Question about 2006 Ford F-150

2 Answers

Front hubs will not work when 4 wheel drive is in

Posted by on

  • Steve S
    Steve S May 11, 2010

    How did you verify the front hubs are the problem ( vs front drive shaft ) ?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

IWE solenoid is the cheapest first option. The second part is a little more expensive to play with and harder to test. It is the transfer case shift motor. Mine had internal wiring out of tolerance according to the dealer with DTC code of P1867 followed by a TSB 06-9-8. Shift motor is 8L3Z 7G360 A Motor ASY

Posted on Feb 02, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 194 Answers

Your looking for the iwe behind the battery its about a 20 dollar part but before you get a new one check the vaccum lines on behind the tires if thier on pull them off and check for moisture if their off put them on and try them if that dosnt work replace the iwe, you might have to zip tie them to the brake line so they wont fall off

Posted on Jan 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can you get free wheeling hubs for a 2003 rav 4 all wheel drive


Not without changing most of the front components out.

Jan 12, 2017 | Cars & Trucks

1 Answer

2000 ford f250, four wheel switch locked in in cab, no front wheel drive, lock in both front wheel hubs and now have 4 wheel drive. Flip off switch inside and no longer in 4 wheel drive.


I really don't know quite how to tell you this. Everything seems to be working just fine buy your question. When your using 4 wheel drive, you engage the hubs first, then push the 4 wheel drive button or turn the switch. Ease it in and out of gear or shift on the move and you should be in 4 wheel drive at this point. To take it out of 4 wheel drive, reverse this procedure. Turn the switch off and ease forward and you will be out of 4 wheel drive. If your not going to use your 4x4, turn the hubs out to reduce ware on the axles. If you will be using 4x4 again soon, leave the hubs in and all you have to do is turn the switch to 4x4 and your set to go. I hope I explained this well enough. Good luck.

Feb 10, 2015 | Ford Cars & Trucks

1 Answer

1997 toyota tacoma will not go into 4 wheel drive


Has the transfer case ever been serviced? The fluid should be changed every 30,000 miles, if not the works can stick and cause engagement problems. Make sure the vacuum to the front hubs is available, if the front hubs are not locking the front drive shaft will turn but no Front wheel lock up and no 4 wheel drive is available.

Oct 05, 2012 | 1997 Toyota Tacoma

2 Answers

4 wheel drive not working won't engage front


have you checked the front hubs are engaged or engaging

Jan 20, 2012 | 2000 Isuzu Rodeo

2 Answers

The driver side front wheel does not engage in 4 wheel drive


manual or auto hubs?how do u now it is not engaging?.u can lift the front end up in 4 wheel make sure hubs r engaged .rotate the tire by hand ,and check to see if the drive shaft is turning [from the wheel to the front diff] u most likely have a bad locking hub.if it is not turning ur front tire is not locked up

Dec 29, 2010 | 1994 Ford Bronco

2 Answers

Front drive shaft not fully engaged in 4WD, with truck on stands all 4 wheels do rotate but if i stop front wheels the front drive shaft is not engaged


Hi,
Do you have auto locking hubs on the front wheels, or manual locking hubs?
If you have auto locking hubs chances are they are not engaging properly and will need to be removed and spline sets checked for broken teeth on locking hub and locking shaft.
If you have manual locking hubs then check that they are firm when turning to engage them in the lock position.If they are light when engaging them to the lock position then they my have broken/worn out the locking hub and spline. Also check that the engaging spring inside the hub has enough tension to engage the hubs they may be broken. If the hub are all ok then you have a problem in the transfer box, where the 4WD lever is not meshing the transfer box properly. Hope this helps, let me know how you get on.

Jason

Apr 04, 2010 | 2002 GMC Sierra C/K1500

1 Answer

I have a 1997 gmc pickup with 4-wheel drive. The


You probably have blown drive hubs. Do you have to engage the hubs at the wheels? If not and they are automatic locking and they are probably blown or seized into the unlock position. They are not too expensive to replace with manual locking hubs (My Suggestion) but the autolocking hubs are expensive. When you take the caps off the front drive spindles and try running it again you may see the axle turning inside but not the wheel. That is the best test. Wish you luck!!

Jan 05, 2010 | 1997 GMC Sierra K2500

2 Answers

Is it right for your front drive shaft to turn by hand when in park


i'm assuming you have a 4 wheel drive. If that is the case then yes cause when your in two wheel drive mode the front is in neutral

Oct 16, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

Transfer case locks into low gear but front wheels do not pull


You have to have your front hubs locked in for four-wheel drive to work

Jun 10, 2009 | 1992 Jeep Wrangler

1 Answer

I have a Disco II and the wheel hub bearing went and i'm tryign to change it but i cant seem to get the hub off, can any one help with a step to step guide or something, thanks.


RAVE says the following:
1) Release ABS Sensor harness grommet from inner wing valance and disconnect multi plug.
2) Raise front of vehicle.
3) Remove road wheel.
4) Pull ABS Sensor harness through aperture into wheel arch.
5) Release harness from brackets on inner wing valance, suspension turret and front hub.
6) Release stake from drive shaft nut
7) Remove drive shaft nut with assistance & discard.
8) Remove front brake disk (Remove calliper, pad holder, screw and tap to remove)
9) Remove 4 bolts securing wheel hub to steering knuckle.
10) Release wheel hub from steering knuckle then remove wheel hub and drive shaft assembly from axle. DO NOT REMOVE ABS SENSOR FROM HUB. HUB AND SENSOR ARE SUPPLIED AS AN ASSEMBLY.
11) Position the wheel hub and drive shaft on a press, place supports beneath the wheel studs and press the drive shaft from the wheel hub.
12) Remove drive shaft oil seal from axle casing.

Refit is mostly the reverse, you need to take care to lubricate things in the right places and put loctite on the drive shaft and locate the loom and torque everything right.

Mar 24, 2009 | 1999 Land Rover Discovery

Not finding what you are looking for?
2006 Ford F-150 Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...