Question about Chrysler New Yorker

1 Answer

I was just wondering if anyone has had any dealings with "Restore" oil treatment for cars? I have heard a lot of good things about it but was wondering if its real or just hype?

Posted by on

  • wood Jan 31, 2010

    Thanks very much. My problem is not so much fuel consumption, but rather loss of compression. I have a '92 Chrysler with nearly 175K miles and I'm thinking the engine just isn't as "tight" as it was, and I was looking to help restore some of the tightness that has gotten lost with the wear and tear of that kind of mileage. Thanks very much again

  • wood Jan 31, 2010

    Thanks for the help!

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

That is usually the Best Fix if you Car is Consumes a lot of Fuel. I have a Client who Claims that his Opel Astra 1.4 consumes 10L of Fuel every 100KM. This was really Improved when he tried some Engine Restore Oil Treatment and a Fuel Injection Cleaner.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Jan 31, 2010

  • taran_2005
    taran_2005 Jan 31, 2010

    Thanks for your response!!

    In this Case, if you wish you could try it as i have seen certain Improvements but Remember that is a Temporary Fix. If you'd like to try an treatment in the oil they do make somethings.. you can try a little (engine restore) sell at most auto part stores.. i don't really recommend as i am a believer in no additives to any engine, but you can try if needed.


    Let me know, if needed further assistance.

    Hope i helped you.

    Thanks
    for using ' Fixya ' and have a nice day!!


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 oldsmobile intrigue turns off right when i turn it on


Is there an anti-theft system installed? The aftermarket ones cause lots of woes. Hmm, you tried the brake pedal thing, but did you try the rear view mirror thing in conjunction with the spare tire thing? This works sometimes, I've heard.

Jun 20, 2012 | 1998 Oldsmobile Intrigue

1 Answer

What is a good fuel treatment for a kia rio 2004 car?


A good fuel treatment would be Lucas or any of the additives really that are offered at auto parts stores. The best thing you can do that will benifit you're vehicle even more is to get a 3 step fuel system cleaning. The usual price for that is 50 to 70 dollars, but is direct cleaning of your injectors versus fuel treatment. Either way is ok, I use a treatment after every oil change.

Hope this Helps!

Jun 08, 2011 | 2004 Kia Rio

1 Answer

I heard a ticking and discovered that I was low on oil. I put oil in but the ticking is continuing to go on what should I do


You have a couple of options; You can add a product like Rislone to help loosen up sticking lifter,which low oil probably caused. Or just do a good healthy oil change. I'd do the Rislone treatment first, then within next couple of hundred miles do an oil change.

Feb 21, 2011 | 2002 Ford Explorer

1 Answer

When I start the engine first thing in the morning it makes a clattering sound,until it runs for a minute


the clattering is most likely valves rattling until the oil gets up to top of engine,recommend change the oil and filter,use a good filter like fram oil filter,i've always used castrol 30 weight oil in winter,then summer 40 weight, also recommend you add lucas oil treatment,1 bottle,add with your oil change for top end lubrication,the oil stays and clings onto valves and adds a whole lot more of top end lubrication to your engine than just regular oil.it's just a treatment,i have a 1994 ford explorer with 450.000 miles on it.just trying to see how far i can go with original motor.but i always use castrol oil,fram oil filter and always add lucas oil treatment every time i change my oil.thank you for choosing fixya.com good luck!

Jan 05, 2011 | 2002 Chevrolet Tahoe

1 Answer

Overall maintenance and tips to keep my lexus 1992 es 300 running smoothly it has 230000 miles. I get oil changes every 5000 miles put good oil in the car. I put good gas in the car and every time i fill...


I would not mess with Oil Treatments, what you have been doing is fine. I would change the fuel filter, if it hasn't been done for a while. Also a transmission service. Check your belts and hoses.

Jun 14, 2010 | 1992 Lexus Es 300

1 Answer

It is very sluggish and has no power compared to wen i bought it...what could be the problem?check engine light is also on


OIL TREATMENT,AND CARB/FUEL IJECTOR CLEAN(SUPER CONCENTRATED) 1/2/ TANK.THE OIL TREATMENT I RECOMMEND HIGHLY A CAN CALLED "RESTORE" OIL TREATMENT IN A SILVER CAN.THAT WOULD ALSO CLEAR UP YOUR "CHECK ENGINE LIGHT". "RESTORE"OIL IS FOUND AT ANY AUTO ZONE OR PARTS STORE! HOPE THIS HELPS!!!:):):)

Dec 17, 2009 | 1998 Chevrolet K1500

1 Answer

O k whats the deal, Tribute v6 has 178,000 miles. Some people say use synthetic oil and some say don't. I'm confused, what do I use?


You want to use the oil the manufacturer originally used, switching oils is bad on a vehicle and if Mazda wanted a different oil used, they would have originally put it in it. Now something good to mix with your oil is Lucas Oil Treatment. That helps with aging motors and High mileage motors, but do not switch your oil.

Jul 25, 2009 | 2001 Mazda Tribute

1 Answer

Diesel engine... more power.?


I have heard it, but I would advise using the fuel treatment from the auto parts store, that is guaranteed, and made for cleaning. The gas deal could possibly foul your sensors from the cumbustion ratio, and may cause other problems. I would suggest buying a can of "seafoam" I love it, you can put it in your oil, fuel, and intake, and you wouldn't believe the garbage that comes out of your exhaust and in your oil after about 3000 miles. I usually only put it in my oil, and gas, but never tried the intake. Seafoam is the way to go. Should find it at any parts or hardware store. its in a white steel can. Good luck

Mar 03, 2009 | 1992 Nissan Pathfinder

1 Answer

Knocking lifter


Give it a Seafoam treatment - the stuff is available at the auto parts stores and at Walmart. Instructions are on the can - it's an easy procedure that can work wonders on an older engine.

Aug 16, 2008 | 1999 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...