Question about 2000 Chevrolet Blazer
On a 2000 blazer you have to remove the dash to get to it
Posted on Nov 07, 2014
I think you can get to that one by removing glove box door.like four screws holding it in
Posted on Jan 31, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Blend door not working.
The bleed door controls air temp not where it comes out, dash, floor, defroster, this is most likely a mode control switch problem, that switch is on the ac control head.
Posted on Sep 23, 2008
SOURCE: Blend door
ok first put you front seat down and back raise steering wheel . now lay on you back with you head in the drivers floor board. look up see 2 screws remove them and the panel they hold on . look to left main wire harness needs to be moved to the right , up and behind it is th blend actuator 7/32 socket to remove it then manually turn the white peg , total labor 30 min
Posted on Dec 15, 2008
had this problem before... recheck part#....is it for EATC or MANUAL...??? eatc on a manual will only go to half way...sounds like they gave you the wrong part....its a pain to replace wasn't it.....hope this helped you...GL
Posted on Jul 06, 2009
I recently did mine, I hear you can do it without taking the entire dash apart but I had no luck with it myself. I have to get ready for work but, on mine it was located down and to the left of the radio. its a white box...are you hearing a clicking noise or something? I had to roll the entire dash back and it was still a major pain getting it out.
Posted on Dec 07, 2009
Tips for a great answer:
Jun 19, 2017 | Mercury Cars & Trucks
Nov 10, 2016 | 2009 Lincoln MKS
Dec 26, 2015 | Chevrolet Monte Carlo Cars & Trucks
Dec 24, 2014 | Chrysler Cars & Trucks
Nov 26, 2011 | 2006 Kia Amanti
Fig. Remove the floor air outlet duct extension (1) from the floor duct (2)
Disconnect the electrical connection at the blend door actuator (#10 in pic below).
Fig. Blend door actuator and related components
Remove the blend door actuator mounting screws from the HVAC module.
Remove the blend door actuator as an assembly with the actuator cam.
Fig. Remove the blend door actuator mounting screws from the HVAC module
Picture of actuator:
Dec 07, 2010 | 2004 Chevrolet Avalanche
Oct 07, 2010 | 2003 Mercury Grand Marquis
Nov 07, 2009 | 1995 Jeep Grand Cherokee
Oct 18, 2009 | 1999 Chevrolet Silverado 1500
Sep 09, 2009 | 1998 Cadillac Seville
485 people viewed this question
Usually answered in minutes!