Question about 2007 Ford F

1 Answer

I have a ford ka p reg no leaks on cooling system have done a flush still no heat out blowers pipes into heater rad are hot in and out are there any other sensers that need to open

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

There is a temperature actuator motor that has gone out,it is on top of the blower box,toward the center of the truck.You may,or may not have to remove the dash to replace it,look behind the glove box and to the center of truck,to see if you can access the actuator motor.

Posted on Jan 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My heat was working only on occasion in my 2005 Toyota Highlander. I took in for repair and they replaced thermostat, upper and lower rad hose, and flushed the cooling system. That did not fix the...


if they flushed the cooling system, the heater core was already done with that.. what temp thermostat was put in..are the blowers working or not..youmay have a heat control valve stuck shut..

Dec 22, 2013 | 2005 Toyota Highlander

1 Answer

Vauxhall vectra reg owners manual


you need to back flush the system. take the hoses of the rad line to the in side rad. and flush it out. at same time may aswell to the rest of the system get all the muck out of the system. needs to be done evey few years.

Nov 26, 2013 | Vauxhall Cars & Trucks

1 Answer

Blower works no heat on 1999 Ford Taurus


Check the heater hoses that go into the firewall to the heater core, they both should be hot,if only one is hot and the other isn't,then the core is plugged. Remove the hoses at the firewall, buy of hose the same diameter,buy enough length so that you can flush away from the engine compartment, install it on one of the heater core pipes,using a garden hose with a jet sprayer slowly blast water into the hose, until you see clean water coming out from the other pipe. Remove the hose and install it on the other pipe of the heater core and repeat the process,you may have to do it several times to completely unplug it. This is a typical problem with a 3.0, 2 valve taurus,coolant looks brown and rusty. The entire cooling system should be flushed, if it isn't the heater core will plug again.

Apr 07, 2012 | 1999 Ford Taurus

1 Answer

My S reg ford escort diesel only blows cold air or very luke warm air can you help?


CHECK FOR LOW COOLANT,NOT ENOUGH COOLANT IN THE SYSTEM.IF COOLANT LEVEL OKAY.THERMOSTAT NEED CHANGING STUCK OPEN.IF THERMOSTAT BEEN REPLACED.CHECK BOTH BOTH RADIATOR HOSES AND HEATER CORES HOSES THEY ALL SHOULD BE VERY HOT.IF ALL HOSES HOT AND BOTH HEATER CORES HOSES GOING INTO FIREWALL IS HOT.HEATER DOOR NOT OPEN ALL THE WAY OR STUCK.IF ONE OF THE HEATER HOSES GOING INTO FIREWALL HOT AND OTHER HEATER HOSE COMING OUT OF FIREWALL NOT HOT.MORE LIKELY HEATER CORE PLUGGED NEED TO FLUSH OUT COOLING SYSTEM.FLUSH OUT COOLING SYSTEM IF NOT BEEN DONE IN A LONG WHILE.

Nov 04, 2011 | 1998 Ford Escort

1 Answer

Hi have a xj 01 with no heat inside fan is working pipes out side are hot when running but no heat in side


It may be a problem with your vent control system in your dash. You have a vacuum supply that comes from the top of your engine and travels through your firewall and under your dash to be used to activate the movement of your vent controls. If you have a break in this vacuum line, your vents will not move to change from cool to hot air regardless of where you put your control dial.
That could be your problem.......... or your heater core could be plugged. The core is a mini rad that is under your dash. It takes in hot engine coolant and acts as the heat source. This mini rad sometimes plugs up from ordinary use. Deposits slowly gather up and eventually clog up this rad making it useless. This rad may need to be replaced. Even though your pipes going under your dash are hot, the flow is probably very very slow and not giving enough flow to create heat for you inside your car.
You maybe able to flush out the mini rad by waiting till the engine is cold, then disconnect both hoses under the hood going under the dash, blow out most of the coolant remaining in the heater core(if you can)( also be careful of your eyes) then block one of the lines and put some rad flush through the other line(use a funnel with a hose attached). Leave it there for a while then try running water through it with a garden hose. Be careful to not splash the rad flush fluid in your eyes(wear safety glasses and also wear gloves. Repeat if you feel. Try to flush out as much of the rad flush as you can before reattaching the hoses. Remember to add some coolant cause you will lose some. It would be better to add coolant to the heater core before you attach the hoses to get most of the air out of the system. Good luck

Dec 31, 2010 | 1995 Jaguar XJ6

2 Answers

Heater not heating hot enough. heater core not


Good place to start is a cooling system flush and thermostat replaced.

Dec 28, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

I have a 2004 Monte Carlo SS with the 3.8 non super charged engine in it. The cars operating temp is just under half on the guage and the blower motor works good but very little heat coming out at best it...


either the heater rad is blocked where someone has put a leak sealer in or the flaps are not operating properly,if the pipes appear hot ?? then i would be inclined to disconnect the pipes and try flushing the rad with a hose and reverse the direction of the water flow 2/3 times ,dont forget to refill with antifreeze

Dec 08, 2009 | Chevrolet Monte Carlo Cars & Trucks

2 Answers

Ford courier 1.8 diesel van, blower works, but no heat comes into the van when heater turned on


ford courier workhorse ,great van ---right when engine is hot feel the hoses that run into the heater ,also it could be the heater core was leaking and someone has joined the hoses together .if the hoses are connected and they are hot then ,try removing them and then flushing the heater with a hose pipe

Nov 29, 2009 | 2000 Ford Escort

1 Answer

Dodge caravan cooling and heating troubleshooting


Was the sludge Orange or more of a tan or brown colour? If there is a tan or brown colour sludge in the rad, this usually indicates a head gasket leak. I would flush out the cooling system and be sure that there is good coolant flow through the rad ( you should be able to see the coolant moving in the rad with the rad cap off and engine running) as well as no air locks in the cooling system. Feel the heater hoses at the fire wall with the engine at opperating temp. The hoses should be hot and close to the same temp. If not then there is a flow problem or a plugged heater core. hope this helps..Good luck.

Feb 05, 2009 | 1995 Dodge Caravan

2 Answers

Heat does not come on when truck is not moving 2002 Dodge Ram


you need to get under the dash board and remove the passenger lower kick panel. ther will be a small motor bolted into the evaporator housing. remove it and manually move the blend door. if the heat gets hot the you need a blend door actuator.

Jan 18, 2009 | 1998 Dodge Ram 1500 4WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...