Question about 2000 Ford Focus

Open Question

How to remove front bumper ford focus 1999 - 2000 Ford Focus

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 840 Answers

SOURCE: Trouble removing 1999 Solara Grille

sorry to tell you that but you must take the bumper off and its pretty easy there are retainers up top remove them remove the bottom of the bumper ones and they may have bolts now for the last part its 100 mm at the fender edge and bumper just slide off and then you can take and change the grille

Posted on Jan 27, 2009

Ad
  • 1596 Answers

SOURCE: replacing front bumper on 1999 buick regal

7/16th or 10mm Sheetmetal nuts All over Behind the Bumper Thak Bumper off first

Posted on Jan 16, 2009

  • 5 Answers

SOURCE: ford focus 1999

Pin --- Color --- Stripe --- Function

Harness 1

1 --- White --- Black --- Left front +
2 --- Gray --- Black --- Left front -
3 --- White --- Purple --- Left rear +
4 --- Gray --- White --- Left rear -
5 --- White --- Red --- Right front +
6 --- Gray --- Red --- Right front -
7 --- White --- (none) --- Right rear +
8 --- Gray --- (none) --- Right rear -

Harness 2

1 --- (not used)
2 --- Black --- Green --- Radio Ground
3 --- (not used)
4 --- Orange (thin) --- Black --- Radio Illumination
5 --- Green --- Yellow --- Radio switch
6 --- Black --- Yellow --- Radio Ground
7 --- Orange (thick) --- Black --- Radio 12V

Harness 3

1 --- White --- Green --- Speed sensor
2 --- (not used)
3 --- (not used)
4 --- (not used)
5 --- (not used)
6 --- (not used)

Posted on Feb 25, 2009

moparownr
  • 667 Answers

SOURCE: how to replace the front bumper and grill on a 97 ford explorer

you need a repair manual, Haynes or Chilton, there are too many places to explain here in this format, if you can not find these book at your local parts store, then try your local library, then sometimes even have the dealer shop manuals for your use, hope this helps

Posted on May 20, 2009

  • 1986 Answers

SOURCE: I want to fit a towbar to my ford focus hatch 2008

Pop the Hatchback open and remove the connectors
from the top of the bumper cover.

Optional Step: Using a Floor Jack, raise both sides
of the car in the back, supporting both sides with
jack stands, and remove the rear wheels.

Using Torx Bits, remove the inner rear wheel well
lining.

Get behind the rear wheel well and loosen the bolts
holding the bumper brackets on. They're pretty
difficult to find and remove. Be Patient. Do the
same to the other side.

Remove the rear bumper cover by pulling the cover
outward from the part nearest the wheel on both
sides. Once removed, take off the 2 black mounting
brackets from the bumper cover.

Posted on Oct 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fill r22 ac on 2004 Ford focus


To top up AC then the low pressure connection is under the front wing right side at the front directly behind the bumper ,remove the plastic inner wing at the front to gain access

Jul 31, 2015 | Ford Cars & Trucks

1 Answer

Reolace front bumper 2001 ford focus ghia


raise and support front of vehicle, remove radiator grill, remove the headlamps, disconnect the wiring from the indicators and fog lamps.
undo the screws holding wheel arch liner to front wings (1 each side) and the screws (3 each side) securing the bumper to the wings.Release the 6 securing clips from the top of the bumper cover and the 3 from the bottom. with someone helping, pull out the sides of the bumper and slide forward. Fitting is in reverse order

Mar 14, 2015 | 2001 Ford Focus

1 Answer

Where can I find instructions on removing a front bumper on a 2001 ford focus


There are 4 bolts (upper) that fixes the bumper, under the bumper, there are bumper sliders as well as the sides. Remove the 4 bolts, fender linings and slide off bumper clips from the sliders

Jan 27, 2015 | 2001 Ford Focus

1 Answer

What is the location of the horn on a 2008 ford focus


the horn is on the lower passenger side on he chassis sub-frame in between bumper and front quarter panel

May 15, 2014 | 2008 Ford Focus

1 Answer

Remove fog light assembly/1999 ford explorer sport


You need to remove the front bumper cover.

Aug 22, 2012 | 1999 Ford Explorer

2 Answers

Where is the condenser core located on a 2001 ford focus


condensors are fitted in front of the radiator

Jun 26, 2011 | 2001 Ford Focus

1 Answer

Front Bumper


Get under the car and look up under and on each side thoroughly and you will see the bolts necessary to tak it off. It is quite simple and need very few tools It is just a vinyl cover.

May 10, 2010 | 2002 Ford SVT Focus

1 Answer

Ford focus 56year key wont open bonnet stripped out grill the lock cable and plastic connection to the bonnet catch is there in front of me but i dont know how to disconnect the plastic connection or...


I also have the same problem with a 2007 ford focus. I have been informed that it is a common problem and that the barrel needs to be changed. I believe it is necessary to open the bonnet by trying to remove the panel/ covers from under the front bumper. I managed to get the panel off by removing about 8 screws but I was still unable to open the bonnet.
If you have any luck, would you please respond.

Jan 01, 2010 | 2006 Ford Focus

1 Answer

I want to fit a towbar to my ford focus hatch 2008 model. What is involved in removing rear bumper Regards Brian Lamb


Pop the Hatchback open and remove the connectors
from the top of the bumper cover.

Optional Step: Using a Floor Jack, raise both sides
of the car in the back, supporting both sides with
jack stands, and remove the rear wheels.

Using Torx Bits, remove the inner rear wheel well
lining.

Get behind the rear wheel well and loosen the bolts
holding the bumper brackets on. They're pretty
difficult to find and remove. Be Patient. Do the
same to the other side.

Remove the rear bumper cover by pulling the cover
outward from the part nearest the wheel on both
sides. Once removed, take off the 2 black mounting
brackets from the bumper cover.

Oct 27, 2009 | 2007 Ford Focus (3 Door) Hatchback

1 Answer

Uninstalling a front bumper


Just pull the plastic plugs off in the wheel well but make sure you have a buddy with you so you can remove it at the same time. You on one side and the friend on the other, Its a real easy job!

Oct 26, 2008 | 1999 Ford Crown Victoria

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

764 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...