Question about 1999 Ford Ranger SuperCab

2 Answers

Four wheel drive will not engage on 99 ford ranger. is there a fuse and where is it located

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

It could be a number of things most likely a vacume line usually aroung the front bumper under the air box

Posted on Feb 08, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 396 Answers

Transfer case motor

Posted on Jan 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Were do I locate four wheel drive actuator relay on 2002 Ford ranger four wheel drive


The entire assembly is mounted to the back of the transfer case, it contains all the parts except the control module.

Jan 25, 2012 | 2002 Ford Ranger Regular Cab

2 Answers

Front tires wont engage in four wheel drive


if the actuateor is vacumed,you might have have a hose that came off or it has a split in it somewhere,check that.or if you have posilock hubs one or both may be wore out or lacking grease,they are easy to remove,just a hex wrench and snapring pliers is all you need,remove and inspect for obvious sighns of wear.

Feb 03, 2010 | 1997 Ford Ranger SuperCab

1 Answer

While driving, four wheel drive quit working. It


Check the fuse for the four wheel drive before taking another step,it is electrically engage,hope that help you and clear your mind

Jan 17, 2010 | 2001 Ford F250 Super Duty Super Cab

1 Answer

1988 ford ranger push button four wheel drive an it wont engage all the wires are good it just clicks when u push the button.. what should i look for to make the four wheel drive work again it wont...


Start out with buying yourself a $25 book from the Parts House. The I would go to the front HUBS, secure & safety vehicle before you do anything, Clean, Inspect, Lune & Repair front Hubs as required, get the brakes while you're there. Check your drive line, axles, u-joints etc. Clean , repair , replace as needed. Check for Tranfer case Operation. Is there power going to the front Axle when 4WD is engaged? do you feel a change when you engage the Transfer Case? Have you checked the Power on the circuits? Have you Manual or Auto-locking Front Hubs? Answer all those Questions & read before you do anything.

Nov 03, 2009 | 1988 Ford Ranger

1 Answer

Four wheel will not engage


you need to also check the relays that are in same circuit

Aug 14, 2009 | 2006 Ford F-150

1 Answer

Four wheel drive computer clicks when i try to engage 4x4


tap on the 4wd motor on the transfer case while someone is pushing the button, if engages you need a new motor

Jun 30, 2009 | 1987 Ford Ranger

1 Answer

I just purchased a 1994 ford ranger with 125,000 miles and runs great until last night when i had to engage the four wheel drive.It made a bad clunk and whining noise for some time and now i can hit the...


It sounds like the electric motor for the 4 wheel drive may not be engaging. It could also be the magnetic clutch for the 4 wheel drive may not be working. This sounds like an electrical problem.

Apr 27, 2009 | 1994 Ford Ranger Supercab

1 Answer

PUSH BUTTON FOUR WHEEL DRIVE FORD RANGER NOT WORKING


the transfer case is sticking from non use, change the lube in the case ( Ford ATF) and drive it for awhile it should be ok then.

Apr 07, 2009 | 1988 Ford Ranger

1 Answer

99 Ford Ranger xlt 4x4 The 4 wheel drive won't always kick in Looks like the electrics are working but the hubs just won't always kick in.


I had the same problem w/ my 99. If you have auto hubs, they work off a vacuum pump which is located under your air filter box..check to make sure it is working..is that is working it's on to the hubs..the locking hubs are the black caps in the center of each from wheel..they snap on and off..hard to take off without breaking a few tabs..the seal one or both may not be holding the vacuum created by the motor under the airfilter box. if one of the hubs has a vacuum leak neither side will work, it's all or nothing..aside from the electric parts on the dash and side of transmition that's about everything there is to know about 1999 ranger four wheel system.

Mar 18, 2009 | 1999 Ford Ranger SuperCab

1 Answer

Four wheel drive doesn't work


check the fuses, then if they are ok pull the engagement motor out of the transfer case and test it.

Dec 24, 2008 | 1987 Ford Ranger

Not finding what you are looking for?
1999 Ford Ranger SuperCab Logo

463 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...