Question about Mercedes-Benz S-Class

1 Answer

I just found that the passenger side rear window does not go back up. The motor runs. The window goes down but must be pulled up by hand. How do I remove the door panel to access the problem? 1990 300SEL

Posted by on

  • dougmeyer Jan 30, 2010

    That's what I thought, but unlike my old Ford truck did not want to dive into the panel removal without a few tips first. Do you know the process?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

Hi sounds to me like the window has come off its runner you will have to take the door panel off and clip it back into to position regards

Posted on Jan 30, 2010

  • geoff bonsall Jan 31, 2010

    not for that model of car but its not hard just look for the screws on the outside of the panel, and there is a screw either through the door handle or a clip on the back side of it. once the panel has come of it should just clip back in. regards geoff

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 Mitsubishi Galant rear window only goes down not up passenger side motor and regulator are fine replaced with new one replaced both switches getting power going up and down to motor hot wired the...


if you hot wired it straight to the motor and it works up and down fine chances are you have a broken or shorted wire between the button switch and the motor itself possibly between where the door opens and shuts at the hinge

Jan 02, 2015 | Cars & Trucks

1 Answer

Passenger Window stuck down


if its power window you may try this turn key on hold window button to up while at the same time with the side of your hand rap on the inside bottom and rear middle area of door panel if not your gonna have to pull door panel to inspect window motor

Sep 25, 2012 | 1996 Isuzu Rodeo

2 Answers

How do u know if its d regulator or motor that goes out on a window. If d rear passenger on a 03 Audi a 4


If you can raise and lower the window by hand, then it's the regulator. 9 times out of 10 it will be the regulator. I have a 2003 A4 and both rear window regulators are broken.

Apr 12, 2011 | 2003 Audi A4 Cabriolet

1 Answer

I have a 1994 Toyota Camry and the power window on the passenger side has gone down, under power. Then nothing would happen when I would pulled up on the switch on the driver side main switch and the also...


more than likely one of the switches are bad (down side of switch works but up side of switch dont) being as the switches are wired together if one goes bad other one won't work either take the switch out one of back doors should be same as front passenger door put rear switch in front passenger door if works then u know front door switch is bad if it doesn't then drivers door switch is bad
u replaced window regulator Did that come with motor too??? if not check to see if motor is good
there is two wires going to motor cut isolation back on wires and using some jumper wires attach one wire to positive terminal of a 12 volt battery attach other wire to negative terminal of battery window should move up or down reverse connections and window should move other way

Jan 29, 2011 | 1994 Toyota Camry

1 Answer

My passenger side,and rear power windows dont work and my lights dim when i try and let the passenger side window down the rear windows cause the car to do nothing. when i first bought the car the rear...


The motor on the passenger side is shorted and is now tripping the circuit breaker. Odds are, the back window motor is also bad. You have to take the panel off to check the motor. You can power it directly to verify it has failed.

Jul 22, 2017 | 1985 Pontiac Parisienne

1 Answer

1997 Jeep Cherokee Sport. Rear Passenger Window goes down not up


could be the switch one side not working test with meter

Oct 26, 2017 | 1997 Jeep Cherokee

1 Answer

Windows go down but won't come up


either the window seal is putting to much pressure on window, but most likely the window motors are wearing out.
This always happens when motors wear out. They will go down fairly easy, but don't like to go up because of the pressure of the seals on a weakening motor, they strive/struggle to move up

Jun 23, 2009 | 2000 Cadillac DeVille

1 Answer

I have a 97 camaro rs it has power windows and they are both messed up the drivers side motor is good but off track so i can pull up or push it down with one hand easy.the passengers side motor is dead or...


it is much easier to replace the motors then to deal with having them off the tracks and chancing breaking the windows when you go over a bump you can usually find the window motors on ebay for under $20

Apr 29, 2009 | 1997 Chevrolet Camaro

1 Answer

Passenger side power window wont roll up


The problem may be in the wiring which if you pull up the carpet on the front passenger side by removing the door floor trim and lifting the carpet you will see the wiring underneath. Probably laying in water or has been. Look for splices in the wiring which will have corroded. Repair the wiring then check the fuse.
Another problem may be in the motor found inside the door. The brushes may have worn out. If so you need to replace the motor. Ususally the drivers side will fail first since it is the most used.

Dec 21, 2008 | 2006 Chevrolet Cobalt

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...