Question about 2005 Audi TT

2 Answers

Wipers , heater , indicators does not work - 2005 Audi TT

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My audi tt 03 have a probleme with gauge temp and a feew time the dashboard shut down thank all

Posted on Feb 14, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 73 Answers

I have came across this before,once all fuses are checked and still no joy. then if these problems happened at the same time then it could be an ignition switch fault, try your hazard lights to see if they work, also try wiggling the key about in the ignition to see if anything happens if so it might just point to the problem. 

hope this helps.

Posted on Jan 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't my 2001 Ford Taurus have heat but the blower motor works but only blows cold air.


Is the coolant level full ? Are the heater hoses hot to the touch ? Do you know where the heater hoses are ? Out in the engine compartment going through the fire wall into the passenger compartment . 2 hoses , one carries hot coolant into the heater core the other is a return back to the cooling system . If hoses are hot you have a temp. door not working . When warmed up what does temp gauge show ?
Temperature Control
The temperature control operates in the following manner:
  • Temperature control of the manual A/C-heater system is determined by the position of the temperature control knob (between COOL and WARM).
  • This control knob is connected to a potentiometer mounted in the integrated control panel. This potentiometer is electrically connected to the A/C electronic blend door actuator that operates the A/C air temperature control door.
  • The A/C electronic blend door actuator contains a reversible electric motor, another potentiometer and a printed circuit board. The wiper of the potentiometer is connected to the actuator output shaft and moves with the output shaft to indicate the position of the A/C air temperature control door.
  • Battery voltage is applied to the ends of each potentiometer. The voltage available at each wiper indicates the position of the potentiometer. The printed circuit board drives the actuator in whichever direction is necessary to make the actuator wiper voltage agree with the control wiper voltage.
System uses a reheat method to provide conditioned air to passenger compartment.
  • All airflow from the blower motor (18527) passes through the A/C evaporator housing where it can be cooled and dehumidified.
  • Temperature is then regulated by reheating a portion of the cooled dry air and blending it with the remaining cool air to the desired temperature.
  • Temperature blending is varied by the A/C air temperature control door which regulates the amount of cooled air that flows through and around the heater core (18476), where it is mixed and distributed.

Feb 24, 2016 | Ford Cars & Trucks

1 Answer

Indicators & wipers not working


check combination switch

Dec 19, 2013 | 2006 Renault Clio

1 Answer

Indicators not working


Check the fuses and panel for corrosion.Its highly likely that you have a water leak inside the car,causing the fuses to corrode. Id check all the fuses,and put electric grease on them all,...and then figure out where the water leak is coming from and fix it.

Sep 29, 2012 | 2005 Ford Falcon

1 Answer

Maid beam head light, indicators, window wipers and sprays, rear window heater and interior fan motor won't work


Check grounds around in engine compartment (usually bundles of brown wires) and fusible links

Jan 30, 2011 | 2002 Volkswagen Passat

1 Answer

Wipers, Brake light, heater and flashers have all


hazard relay should be the same as the turn indicators. They are separated with diodes that are in line with the wireing!

Dec 09, 2009 | 1985 Jaguar XJ6

1 Answer

Indicators were not working have had relay changed


problem has been solved incorrect relay supplied

Sep 16, 2009 | Ford F Cars & Trucks

1 Answer

1997 ford escort, heater blower and wipers don't work


Disconnect blower motor & try another fuse....if it don't blow fuse then blower motor shorting out..

Apr 06, 2009 | 1997 Ford Escort

1 Answer

No wipers no horn no indicators


your multi function switch is bad. hope this help buddy

Dec 17, 2008 | 2004 Volkswagen Passat

4 Answers

Renault megan coupe 98 electrical problem


see if you got any broken wires from your dash to the fire wall,it could be a short between the wires, but get a second opinion,thats all i can think of....

Hope it helps...

Sep 09, 2008 | 1986 Renault Sport

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14204 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...