Question about 2003 Volkswagen Passat

1 Answer

2004 passat highline tdi, alarm keeps going off for no reason and cant deactivate it by pressing the lock button twice like it says to in the manual,, where is the fuse?????

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

You could have a problem if you remove the fuse .It is located on the drivers side dashboard. The alarm most likly means you need a drivers side door lock actuator. The convenience computer controls many accessory's. If the alarm keeeps going off try to turn it off by turning the trunk lock to off.It is easy to find the problem with the proper factory scan tool. It will show a code and with the code you can fix the problem www.GermanCarDepot.com

Posted on Feb 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i get stick on glass mirror for 2004 passat highline tdi 100


Yes. you can get an after market standard fits all type one for it.

Hopes this helps Mike

May 23, 2015 | 2004 Volkswagen Passat

Tip

VW PASSAT ALARM RESET.


TO RESET A PASSAT ALARM/IMMOBILISER,with the key unlock and hold over the key in the drivers door,the windows will go down,wait 30 secs, then lock and hold key over,windows will go up,wait 30 secs,then press/hold down the unlock button on the remote for 30 secs.the system is now reset.works when battery disconnected for whatever reason or goes flat .

on Nov 17, 2010 | Volkswagen Passat Cars & Trucks

1 Answer

How do I turn my alarm on the saturn vue


If you have a factory installed alarm the original factory key can activate the alarm by pressing the lock button twice(rapidly). The lock symbol is generally a symbol of a "locked" lock.
If there is no buttons on the car key or it is an aftermarket alarm, a key fab (a little alarm remote control with 2-4 buttons the size of a keychain) is needed to activate/deactivate the alarm.

May 09, 2012 | 2007 Saturn VUE Green Line

1 Answer

Just bought a 2004 hyundai Santa Fe. Trying to learn how to set the alarm. Can someone help me please?


PRESS THE REMOTE TRANSMITTER UNLOCK BUTTON ONE TIME DEACTIVATES ALARM AND UNLOCKS THE DRIVERS DOOR ONLY. PRESSING THE REMOTE TRANSMITTER TWICE DEACTIVATES ALARM AND UNLOCKS ALL DOORS.

Feb 01, 2011 | 2004 Hyundai Santa Fe

2 Answers

Hyundai santa fe key fob 1 works 1 does not have changed battery deal says to buy new ,can i unlock with key without alarm going off


System operation
Pressing remote control lock button locks vehicle and activates system Fig. 1 . Indicators flash once. Pressing remote control unlock button unlocks vehicle and deactivates system Fig. 1 . Indicators flash twice.
Fig. 1
Synchronization
When
System malfunction. Remote control added or replaced.
How
Access alarm system control module located under driver's side lower fascia Fig. 2 . Set memory switch to SET position. Press remote control lock or unlock button. Set memory switch to OFF position. Confirm synchronization has been successful by locking and unlocking vehicle. Repeat procedure for second remote control. Synchronization can also be carried out using diagnostic equipment.
NOTE: A maximum of 2 remote controls can be programmed. NOTE: If remote control fails, system can be deactivated as detailed in the owner's handbook.

Jul 30, 2010 | 2003 Hyundai Santa Fe

1 Answer

2004 Passat TDI won't start


using the key,lock car/hold key over for 30 secs,then press/hold unlock button for 30 secs,that resets the alarm/immobiliser.OR does the pre heater coil light up orange then go out so that you can start car,or are you trying to start the car too soon or waiting too long after the light goes out.also try spare key,sometimes key looses code...as the pre heater is operated by opening the drivers door any delay...
have you tried wynns/redexe diesel treatment,could be dirty injectors.....
after trying all the above and you have no joy, come back to me, ta!

Apr 18, 2010 | 2004 Volkswagen Passat

1 Answer

I replaced battery in my audi 80 2.0 tdi but have lost the remote and alarm wont stop going off .


Depress lock or unlock button. Manually lock and unlock driver's door within 30 seconds. System should now lock or unlock vehicle. If not, carry out programming procedure.
Programming
When
Key added or replaced. System malfunction: Alarm LED in rear fog lamp switch illuminates for 30 seconds when vehicle is locked.
How
NOTE: A maximum of 4 keys can be programmed (one at a time).
As memory positions of existing keys are unlikely to be known: Obtain and reprogram all keys.
NOTE: Existing key memory positions will be overwritten.
Switch ignition ON. Use key not fitted with remote control. Manually lock vehicle using key. Using first key, press unlock button once (programs memory position 1). Alarm horn sounds once to indicate signal received. Wait 6 seconds. Press unlock button once to confirm programming. Vehicle unlocks. Programming mode deactivated. Switch ignition OFF. To program remaining keys into memory positions 2, 3 and 4. Carry out the complete procedure below for each key: Switch ignition ON. Use key not fitted with remote control. Manually lock vehicle using key. Press unlock button at 1 second intervals, as follows: Twice for memory position 2 (second key). Three times for memory position 3 (third key). Four times for memory position 4 (fourth key). Alarm horn sounds once every time unlock button is pressed, to indicate signal received. Wait 6 seconds. Press unlock button once to confirm programming. Vehicle unlocks. Programming mode deactivated. Switch ignition OFF.
NOTE: Ignition MUST be switched OFF between each key programming procedure

Jan 10, 2010 | 1992 Audi 80

1 Answer

Honda Odyssey 2004 no alarms


There is most likely a reset button under the dash somewhere. You can try pressing and holding that button down while pressing the lock button on the remote. If this does not work simply have the dealer reset it for you.

Jan 06, 2010 | 2004 Honda Odyssey

1 Answer

Motor car electrical fault


you are right they are connected check the rear catch for any broken wires but normally the micro switch breaks and sets the alarm off

Feb 05, 2009 | 2004 Volkswagen Passat

1 Answer

CAR WON'T START/CAR ALARM


unlock driver door twice consecutively to deactivate the alarm.

Nov 12, 2008 | 1993 Volkswagen Passat

Not finding what you are looking for?
2003 Volkswagen Passat Logo

592 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...