look for kinked fuel lines and eventually replace the pump. If the pressure drops down more than 10 psi in five minutes or if the pressure is considerably higher than that replace the fuel pressure regulator. Below the parts that may need testing:

ginko_261.gif

1. Fuel tank
2. Shut-off valve
3. Non-return valve
4. Fuel pump
5. Fuel pump (Transfer)
6. Fuel filter (High-pressure)
7. Injector
8. Pressure regulator
9. PRC solenoid valve
10. Fuel pump relay
11. Fuel pump resistor and relay (KJ model)

Aug 04, 2011 | 2000 Mazda Millenia

2 Answers

I need to access the fuel injectors in my 98 wrangler, but i dont know how to get to them


FIRST NEED TO RELIEF FUEL PRESSURE REMOVE GAS CAP RELIEF GAS PRESSURE IN FUEL TANK.THEN REMOVE FUEL PUMP RELAY THEN START ENGINE UNTIL IT DIES LACK OF FUEL,CRANK ENGINE OVER FEW MORE TIMES MAKE SURE FUEL OUT OF FUEL LINES. THEN YOU NEED TO REMOVE AIR CLEANER CROSS OVER TUBE ABOVE FUEL RAILS. DISCONNECT LINES AT THE ENDS OF THE FUELS RAILS ASSEMBLY. MARK AND DISCONNECT THE FUEL INJECTOR WIRE HARNESS CONNECTORS. REMOVE THE FUEL RAIL RETAINING BOLTS, DISCONNECT THE VACUUM LINE FROM THE FUEL PRESSURE REGULATOR. REMOVE THE FUEL RAIL ASSEMBLY FROM THE ENGINE. IF YOU HAVE AUTOMATIC TRANSMISSION REMOVE THE THROTTLE PRESSURE CABLE AND BRACKET TO REMOVE THE FUEL RAIL ASSEMBLY.TO REMOVE FUEL INJECTORS JUST REMOVE CLIPS THAT RETAIN FUEL INJECTORS IN FUEL RAIL. BESURE GO TO DEALERSHIP BUY NEW FUEL INJECTORS O - RINGS.APPLY A SMALL AMOUNT OF ENGINE OIL TO THE O - RINGS TO AID IN INSTALLATION. TORQUE FUEL RAIL BOLTS TO 100 INCH LBS.

Jun 19, 2011 | 1998 Jeep Wrangler

1 Answer

My 92 double cab mazda b 2600wont run unless you pore gas into inlet manifold. any one have an idea . the motor is injected


This sounds like your electronic fuel pump is bad.Check fuel pressure by purchasing a inexpensive kit around 10 to 15 dollars. Disconnect fuel line by the fuel rail. Install your tester.It should read around 30 psi. Also check filter element.

Oct 15, 2010 | 1988 Mazda B2600 Cab Plus

1 Answer

Hi I have a 94 mazda B2300 4 cylinder, Why very poor gas mileage


check the fuel filter or a possible leak in the fuel line or vacuum lines.your exhaust could be clogged causing too much back pressure

Mar 09, 2009 | 1994 Mazda 2WD B Series Pickup

Not finding what you are looking for?
2002 Mazda B-Series Logo

438 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...