Question about 2003 Jeep Grand Cherokee

1 Answer

Location of crankshaft sencer 4.7 jeep

Location of crankshaft sencer 4.7 2003 jeep

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,741 Answers

Crank sensor is located on the bell housing of the transmission where it bolts to the engine.

The Camshaft Position Sensor (CMP) on the 4.7L is bolted to the front/top of the right cylinder head.
It is easier to remove/install sensor from under vehicle.

  1. Raise and support vehicle.
  2. Disconnect electrical connector at CMP sensor.
  3. Remove sensor mounting bolt.
  4. Carefully twist sensor from cylinder head . Some 4.7L engines are equipped with a sensor spacer shim. If equipped, this shim will be located at sensor bolt hole between cylinder head and sensor mounting tang (TSB W08-18-00). Save this shim for sensor installation.

Location of crankshaft sencer 4.7 jeep - fd4cd43.gif

This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Posted on Jan 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing crankshaft position sencer on 2011 dodge cummings 6.7


Here's a link to a YouTube video showing location. The video is for a 5.9L, but it's the same for the 6.7L.
How to Change the Camshaft Position Sensor on Dodge Cummins 5 9 liter P0341

Nov 26, 2016 | Dodge Cars & Trucks

1 Answer

I HAVE TO CHANGE OUT A CRANK SENSOR IN MY GRAND CHEROKEE.


Jeep Crank Sensor Replacement, P Codes P0351, P1391 ...

? 6:24
www.youtube.com/watch?v=7D0vUEDSwXo
May 12, 2013 - Uploaded by Robert DIY Replaced the crank sensor on this 2003 Jeep Grand Cherokee.... to replace my crankshaft position sensor on my 1998 grand cherokee laredo.

Jeep Crankshaft Position Sensor Replacement (CKP, CKPS ...

? 4:07
www.youtube.com/watch?v=1Ho5iAKQV00

Oct 27, 2013 - Uploaded by WeekendHandymen
hi , do you think if I replace crank sensor will solve the problem ,my jeep .... Where's the crankshaft located in 99 jeep grand Cherokee laredo .


Oct 24, 2015 | Cars & Trucks

1 Answer

2001 jeep wrangler 4.0 liter where is crankshaft sencer located


Near the harmonic balancer I believe. .. at the front of the motor

Aug 09, 2014 | Cars & Trucks

1 Answer

2000 jeep 4L crankshaft sensor location


old post
FSM shows
top left bell
at 10am looking front direction from left of trans.
its really a flywheel sensors. (crank) there are 4 possible on all engines with one. 2 rear, 1 center and at front pulley.
rare exceptions and odd.

Jun 29, 2014 | 2003 Jeep Grand Cherokee

1 Answer

CRANKSHAFT SENCER LOCATION


usually behind crankshaft pulley on the bottom engine .. complicated job check around for best price try independent shops first

Apr 26, 2014 | 1998 Pontiac Sunfire

1 Answer

2003 sts A&B crankshaft sensors location


ABOVE OIL FILTER HOUSING BEHIND MOTOR MOUNT BRACKET

Dec 22, 2013 | 2003 Cadillac Sts

1 Answer

2003 crankshaft position sensor location


Rear of engine in the bell housing over the stater.

Oct 10, 2012 | 2002 Jeep Grand Cherokee

2 Answers

Picture/location of crankshaft position sensor 2003 nissan exterra


The location is in back of the engine on the top of the transmission3_17_2012_9_03_53_pm.jpg

Mar 17, 2012 | 2003 Nissan Xterra

1 Answer

WHERE IS THE CRANK SHAFT SENCER LOCATED ON THE MOTOR


The 2 crankshaft sensors are located on the front of the engine block, between cylinder Numbers 4 and 6. Crankshaft position A sensor is located on the upper crankcase and crankshaft position B sensor is located in the lower crankcase. Both sensors extend into the crankcase and are sealed into the engine block with O-rings. The crankshaft position sensors are not adjustable.

Jun 08, 2010 | 1998 Cadillac Catera

2 Answers

Cam position sensor location find the location on engine


Mounted on the backside of the cylinder head.

Feb 03, 2010 | 2004 Dodge Neon

Not finding what you are looking for?
2003 Jeep Grand Cherokee Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...