Question about 1990 Geo Prizm

1 Answer

How do you change a heater blower motor in a 1990 geo prism and do you have pictures of it?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 68 Answers

Go to kragen.com to find the replacement part. It will show a picture. It is usually located behind the glovebox and the heads of the bolts that hold it in are looking right down at the floorboard. In other words it is easy to get to. Don't forget to have the ignition switched off and disconnect the blower power wires before you remove it. You don't want to damage the connector. Best of luck!

Posted on Jan 31, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: blower motor location 1990 geo prizm

In my 1992 it is underneath the dash on the passenger's side, but you have to take the whole front panel including the glove box off to access it. When that is done there is a rectangular housing and a more circular housing. On the bottom of the circular housing there are three screws that hold the blower motor up. Remove the screws and it will drop right out.

Posted on Dec 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix wiper arms 1990 geo prism


both wipers dead, means both cowl arms are dead.
look in top cowl vents there, its i clear view, look are they moving
if not the motor is bad, or bad gear box in same.
http://www.fixkick.com/wipe-wash/index.html
or the lower arm fell of the gear box shaft.? look ?

Jul 07, 2014 | 1990 Geo Prizm

1 Answer

1990. How do I reinstall the cross member?


im tire of look at this old post
jacket and bolt it, there.

Apr 14, 2014 | Geo Prizm Cars & Trucks

2 Answers

Where is the location of the speed relay for blower motor on a 1990 geo prizm


Not a relay but a resistor pack, and it should be mounted in the heater case, close to the blower motor-follow the wires from the blower motor back to the resistor pack. Unplug the connector and remove the screws holding the pack to the case, to remove and replace.

Mar 22, 2013 | 1990 Geo Prizm

1 Answer

Where is the brake light switch for a 1990 Geo Prism located?


If it is not on the brake pedal,under the dash,then it is under the hood on the master cylinder or a line at the master cylinder.

Aug 17, 2010 | 1990 Geo Prizm

1 Answer

1994 geo prism, fuse blew, I don't have manual


the only fuse for the starter is not located in the fuse box it is located in the positive wires that go to the starter its called a fusible link and when then amperage of the starter exceeds the fusible link rating the fusible link blows the link is usually located inthe positive wire to the starter and at some point fatter then the wire itself

May 04, 2010 | 1990 Geo Prizm

2 Answers

Blower motor location 1990 geo prizm


In my 1992 it is underneath the dash on the passenger's side, but you have to take the whole front panel including the glove box off to access it. When that is done there is a rectangular housing and a more circular housing. On the bottom of the circular housing there are three screws that hold the blower motor up. Remove the screws and it will drop right out.

Dec 14, 2008 | 1990 Geo Prizm

1 Answer

1990 geo Prizm fuse location for the heater blower


the heater blower motor is run through two fuses. the gauge fuse in fuse block 1 and the ac fuse in fuse block 4.

Aug 28, 2008 | 1990 Geo Prizm

2 Answers

Location of fuel filter-1990 Geo Prism


Right under the master brake cylinder, its really hard to replace it. It has 2 screws, one bolt on top and the bottom one needs to be screwed off under the car

Aug 06, 2008 | 1990 Geo Prizm

Not finding what you are looking for?
1990 Geo Prizm Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...