Question about 2001 Saab 9-3

1 Answer

Hood release not working

When I pulled the interior hood release, it moves back but the hood does not pop. How can I get the hood open?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 564 Answers

You will have to pop the mechanism open from under the car this may be a little difficult you will need a very long screw driver or a pry bar and hopefully you be able to see the latch from under the car.if you can then reach up and manually release the latch once open you will have to replace your cable or the cable tie down which ever is bad. if not you will have to make a new release that you can use on the outside of the car.

Posted on Jan 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 quattro , battery is dead and hood wont release.Is it an elecrtonic release?


Heidi, No electric release. The latch is probably stuck. While you pull the interior hood release have an assistant push down and pull up repeatably/vigorously until hood releases from stuck position. Lube latch and cable before closing hood. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Open Hood How To 2001 2005 Audi Allroad Quattro 2002 Audi Allroad Quattro...
2007 Audi A4 2 0t hood latch fix when you can pop the hood
Hood Latch Release Cable Broken How to open hood
Help Hood release cable disconnected somewhere any ideas how to open hood...

Apr 15, 2016 | 2005 Audi Allroad Quattro

1 Answer

Hood release inside car isn't working


yes actually, you might need to lay on your back with a pair of pliers though, when you pull on the hood-release handle under the dashboard, you will see a wire cable behind the plastic handle, grip that wire with the pliers and pull till you hear the hood pop, then adjust the cable from under the hood to remain shorter.(it's stretched a bit over time is all)

May 07, 2014 | 2002 Chrysler 300M

1 Answer

2008 Mitsubishi release cable for Hood not working. When pulling on release inside car, the hood does not pop open to reach under and release the safety latch


I have a similar problem on my 2006 VW Passat.

I'm able to open the hood two ways:
1) ask someone to hold onto the lever inside the car while you try to lift the hood to the point where you can use the unlatch button and open the hood fully.


2) Pull the lever completely open in the car and try to find a thick screwdriver or some thick paper folded up to wedge next to the lever to hold it open while you get out and try to lift the hood to the point where you can use the unlatch button and open the hood completely.


Other than this finding a service manual or tutorial online about how to pull out whatever trim or interior covers you would need to replace the cable fully. There should be a specific replacement guide for this item since I'm sure it happens to car's at least semi-regularly

Aug 31, 2013 | Mitsubishi Galant Cars & Trucks

2 Answers

Hood release inside my 2000 ford focus popped to release but I can not open the hood of the car? what should I do?


Might just be stuck. Have someone pull the release as you FIRMLY pound on the front of the hood in the middle with your fist (NOT A HAMMER ! ! ! !).

If that works and it opens, get some WD40 and spray the latch and cable, lever, etc... and then work the release lever before closing it again. If the cable has broken....... it is very difficult to release without some automotive knowledge. I'm betting it is just stuck...


Good Luck.

Feb 06, 2011 | 2000 Ford Focus

1 Answer

The interior hood release isnt working is there a way to relase the hood manually from outside the truck on a 2010 toyota tundra


try this,have another person push down on the hood in the front of your truck,while they apply downward pressure,pull hood release out,keep the hood release pressure pulled out,tell the other person to let up on hood,then release the pressure you have on the hood release handle and hood should pop up.if this does'nt work,you have a broken hood release cable.that means you'll have to get on the ground under front of truck and reach up to the hood release cable with pliers and pull the cable release manually.good luck hope this helps and thank you for choosing fixya.com

Jan 10, 2011 | Toyota Tundra Cars & Trucks

2 Answers

How do I open the hood of a Mitsubishi L300 ?


  1. Locate the interior hood-release lever under the dashboard on the driver's side of the interior of the car.

  2. 2

    Lift up and toward you on the hood release lever. The lever is connected to a cable that releases the hood. The hood will pop up about 1/2 inch when you pull the lever.

  3. 3

    Move to the front of the car and locate the exterior hood-release lever under the front of the hood. It is located near the middle of the vehicle, just beyond where the front edge of the hood meets the body. Lift up on the inner lever.

  4. 4

    Lift up on the edge of the hood while holding the inner lever in place. When the hood is up, find the hood prop and raise it, setting its tip in the hood-prop mount on the hood, to hold the hood up while you work in the engine bay.



Read more: How to Open the Hood on a Mitsubishi Endeavor ' eHow.com http://www.ehow.com/how_6301122_open-hood-mitsubishi-endeavor.html#ixzz16Ou5FhQF

Nov 26, 2010 | Mitsubishi Lancer Cars & Trucks

1 Answer

I can "release" the hood on my 1999 Audi A4 from


Yes, you will be able to open the hood if you pull off your splash guard and use a long long flat head screwdriver or something like that. You'll see the hood latch in front of the radiator with the cable attached to it at the top near the hood, put it on the drivers side edge of the bottom of the latch and pry to the passenger side, the lever moves from the drivers side to the passengers side, the cable basically pulls the top of it to achieve this. so your doing the same thing on the bottom with the screwdriver.

tdisline_0.jpg
Release the latch from underneath by the lever that you have to pry towards the passenger side. Then open the hood, and repair or replace the safety release mechanism. This is very simple to remove out from the hood.

Nov 03, 2010 | 1999 Audi A4

1 Answer

02 intrepid hood safety latch wont release


If you pull on the release handle inside the car and it does not "pop" the hood open, make sure the hood is not already "popped". If it is, then try to push the hood down firmly until it does not pop up anymore. Then, try the interior pull handle again. If the hood is completely closed and the pull handle does not pop it open, try to remove the handle slightly from the dash. This involves removing 2 phillips head screws (one from either side of the handle). When these are out, you should be able to pull the handle and its small trim/holder piece. See if this is broken and try to pull back on the actual release cable ("silver" braided wire) with a pair of wires.

If nothing above pertains to the issue, then let me go to a different one. If the pull handle works fine and "pops" the hood like normal, but you are unable to unlatch the hood, then I need more information as to the conditions of the problem. Has it released properly in the past?

Also, make sure that you are pulling the correct lever when trying to unlatch the hood. Standing in front of the car facing it, the lever will be just to the left of the very center of the hood. It should have a yellow end. Pull up on that and everything should release.

If these ideas do not help you out, then I will need more information. Let me know and I'll be glad to help you through.

Aug 09, 2009 | 2000 Dodge Intrepid

2 Answers

1987 xjs hood is stuck car has been sitting for years


it lifts from the back and tilts foreward ,their are two cables running from the interior lever ,best thing is for you have a look at another one and if you can jack car up and try to reach each lever in turn with a long screwdriver and push or pull it with a wire .best of british with it

Jul 09, 2009 | 1987 Jaguar XJ6

Not finding what you are looking for?

Open Questions:

See all 2001 Saab 9-3 Questions

2001 Saab 9-3 Logo

780 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...