Question about Nissan Quest

2 Answers

Hello I am having trouble with my 2000 quest van TV console with the VCR. The vcr is playing and we can hear sound. The TV is black and when I press Select or picture normally the TV will come on a show a picture. It is now doing this now

Posted by on

  • Tabitha Jackson Jan 30, 2010

    The VCR is WORKING. The power button lights up on the TV console but when I press the Picture button on the TV console nothing happens - no picture appears. The Select button seems to be working as well. The TV screen doesn't come on. I need to know what to do please.

  • Tabitha Jackson Jan 30, 2010

    Thank yo sounds like i need to take it into the shop

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 258 Answers

First try to dissconnect the battery ground for 20 min. reconnect and try again. on that one is the tv and the vcr the same unit or seperate if same unit then u need to pull everything out and check connections and fuses.

Posted on Jan 30, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

My information does not show the wiring for this. All you can do is check in you owners manual fuse location section to see if a fuse may of popped. You could just pull all the fuses one at at time and inspect. The fuse cover may have a legend on it also.

Normally the vcr and the TV use the same fuse. If you have power going to the TV which would need to be tested with a meter then either the picture failed internally or the button failed.

Posted on Jan 30, 2010

  • Susan Price Jan 30, 2010

    So basically I gave you the corect advice, You gave me a low rating and rejected me so I don't get paid Thanks. I hope you can sleep at night.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my 2000 Nissan Quest emits humming sound when engine run


Most likely, that is the sound of the FUEL PUMP. If the car is running well, don't worry about it. Try changing your fuel filter to see if that helps (usually does).
If you have trouble with fuel delivery at high speeds or under load, suspect that your fuel pump is about to fail.

May 16, 2015 | 2000 Nissan Quest

1 Answer

Where is the turn signal flasher located for a 2000 Nissan Quest


2000 Nissan/Datsun Truck Quest Mini Van 3.3L SFI 6cyl


Flashers

Print
The turn signal/hazard lamp flasher is located behind the driver's side of the instrument panel to the right of the steering column.on the fuse block
REPLACEMENT
  1. Disconnect the negative battery cable.
  2. Locate the flasher assembly under the driver's side of the instrument panel. Press the tab on the flasher and slide it from the bracket.
  3. Detach the flasher from the electrical connector and remove the flasher from the vehicle.
  4. The installation is the reverse of the removal.

Nov 04, 2013 | 2000 Nissan Quest

1 Answer

Replaced distributor in 2000 nissan quest ,now van wont start


check if there is spark in your plugs, if none, just replace ignition coil.

Jun 10, 2013 | 2000 Nissan Quest

1 Answer

I hear noise when I start my 2005 nissan quest and then it goes away. I only hear the noise when i start the van and the van has been parked for hours.


because of the age of the vehicle this is a possibility. if it sounds somewhat like a rattle have the heat shield about the catylitic converter checked. tho it's often made of aluminum so it doesn't rust it can become corroded around the bolts and come loose.

Sep 27, 2010 | 2000 Nissan Maxima

1 Answer

Have a 1992 chevy g20 van. the van has a tv/vcr


you'd have to find out what colored wire is behind the plugged in vcr wire theres gonna be a black n red , or black n yellow ( something like that) the black is ground ( frame/body Connected) the colored wire will usually be the powered side. , then follow that colored wire to the fuse box and relocate that powered side wire to connect to another wire , down at the fuse box that powers up with the key on. just connect it to the appropriate wire. stereo shops or car dealerships can fix that issue real quick. normally for a few dollars.

Jul 31, 2010 | 1992 Chevrolet G20

2 Answers

Cannot get my vcr in my 2000 Pontiac to work


vcr? wow, I honestly thought they were obsolete, not trying to be a smart ***, but everyone has converted to dvd. I can help you do the same if your interested in doing so, my advice is free btw<< by the way...if I can help you

Dec 17, 2008 | 2000 Pontiac Montana

1 Answer

Vcr


If the system is the one that was factory installed, it does not need cables. The VCR slides into the console and makes it's connection via a connector on the bottom of the unit. The connector panel that is on the rear of the console, facing the rear passenger seats, are there to allow you to plug in a DVD , video game, or MP3 player. If your Windstar has the remote control, it is easier to program, but you can program everything from the front radio controls.
Hope this helps.
rayd113352@aol.com

Oct 15, 2008 | 2001 Ford Windstar

2 Answers

2004 nissan quest idles rough when van is stopped


Have 2004 Nissan Quest. After 40 mph Van runs rough and there is a loud rattleing noise that sounds like an old 4 bbl carb waaaah, but ther is no code

Aug 14, 2008 | 2004 Nissan Quest

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...