Question about 1996 Ford F150 Regular Cab

1 Answer

Blows cold air as if ac is on took cover off the heater core and have heat to the floor

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

There is a temperature door not working,it is a actuator motor that controls this,it should be,on top of the blower box,in the center of the vehicle,the dash may have to be pulled out toward the seats to access the actuator motor.

Posted on Jan 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How come i dont get no heat?


The heater core may be plugged with rust. Good way to test it is with the engine warmed up put the controls in heat mode and then go under the hood and locate both water hoses going t the heater core. Hold on to both hoses to see if the temperature of both hoses are the same. If not, no water is getting into the core. . If the temp is the same, then control vacuum is not working. There is a check valve in the line to the control head that prevents vacuum fluctuations from moving the blend door when accelerating. Check it.

Sep 25, 2016 | 2001 Chevrolet S-10

1 Answer

Only blows heat when accelerating


the ac core only blows cold air but You must be talking about the heater core.. In which case I would suggest that you bleed the air out of the coolant system as there is an air lock in the heater core.

Jan 07, 2014 | 2009 Ford Focus

1 Answer

I have a 1999 Caddac DeVille . The AC works fine during the summer but in the winter it won't blow out hot air unless I'm driving. I've let the car run in the morning to warm up but the inside...


your heater core is possibly stopped up if there has been a radiator leak and stop leak has been poured its definetly clogged or could be a faulty thermostat

Jan 07, 2013 | Cars & Trucks

1 Answer

My heater does not blow in floor in a dodgeram 1500


the heater vacuum motor and lines needs to be checked.Also get the blend door checked.

NO HEAT ON FLOOR VENTS

---------

As per your problem mentioned. There are few solved help links to troubleshoot these problems. Go through the list and Click the link below:----

2000 Toyota Avalon: No heat on Passenger Side?

http://whatisbyme.blogspot.in/2012/05/2000-toyota-avalon-no-heat-on-passenger.html


------------

No heat on Oldsmobile Silhouette?


http://technoanswers.blogspot.in/2012/02/no-heat-on-oldsmobile-silhouette.html

------------

Heater blows cold?

http://schematicsdiagram.blogspot.in/2012/02/heater-blows-cold.html

-----------

Heat blows cold on drivers side and hot on passenger side?

http://schematicsdiagram.blogspot.com/2011/12/heat-blows-cold-on-drivers-side-and-hot.html

----------

Hot air on the driver's side vents only?

http://repairhelpcenter.blogspot.com/2012/01/hot-air-on-drivers-side-vents-only.html

--------------

Temperature gauge does not move and no heat when heater is ON?

http://technoanswers.blogspot.com/2012/01/temperature-gauge-does-not-move-and-no.html

-----------

1992 Toyota Camry: A/C Control light Flashing and A/C not Blowing Cold?

http://technoanswers.blogspot.in/2012/04/1992-toyota-camry-ac-control-light.html

--------------

No heat, blower blows only cold?

http://technoanswers.blogspot.in/2012/02/no-heatblower-blows-only-cold.html

----------

Ford F150 Ac only blows through defrost vents?

http://technoanswers.blogspot.com/2012/01/forf-f150-ac-only-blows-through-defrost.html

----------

Dodge A/C come out of defrost vents only?

http://technoanswers.blogspot.com/2012/01/dodge-ac-come-out-of-defrost-vents-only.html

---------

Ac vacuum line on dodge cummins?

http://technoanswers.blogspot.com/2012/01/ac-vacuum-line-on-dodge-cummins.html

---------

Ford ranger AC blows cold through defrost vents instead on cabin vents?

http://technoanswers.blogspot.com/2012/01/ford-ranger-ac-blows-cold-through.html

----------

2005 Chrysler PT Cruiser: A/C Blows Warm?

http://whoisbyme.blogspot.in/2012/06/2005-chrysler-p8t-cruiser-ac-blows-warm.html

-------------

2009 Mercury Grand Marquis: A/C blows Cold From Defrost Vent Only?

http://whoisbyme.blogspot.in/2012/06/2009-mercury-grand-marquis-ac-blows.html

-----------

AC not blowing through Vents on 2007 Chevy Trailblazer?

http://schematicsdiagram.blogspot.in/2012/04/ac-not-blowing-through-vents-on-2007.html

----------

Passenger side temperature is warm air out of dash vents?

http://schematicsdiagram.blogspot.in/2012/04/passenger-side-temperature-is-warm-air.html

----------


These will help.

Thanks.

Nov 28, 2012 | Cars & Trucks

2 Answers

What's your problem?I have a 1996 Chevrolet Suburban. The AC is blowing out hot air. I have had the truck for 6 years, every Summer its the same thing. The ac does not get cold, I take it to the m


To clarify - - if the truck has rear and heat, you have two heater cores and two evaporator cores. The evap cores carry the freon.
If the leak is in the evap core in the front, the price is probably right.

Jul 06, 2012 | 1999 Chevrolet Suburban

2 Answers

1996 grand am 3.1 wet floor on drivers side?


Either your AC drain is clogged or the heater core is failing. Does your heat work well and blow hot air? If so, it's likely a clogged AC drain (although a bad heater core could be the issue). If it does not, your heater core is shot (replacement involves removal of the dashboard).

Nov 18, 2009 | 1996 Pontiac Grand Am

1 Answer

REPLACING HEATER CORE


HEATER CORE REPLACEMENT REMOVAL PROCEDURE 1. Remove the fuel injector sight shield. 2. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System. 3. Use J 38185 in order to position aside the heater hose inlet and outlet clamps at the heater core. 4. Disconnect the inlet and outlet heater hose from the heater core. 5. Remove the RH Instrument Panel Closeout/Insulator panel. 6. Remove the LH Instrument Panel Closeout/Insulator panel 7. Remove the floor carpet. 8. Remove the rear floor air outlet duct from the holes in the floor reinforcement. 9. Disconnect the rear floor air outlet duct from the heater air outlet cover. 10. Remove the rear floor air outlet duct. 11. Remove the heater air outlet cover screws . 12. Remove the heater air outlet cover heat stakes with a small chisel. 13. Remove the heater air outlet cover from the HVAC module assembly. 14. Remove the heater core cover screws . 15. Remove the heater core cover heat stakes with a small chisel. 16. Remove the heater core cover from the HVAC module assembly. 17. Remove the heater core from the HVAC module assembly. 18. Remove the heater core foam seal (1) from the HVAC module assembly.
INSTALLATION PROCEDURE 1. Install a new heater core foam seal to the HVAC module assembly. 2. Install the heater core to the HVAC module assembly. 3. From the inside of the heater core cover, drill the dimples adjacent to the heat stakes using a 5.5 mm (7/32 in) drill bit. 4. Install the heater core cover to the HVAC module assembly. NOTE: Refer to Fastener Notice in Service Precautions. 5. Install the heater core cover screws . Tighten Tighten all screws to 1.5 N.m (13 lb in) . 6. From the inside of the heater air outlet cover, drill the dimples adjacent to the heat stakes using a 5.5 mm (7/32 in) drill bit. 7. Install the heater air outlet cover. 8. Install the heater air outlet cover screws (2). Tighten Tighten the screws to 1.5 N.m (13 lb in) . 9. Connect the rear floor air outlet duct to the heater air outlet cover. 10. Install the rear floor air outlet duct to the holes in the floor reinforcement. 11. Install the floor carpet. 12. Install the RH Instrument Panel Closeout/Insulator panel. 13. Install the LH Instrument Panel Closeout/Insulator panel. 14. Connect the inlet and outlet heater hose to the heater core. 15. Use J 38185 in order to reposition the heater hose inlet and outlet clamps to the heater core. 16. Install the fuel injector sight shield. 17. Fill the cooling system.

Nov 13, 2009 | 2003 Chevrolet Monte Carlo

1 Answer

Replacing heater core on 2004 monte carlo


REMOVAL PROCEDURE 1. Remove the fuel injector sight shield. 2. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System. 3. Use J 38185 in order to position aside the heater hose inlet and outlet clamps at the heater core. 4. Disconnect the inlet and outlet heater hose from the heater core. 5. Remove the RH Instrument Panel Closeout/Insulator panel. 6. Remove the LH Instrument Panel Closeout/Insulator panel 7. Remove the floor carpet. 8. Remove the rear floor air outlet duct from the holes in the floor reinforcement. 9. Disconnect the rear floor air outlet duct from the heater air outlet cover. 10. Remove the rear floor air outlet duct. 11. Remove the heater air outlet cover screws (2). 12. Remove the heater air outlet cover heat stakes (1) with a small chisel. 13. Remove the heater air outlet cover from the HVAC module assembly. 14. Remove the heater core cover screws (2). 15. Remove the heater core cover heat stakes (1) with a small chisel. 16. Remove the heater core cover from the HVAC module assembly. 17. Remove the heater core from the HVAC module assembly. 18. Remove the heater core foam seal (1) from the HVAC module assembly

Nov 08, 2009 | 2004 Chevrolet Monte Carlo

1 Answer

AC blowing heat and air at same time


Yeah Ron, the flap that covers the heater core is open and when you're moving the air is pushed over the heater core and into the cab your in. Possibly just a vacuum line of that controls said flap. Check all vacuum lines for good proper connection to these flaps because all of them are vacuum actuated.

May 03, 2017 | 1993 Lexus Ls 400

1 Answer

2004 Pontiac Montana blows cold air in defrost


There is a mix damper inside your duct that controls the heat over heater core and ac evaporator that to your floor and one to your defrost. it is probable an electric actuator, that is not functioning properly. If yu can locate it and manually move it, you might have to remove the actuator motor first, you should be able to figure out your problem, I hope this helps! merry Christmas!

Dec 22, 2008 | 2004 Pontiac Montana

Not finding what you are looking for?
1996 Ford F150 Regular Cab Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...