Question about Toyota Corolla

1 Answer

How to install a door handle driver side for a 2000 Toyota Camry, are the bolts of the handle metric? ,and do I have to remove the entire panel to get to it??

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Toyota Master
  • 2,007 Answers

Yes the bolts are metric, and yes, you will have to remove the inner door panel.

Posted on Jan 30, 2010

Testimonial: "Thank you for your help, it answered my question."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I repair the exterior door handle on a 1999 Toyota Camry ? Will it be necessary to replace the entire door ?


No the door handle is easily replaceable. you do have to remove the door panel and roll the window all the way up. 2 10mm nuts inside the door cavity and one bolt on the door jam near the lock mechanism. These handles are made of plastic and degrade and break easily after 3 or 4 years. Every toyota owner has to deal with this at some point. I also recommend buying the new handles on ebay as opposed to the dealer. The aftermarket handles are better quality than the original and MUCH cheaper. They are ALWAYS available on ebay.

Aug 02, 2012 | 1999 Toyota Camry

1 Answer

Install motor/regulator to 2000 camry solara


It easy ! You need a philips2_bing.gif and flat screw driver,8" X 4" block of wood and a needle nose pliar.
Use flat screw driver and pry out the two or three dust covers for the arm rest screws then use philips and remove the screws. Next use the flat screw driver and pry out the black plastic mirror cover from the inside of the door. Pry out the switch panel ( aka master switch panel) with the flat screw driver and disconnect it. On the side of the door panel just above the striker is this plastic push pull typeof a hold in screw. Use flat screw driver to get it to move a little then pull it out with the needle nose. Depending on which door your doing if you have a map folder ( driver or front passenger door) in the door there are two more screw to remove on the bottom of the door.
Now the inside door handle is tricky it comes out in two pieces. Use philips and get the only hold down screw you see out.( you may have to pry out al ittle screw cover first) Now the handle cover is removed by placeing the flat screw driver on the rear of the outside of the cover top and on the outside rear bottom to release the tangs that are holding it onto the panel.Pry it out lightly you may have to place the screw driver over the top of the door release button and pry that way. Don't loose your cool its a pain but it will fall out. Once its removed unhook the panel.

Next lift the plastic cover and remove the six gold2_bing.gif bolts first(For motor and regulator) Then push the window down till you see the two bolts holding the window to the regulator .Remove them, BEFORE YOU PULL OUT THE MOTOR AND REGULATOR YOU WILL SEE TWO TANGS THAT HELP HOLD THE REGULATOR AND MOTOR TO THE DOOR MARK THE RELOCATION , NOW pull out the motor and regulator have an assistant hold up the glass while you place the two blocks of wood to hold up the window. Now order your regulator and installation is in reverse. Good luck kate. Keep me posted.
Comments:

Apr 21, 2010 | 2000 Toyota Camry Solara

1 Answer

The drivers side, rear door window will not raise. Also the passenger side front door will not operate. I am needing some kind of directions as to how to go about changing out the 'motor and the...


The motor is the regulator its one part.
You'll need a block of wood ( to hold up window if you don't have an assistant).
Remove screws from door panel pry out switch and discon it from connector.
The inside door handle is a little tricky use a flat screw driver and insert it on top of door handle trim where thesilver release handle rests and pry out the trim. Do it on top of the trim and on the bottom where the silver release handle sits. There are two parts to this door handle,Its trim and the handle itself.
Once you got the trim off the panel is easy as pie. just don't forget to pull electrical connector threw panel.
Next two screws to remove handle.
Pull up plastic cover and you'll see the three copper bolts to release the regulator. Then two bolts to release the window from regulator. Use a marker to mark position of bolts for regulator and window.
Installiation is reverse.
Remember install regulator first then put window on regulator. And don't forget to pull electrical connector threw panel to re connect switch.

Mar 04, 2010 | 1996 Toyota Camry

1 Answer

Driver side door handle (outside) and gas pedal 2000 Camry


Bring the vehicle into the dealer if you have a sticky gas pedal. This is a TOYOTA PROBLEM.
Door handle:
It easy ! You need a philips2_bing.gif and flat screw driver,and a needle nose pliar.
Use flat screw driver and pry out the two or three dust covers for the arm rest screws then use philips and remove the screws. Next use the flat screw driver and pry out the black plastic mirror cover from the inside of the door. Pry out the switch with the flat screw driver and disconnect it. On the side of the door panel just above the striker/loch mechanism is this plastic push pull type of a hold in screw. Use flat screw driver to get it to move a little then pull it out with the needle nose. Depending on which door your doing if you have a map folder in the door there are two more screw to remove on the bottom of the door.
Now the inside door handle is tricky it comes out in TWO pieces. Use philips and get the only hold down screw you see out.( you may have to pry out a little screw cover first) Now the inside door handle cover is removed by placeing the flat screw driver on the rear of the outside of the cover top and on the outside rear bottom to release the tangs that are holding it onto the panel.Pry it out lightly you may have to place the screw driver over the top of the door release button and pry that way. Don't loose your cool its a pain but it will fall out. Once its removed unhook the panel.

Next lift the plastic cover and remove the door handle hooks and levers . Basically use common sense this is easy stuff. There may be two screws from inside of door panel that keep handle in place . Then work handle loose from outside and inside . reverse for installation.

Jan 27, 2010 | 2000 Toyota Camry

1 Answer

Need help on replacing door handle on toyota camry for the front driver side..


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If it's the inside handle, just disconnect the rod to the back of the handle to replace it. If it's the outside handle, pull back the weather seal and you'll be able to remove the bolts holding down the outer door handle

Sep 14, 2009 | 1995 Toyota Camry

1 Answer

Driver door handle of 2000 handle broken in half


FIRST YOU NEED TO REMOVE THE INSIDE PANEL. AFTER DOING THAT, WITH THE WINDOW ROLLED UP REMOVE 2 PLUGS ON THE METAL TO ACCESS THE TWO NUTS THAT HOLD ON THE OUTSIDE HANDLE. WHEN REMOVED, YOU CAN UNHOOK THE RODS THAT ACTUATE THE DOOR RELEASE. THE INSTALLATION IS THE REVERSE. I HOPE THIS HELPS. PLEASE FEEL FREE TO KEEP ME POSTED. THANKS FOR USING FIX-YA. ANY OTHER QUESTIONS, JUST ASK. GOOD LUCK

Sep 02, 2009 | 2002 Toyota Camry

1 Answer

How do I remove the rear door panel from my 2000 toyota camery? Specifically the inside door handle cover. I have the panel 90% off, however, I believe the door handle that releases the latch seems to be...


It is fragile but you take a small screw driver and pry the top horizantal part and then the bottom horizantal part slightly away and wella it will come off. The handle actually stays on the door I think. The cover comes off. When you do it once you'll see how easy it is.

Jul 16, 2009 | 2000 Toyota Camry

2 Answers

Replacing driver side rear view mirror with housing, non-heated


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jun 26, 2009 | 1998 Toyota Camry

1 Answer

'88 toyota camry rear window stuck in down position


To get to the Window:

Remove Door Inside Handle:
remove screw, slide the handle forward.
Disconnect the control link and remove the handle.

Remove Door Trim with Inner WeatherStrip:
Remove the two screws from the armrest.
Insert a screwdriver between the trim retainers and the door panel to pry it loose.  Eight hidden fasteners. 1 top left side of door.
1 right side about same height as top of armrest. 1 (each side) about same height as bottom of armrest. 1 on each corner bottom. 1 bottom in middle.  1 on left side between bottom corner and the previous at about lower armrest height...

Remove Service Hole cover.
Remove Door Glass Run.

Remove Division Bar (upper window section divider):
Remove the two screws under the weatherstrip
Remove the bolt.
Pull out the division bar.

Remove the Window Glass:
Place the glass in the door cavity.
Remove the two glass channel mounting bolts.
Remove the window glass by pulling it upwards.

You now have access to the Power Window Regulator; possible replacement of motor etc.

What type of 'things' have you tried for fixing the window and restoring operation?

Jan 22, 2009 | 1988 Toyota Camry

1 Answer

Diagram for replacing exterior door handles


ok. first u remove the door panel(s), with the window rolled up, u will be able to see the back side of the exterior door handle. there will be three bolts, they are size 10metric. there is also a rod attached to the handle held in place by a plastic clip, remove the rod, then remove the three bolts. from the outside remove the exterior door handle being careful not to scratch painted surface. Repeat for the other door(s). Repeat this for installation.

Dec 14, 2008 | 1997 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

480 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...