Question about Toyota Camry

Open Question

I have a 2005 Toyota Camry with the right low beam headlight out. The bulb is good. We tested that fuse position in the fuse box and it has no voltage. Fuse position for opposite headlight has voltage.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: low beam headlights on 2004

You may have replaced the high beam by mistake. The low beam is closer to the exterior (the sides of the car)
Paul G Schmidt
Paulgms@juno.com

Posted on Oct 27, 2008

michigan man
  • 3533 Answers

SOURCE: Have High beams, but right low beam doesn't work

yes you are right it is the blub that need to be relace

Posted on Feb 01, 2009

messstat
  • 365 Answers

SOURCE: High beam works, headlight doesn't, fuse & bulb are ok

replace the bulb AGAIN...most likely bulb was bad from the get go.

Posted on Jun 14, 2009

  • 347 Answers

SOURCE: change headlight bulb in Toyota Camry 2004

there is a bulb housing behind the lens. remove it and the bulb.

Posted on Sep 18, 2009

roniecon
  • 6826 Answers

SOURCE: left front low beam headlight not getting any

I don`t know the year ,but the newer models have separate head light relays.There is one for the left,and one for the right.The relays are in with the relay bos,maybe under the hood,the relay would be the only reason,except for wire harness problem.

Posted on Sep 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I started my 05 Toyota Camry one night two weeks ago, for the first time my high beams would not go on, what could be the issue, and how can I fix it?


1. Check the fuses for the high beam circuit. There is usually one fuse for the left and one for the right high beam.

2. If the fuses are OK, check the Relay (also normally found in the Fuse and Relay boxes ) for the high beam circuit.
There is normally one Relay for the Low Beam circuit and one Relay for the High beam circuit.

3. If the fuses and relays check out OK, there may be a problem with the high beam switch on your headlight controls.

Dec 27, 2015 | 2005 Toyota Camry LE

1 Answer

He headlight for toyota camry 2009 from malaysia cannot get to high beam. low beam is ok. fuses relays and bulbs as well as the switch is ok.


Is the bulb ok sometimes you hit a bump real good and pops
the bulb check owner at bulb socket no power relay headlight
in enginecompartment

Jun 23, 2015 | Toyota Cars & Trucks

2 Answers

Head light not working on high beams


Poss wrong bulb, reversed wiring or bad connection when installed short to headlight switch. Check the bulb first. & fuses

Jul 11, 2014 | 1996 Toyota Camry

1 Answer

Toyota camry 2002 fuse box diagram


It is very common for both headlights to be bad, as we use our low beams a lot more than high beams. I would first suggest replacing the headlight bulb. The low beam filaments could be bad and the high beams be ok. If this doesn't help feel free to let me know and I will be happy to look a little deeper for you.

Sep 12, 2013 | Cars & Trucks

1 Answer

Cmary 2005 low beam light


Are you getting power and ground to the bulb ?

Jun 30, 2013 | 2005 Toyota Camry XLE

3 Answers

Daytime Running Lights Inoperative 2002 Toyota Camry


[Information] For a 2002 Toyota Camry, the Daytime Running Lights (DRL) operate utilizing the High Beams (inner Lamps closer to the center of the vehicle front) at a reduced power.

[The troubleshooting process:] Review the Owner's Manual and ensure the test configuration matches the following criteria:
1. According to the 2002 Toyota Camry Owner's Manual (Check your Owners Manual):
"The DRL system will make your headlights come on at a reduced brightness when:
The light switch s in the "DRL" position.
The ignition is on with the engine running.
The headlight switch is off.
The parking brake is released."


2. Set the Test Conditions according to Step 1 above.

3. Check the headlight bulbs to ensure they are not burned out. If one burns out, there is a fair chance that the other would have burned out at the same time. Replace as necessary. In this case, if the high beams operate, the DRLs should also operate.
4. Test the system, ensuring the step 1 conditions are set. (Engine running, Multi-function Switch on Turn Signals in "DRL" position, headlight switch off (repeating what the manual says -- it should be obvious that in the "DRL" position, the headlight switch should be off / do not have the switch positioned to "High Beam"), and the Parking Brake "off").
5. If DRL lights do not work, check the engine compartment Fuse and Relay Box. there is a 5 Amp DRL fuse -- replace it with the spare. Test (step 4).
6. If it does not work, swap around or replace relays -- there are three (3). Any one of them could be bad (stuck or burned out). Test (step 4).
7. Other less likely possible issues could be that the Multi-function Switch is broken or a connection / wire is broken. [Beyond the scope of this process.]


My problem was that the test configuration did not have the engine running and parking brake off - Step 1. Problem solved with much thought, repetitive tests on the vehicle and going back to the basics -- what does the Owner's Manual say and where are the applicable fuses and relays located?

Dec 30, 2011 | 2002 Toyota Camry

2 Answers

Hi: I have a 01 Camry with low milage the right high beam lamp has no power to the bulb. The harness is like new and all the under hood fuses seem in good condition. I first thought the problem was ths...


If you have daytime running lights, you're going to have to check all the relays. There are also 4 fuses for this design. 2 20 amp for high beams and 2 10 amp for low beams.
The non-DRL version is simpler, but it isn't clear to me that is what you have. That design runs both the high and low beams off 2 20 amp fuses. If you missed the one for the right bulb, maybe that's all you need to fix--it also runs the high beam indicator. This stuff may be in the cabin fuse box. If not, check the one in the engine compartment. I will paste the diagrams below, but the res may not be good.

82c2dd9.gif009b523.gif

Sep 29, 2010 | 2002 Toyota Camry

1 Answer

Headlight 2004 camry


your module in the steering wheel is faulty you should get it replaced. you can purchase it at ie Napa for alot less than through a dealer.

Sep 01, 2008 | 2007 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...