Question about 1992 Toyota Paseo

1 Answer

How do i install the cams on a 92 toyota paseo. 1.5l I am changing the head gasket and had to take off the cams now i am putting it all back together. **** need to know how to alingine the cams up properly. didn't see any marks need to know how correctly set it up. thanks for any help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,740 Answers

First of all, bring your number one piston to top. Number one is the first one from the right (passenger side). There is a mark for this on the front of the belt cover. The timing mark on the crankshaft pulley should be aligned with 0. There will be two horizontal pit marks on one camshaft sprocket and one (a little bigger) on the other camshaft sprocket. These should fit together. Now the timing mark on the face of the timing belt sprocket should be a couple of degrees to the right of straight up. There will be a 5E on the timing belt sprocket. This 5E is what needs to be just to the right of straight up. Tighten everything down and your engine should start.

Posted on Jan 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

While driving my 92 Paseo it will cut out then continue on. I have replaced the IAC, fuel pump. It runs great otherwise with good power and 41 mph. What could be causing it studdercutout while driv


http://www.toyotanation.com/forum/59-tercel-paseo-starlet-sera-forum/ owners forums with all the informationa and advice you will ever need also it is a highly recomended car.

Sep 19, 2014 | 1992 Toyota Paseo

1 Answer

Have a 1996 toyota paseo I check the water level this morning and i went about 40 miles came to a stop and it shut down and had no water in radiator. Could it be the EGR value or the head gasket. Please...


It is not the EGR, it can be a head gasket, only a trained pro can check this and know for sure. You will need the system pressure tested and see if any of the cooling system components is leaking coolant.

Feb 06, 2012 | 1996 Toyota Paseo

2 Answers

Need 92 toyota paseo to pass CA smog test ! What causes too high HC in smog test????


High HC means moisture in the system. Try driving it longer then take it to the smog shop. Otherwise it could be hard like a head gasket or easy such as a PCV not functioning. Any ways you should always drive it about 20 miles before smog check, longer when the weather is cold.

Nov 30, 2010 | Toyota Paseo Cars & Trucks

1 Answer

How much would it ben to fix a blown head


it depend on the shop anywhere from $600.00-to-$1000.00 but this is something you and someone together can do and save all of that money give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

Mar 22, 2010 | 1992 Toyota Paseo

1 Answer

How to change brake lights on 92 toyota paseo


look in trunk behind light it might twist out

Sep 26, 2009 | 1992 Toyota Paseo

2 Answers

92 toyota camry v6 do they have 2 heads or just 2 cams


That is possible if it is not dual overhead cam if it is single overhead cam that would be right.

Mar 04, 2009 | 1992 Toyota Camry V6

1 Answer

92 toyota paseo alternator not charging


you may have missed a fuse or fusible link , there is a 100amp alternator fuse and a 50 amp fuse on that circuit , location of those 2 fuses are (left side of engine compartment) also there is a fusible link in that circuit right off the positive side of the battery , those big fuses don't look anything like a normal if that helps , cheers'

Jan 13, 2009 | 1992 Toyota Paseo

1 Answer

Starter on 92 Toyota Paseo


If the battery is good then it could be power cable to starter problem or connection came loose too.

Sep 14, 2008 | 1992 Toyota Paseo

Not finding what you are looking for?
1992 Toyota Paseo Logo

743 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...