Question about 1999 Daewoo Nubira

1 Answer

When put in reverse the lights dont work. have checked bulbs they are ok. any suggestions welcome

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Daewoo Master
  • 2,030 Answers

Have you checked for voltage at the light socket with the bulbs removed? If no voltage, then you may have a bad reverse switch. If you have voltage, (with car off, car in reverse, and ignition on) the try new bulbs. Even a bulb that LOOKS good can be bad

Posted on Jan 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reverse light and backing camera is not working. Might it be a fuse folt?? where could I find it?


check light bulbs are ok in reverse lights. Check wiring to reverse lights - see if they put a fuse at or near where they tapped power off reverse light.

Mar 07, 2016 | 2009 Nissan Murano

1 Answer

Reverse lights dont work when put into reverse gear


check bulbs failing that probably a new switch of the gearbox if fuse is ok

Mar 02, 2015 | Cars & Trucks

2 Answers

Reverse lights dont come on


Check for voltage at the neutral safety switch if the bulbs are good.
The switch also powers the backup light bulbs in reverse.

Aug 06, 2012 | Cars & Trucks

2 Answers

My back reversing lights wont work but the bulbs and the fuse are all good?


Hello and welcome to FixYa!

If that's the case then it's definitely a reverse switch issue. If the reverse switch is faulty, the reverse light won't work even if the bulbs are fine. It is located underneath the transmission where it triggers when reverse is engaged. Have it replaced and you'll be good.
Hope this helps and thank you for using FixYa! Have a good one!

Jun 01, 2011 | Suzuki Grand Vitara Cars & Trucks

1 Answer

My reverse lights dont work checked fuses and bulbs all good


did you test for power to the bulbs, possibly a bad ground connection for the bulbs, or the selector lever is broken reverse sensor is usually on the trans

Apr 04, 2010 | 2004 Chevrolet Silverado 2500HD

3 Answers

My reverse lights dont work put new bulbs in but still dont work


you might have a reverse switch fault check on the box to see if it is connecting to the gear leaver when you put it in reverse..if not then that will have to be replaced, it might be the plunger in the switch broken or worn away..hope this helps

Feb 16, 2010 | 2004 Mazda 6

1 Answer

Reverse lights dont work.escort van.1.8 none turbo.2002.


With engine off and key on, emergency brake set, place the gear selector in reverse, using a volt ohm meter check for voltage at bulb terminals. If voltage is present then the switch is working and the wiring to the lamp is good. Next check the other terminal with the ohmmeter to ground for connection. Sounds like a bad ground.

Jul 27, 2009 | 2003 Ford E-Series

1 Answer

Rear lights do not work, bulbs ok, fuse ok


You  probably have a frayed wire touching something metal (short to ground) check your wiring, check your grounds.

Feb 26, 2009 | 2000 Ford Focus

2 Answers

1991 volvo tail lights


Could you take out a bulb and with a testlight/probe check that you do in fact have power to that circuit .Also check that they are the correct bulb for that application I have seen people put indicator bulbs in where therse supposed to be a double filament bulb.Does the base of the bulbs lead contacts line up with the two steel terminals inside the plug?

Oct 20, 2008 | 1991 Volvo 240

Not finding what you are looking for?
1999 Daewoo Nubira Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...