Question about 2001 Honda CR-V

1 Answer

Central locking only working on drivers door.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

Hi!
Please open the inner door panell of the passenger side and check the wiring.... 90% of the reason is that either the wire has slipped off the central locking machinasm which yould have to simply push in back to place or if there is corrosion then you could clean the same by spraying some anti corrosion like WD40.
This should solve your problem.
Regards
Berry

Posted on Jan 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan almera 2.2 central locking not working. I can only open drivers door with key Ive just re charged my battery.


I had that problem the other day
Battery dead charged it fitted it started car central locking for other doors only let go after I drove the car down the road
So it might work for you as well

Jan 08, 2016 | Nissan Cars & Trucks

1 Answer

My right side passenger door does not lock automatically anymore. Is there a fuse that operates this.


no all is related to one fuse you can remove the door internal controls and decore and remove center lock motor plug and test two connectors with multimeter with set on 12v and then lock un lock door and check the reading of the multimeter if it read signal then all plugs and wires from central lock control unit to the door central lock unit is okay it this cae you have to replace the door central lock unit with the same if no signal is readed while you lock unlock the door then you have to check central control unit and all wire plus out of it to the door plug

2- you can remove central control unit from driver door and test it in passenger door (usually the same unit ) if it works with lock unlock its then the replaced unit is faulty and needs to be replaced if it not work then check plugs wires from central lock unit (usually found inside driver door ) to the central lock unit in passenger door

3- check signal for said door fro the output of central door unit if no signal then it mean that faulty central lock control unit

Feb 23, 2015 | 2005 Honda Accord

1 Answer

Central locking not locking all locks from drivers door, will unlock, but not lock. working fine on passenger door with key, locks all. switch to activate central locking on drivers door unlocks but doesnt...


You will need to replace the driver door switch. You can try to pick a switch up from the dealer or a local car wrecker (i.e. Pick-n-Pull). It will involve learning to take apart the door trim panel.

Sep 05, 2011 | 1993 Toyota Corolla

1 Answer

My 1995 toyota lexen central locking works on all doors except the Driver door any ideas on where i might start looking is a full central lock replacement or just a fuse???


Mine is the opposite... driver's door works, all others are locked and can't be opened, even from inside. Suspect may be something to do with central locking...maybe needs re-booting somehow??

Dec 07, 2010 | Toyota Passenger Cars & Trucks

2 Answers

My central locking is not working properly


it is more than likely the drivers door latch assembly

Jul 21, 2009 | 1999 Audi A4

1 Answer

Central locking locks but does not unlock


then the central locking is working, if it wasn't no door would lock, replace the driver door lock actuator motor.

Jun 28, 2009 | 1991 Ford Escort

1 Answer

1999 Audi A3 1.8T Electric Windows and Central Locking Won't work


will your passenger door open with the key and is it just one side that your windows are not working or both. if its just one side it might be your regulator motor in the door thats not working if its both it might be your central locking pump usually in the boot. however if both of them are working fine it could be that your key needs reprogrammed however i think the 1st 2 are more likely to be the problem.

Jun 24, 2009 | 2002 Audi A4

1 Answer

Driver door central locking


More than likely your front driver door module has failed.  You will need to replace this module and readapt the key fobs for locking and unlocking

May 29, 2009 | 2002 Audi A6

Not finding what you are looking for?
2001 Honda CR-V Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...