Question about 1998 GMC Sierra

2 Answers

SHIFT IS UP AND DOWN BETWEEN 40 AND 50 MPH.98 gmc sierra 4x4

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,088 Answers

You may have a worn throttle position sensor that is erratic at those speeds. The engine computer may or may not pick up on this defect--take the truck to Autozone or similar business for a free computer scan. You need an oscilloscope to prove the part to be defective as it shows up on the scope as a series of noise pulses on what is normally a smooth rise and fall of voltage from the sensor. Hope this fixes your problem!

Posted on Jan 30, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 31 Answers

That is the torque converter lock up. they do that on those trucks the best thing to do is to shut off the over drive

Posted on Jan 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix automatic transmition in 2002 GMC ENVOY 4x4 shifts hard into third will not shift into overdrive already replaced the two solenoids in front before it would not shift to third


How To Rebuild A 4L60E Automatic Transmission - YouTube

? 13:19
https://www.youtube.com/watch?v=JpmJtuVrdWk
Mar 16, 2011 - Uploaded by Nick Stageberg
How To Rebuild A 4L60E Automatic Transmission ... Also here is a link to some common break/fixes that may require a rebuild:... GMC canyon, envoy, safari savana, sierra Sonoma, Yukon, ....Great video, my 96 sierra 4x4 when shifting into high gear motor races as if nothing is there........................always ...

30 Common 4L60E Transmission Problems & Repair ...

www.twincharlotte.com/transmission-repair.../30-Common-4L60E-Trans...
Mar 18, 2011 - The 4L60-E is an automatic shift, four-speed overdrive, longitudinally...... 4l60e 2002 gmc 4x4 was not driven for 1 year,will not shift into 3rd or ... I have a 2005 GMC envoy 4x4 6 Cylinder I assume it is a 460LE Transmission.

Nov 24, 2015 | GMC Cars & Trucks

1 Answer

My 1990 GMC Sierra 4x4 wont shift into overdrive the engine just revs up after second gear. All the other gears work fine.


check the wires on the overdrive solenoid on top of the gearbox .if ok change the overdrive relay.

Dec 21, 2013 | Cars & Trucks

1 Answer

2005 Sierra 4x4 doesn't work, 4h light is on and stays on


My 2005 Sierra 4x4 did the same thing while running down the interstate on vacation. Scared me to death, thought it was going to shift into 4 wheel drive @ 80 MPR. Had to take to shop and they found a censor bad and they replaced it. Don't know cost, because truck was still under warranty.

Nov 22, 2012 | 2005 GMC Sierra

2 Answers

Have a 98 GMC Sierra 4x4 5.7L Vortec 1500 and It will shift in 1st and 2nd but have nothing after that. I still have reverse an part as well. I hooked a reader up to the computer and it gave a code for a...


What's the code? On some gm vehicles once the check engine light is on, the computer puts the vehicle in safe mode and sometimes 3rd gear and overdrive will be disabled.

Dec 16, 2017 | 1998 GMC Sierra

1 Answer

1998 gmc 1500 will not engage front wheels manual


check and adjust if necessary 4x4 shift linkage

Oct 29, 2009 | 1999 GMC Sierra

1 Answer

4x4 still not working


you could have problems in the shift control module.or faulty switch in dash.

Jun 04, 2009 | 1999 GMC Sierra

2 Answers

95 GMC Sierra 4L60E will not shift down to 1st or up to 4th.


no power stuck in 3rd gear electric shop unless youve burnt it up good luck...www.TransmissionGarage.com

Jan 28, 2009 | 1995 GMC Sierra

1 Answer

2008 GMC 1500 Sierra 4x4 locks up


HE IS WRONG!! But only use 4x4 when absolutely needed.. and stop to shift ..both in and out of 4X4.. ..

... have the rear end fluid changed ASAP...

Sep 12, 2017 | 2006 GMC Sierra

2 Answers

1998 GMC Sierra Signal Fuse Blowing


it seems you have a short in either one of the lights or interlock. all are connected to the same fuse. trace the wiring from the fuse box back to the component. Using a test light test in between the wires. check for any obvious breaks in the wiring.

Dec 06, 2008 | 1991 GMC Sierra

1 Answer

My 1994 GMC Sierra's transmission doesn't shift into overdrive every time


hello: i have a 1994 GMC SIerra 1/2 ton 2 wd, the first two gears shift find but when you get up to about 55 or 60 mph, the transmission wont shift.

Jul 26, 2008 | GMC Sierra Cars & Trucks

Not finding what you are looking for?
1998 GMC Sierra Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

79024 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...