Question about 2002 Chevrolet Blazer

2 Answers

My drive shaft leaks, how can i fix it? - 2002 Chevrolet Blazer

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

I bet the seals were the drive shaft goes into are the problem. If its the transmission side simply remove the trans and replace the seal. The rear one has more to it if you look hard. A center pinion nut must be removed to gain entry to the seal

Posted on Jan 30, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

Remove it and replace the rear seal

Posted on Jan 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace rear seal (drive shaft) on manual trans and started leaking badly


Drive shaft have only one seal and seal rear side on metal bush
1 jak up littil gear box because after shaft remov ing time oil no feldown
2 remove drive shaft rear bolt
3 mesher drive shaft seal touching area
4 mesher drive shaft Bush touching area this area damage want send machine Shoppe bush cover and drive shaft that time send seal also
Damege change that Bush also

Apr 25, 2016 | 1998 Isuzu Amigo

1 Answer

How do i fix oil leak from seal


you will have to replace the seal or shaft. i would use adhesive to stop the leak its a cheaper fix.but to be done correctly it needs replaced 12_5_2013_5_28_18_am.jpg

Oct 23, 2013 | Cars & Trucks

1 Answer

Rear defferential leaks


Well of course it needs fixed. Is it a 4 wheel drive. Is it a leak at the pinion shaft or the axle shafts? See it isn't easy to give you the help you have sought after, not sour from me but I just need to know.

Feb 10, 2013 | 2003 Dodge Caravan

1 Answer

Leak around shaft and verry heavy after long drive


leak around What shaft, drive shaft, CV shaft, etc???
If drive shaft, on rear whell drive vehicle, the transmission needs a new rear main seal!
Good luck

Jan 21, 2011 | Daihatsu Rocky Cars & Trucks

2 Answers

How do I fix leaking CV boot?


u have to dismantle the drive shaft from the car. maybe u need little knock to the edge of the cv to split the shaft with the cv. then install the drive shaft in reverse order step.

Nov 19, 2010 | 2003 Lexus LX 470

1 Answer

Tranny fluid dripping off the drive shaft still!


Hi!!

Check that the transmission is not overfilled, if OK, could be that the seal got damaged (which is very easy to do) when installed or when inserting back the drive shaft. I use the old seal to align the new one, a piece of wood and a rubber hammer to drive it in, always checking that is going straight. Before inserting the drive shaft, clean it good and lubricate w tranny fluid, that reduces the friccion when inserting it back.

Hope this help you fix your leak. click below if helpful. Good luck.

Apr 02, 2010 | 1996 GMC Sierra

1 Answer

Transmission leak


Hi,

No clamp, it sounds like it is just a bad seal.
Just remove the drive shaft and pry out the old one and tap in a new one. very easy on those cars. juts make sure you put some tran fluid on the rubber part of the seal before installing the drive shaft or it can tear it.

Mar 31, 2009 | 1988 Mercury Grand Marquis

1 Answer

My 1986 toyota cressida leaks transmistion fluid out bottom of car where drive line connects to transmisson the transmission is fine how do i fix it


Based on your description I am going to assume your leak is @ the rear of the transmission. If so, the leak would most likely be from the transmission output seal. To fix, you will have to remove the drive-shaft by unbolting it from the rear axle and sliding it rearward out of the transmission. Once the shaft is out of the way, you will need to remove the seal by inserting a pry bar or large screwdriver between the transmission output shaft and the seal lip and pop it out. Sometimes you may have to partially collapse the steel shell inward towards the center with a small chisel and hammer to releive the press fit. Drive the new seal into the bore and reinstall the driveshaft. Check fluid, road test and check for leaks after the road test.

Mar 25, 2009 | 1986 Toyota Cressida

1 Answer

Oil leak


The Drive Shaft?! If it is the Drive Shaft it is an Easy Fix. You will need to Remove the Drive Shaft and Replace the Seal that is at the Very Rear of the Tranny. Check the Tranny Fluid. Tranny fluid should be your Leak. The Fluid is Red Right?

Jan 22, 2009 | 2001 Kia Spectra

1 Answer

Rear transmission leak


it sounds like you have a tail shaft seal gone in the transmission it's not a difficult fix if you are handy. Remove the drive shaft and remove the tail stock seal(there are install and removal tools but a hammer and a screwdriver will remove it nicely)then replace with new seal (if you don't have the install tool a 5" long piece of 2x4 and a hammer works BE GENTLE!!!!)and reinstall drive shaft..........these seals are available at your local auto parts store and are usually no more tan $10.00
hope this helps!.........good luck!

Jan 11, 2009 | 2001 Ford Expedition

Not finding what you are looking for?
2002 Chevrolet Blazer Logo

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...