Question about 1998 Chevrolet S-10 Pickup

1 Answer

Breack d'ont works bulls all are ok fus ok !! i check inside of swictcht ok on my chevrolet s10 v6 4,3l auto 1997 thks GEORGES jobymib501@hotmail.com or do you have the shema of the wiring or the swictht inside ,?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I fixya thanks for reply i just check on the switch inside they no contact betewen the lamell !!! everyting was ok fus bulls cabls just the probleme was inside the switch  is ezy to open by your self  L G

Posted on Feb 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What year engines will interchange with a 1997 s10


The 2.2L engine is fairly universal. You may need to use the original crankshaft position sensor, however. The 96 had a different connector than the 97 engines had. You should not have too much trouble swapping out this engine. Chevrolet is really good about not changing too many items for each year.

Apr 16, 2014 | 1997 Chevrolet S-10 Pickup

1 Answer

My 1997 s10 truck fuel guage does not work


If it was working before , drop the tank again low enough to check your connections, if ok, remove the assembly out of the tank and inspect, with the unit out, hook the wiring back up, turn the key on and manually swing the float and have someone watch the gauge.

Jan 05, 2014 | 1997 Chevrolet S-10 Pickup

1 Answer

I have a 1997 chevy truck ..four cylinder engine. Will the obdII work ok in checking it out. i want to be sure i buy the right obd scan tool. thanks john


I am about to purchase one myself. (Did not get one for Christmas like I asked for)

Look under the dash and see if you can find the connector. My 2002 S10 has the connector located there. From what I understand, the OBDII will work on 1996 and newer vehicles. I am looking at the Actron CP9179 scanner for the OBDII. It is about $181, but it has more features and options than the basic $29 dollar one which is very limited. If you just need to read codes, most auto parts stores will do that for you free (so they can sell you parts).

Hope that helps.

Jan 01, 2011 | 1997 Chevrolet S-10 Pickup

2 Answers

Brake pedal feels soft


I would have the brakes checked they may be low and need replacing, another thing is if the caliper slides are sticking and not allowing the caliper to move freely this will also cause a soft pedal because the caliper piston now needs to travel more before the pad hits the rotor so start with a brake inspection.

Aug 10, 2010 | 2001 Mercedes-Benz C-Class

1 Answer

I have 97 S10 4.3L my fuel gauge doesnt work.


just put a sending unit in it I have done tons of them...

Dec 06, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

I have a 1997 S10 Blazer 4X4. After thing warm up


Check your tranny fluid level. Make sure you have enough.

Nov 02, 2009 | 1997 Chevrolet Blazer

1 Answer

Scanner for a chevy 95 S10


Was it made in Canada? Late model 95 right? Its a OBDII, check the manufacture dates on the inside of the drivers door it will tell you.

Jul 12, 2009 | 2003 Chevrolet S-10

1 Answer

1997 Chevrolet S-10 Backup light bulb change


OPEN THE TAILGATE AND ON THE INSIDE OF THE LIGHT THERE ARE TWO SCREWS THAT HOLD THE LIGHT IN PLACE. REMOVE THE TWO SCREWS PER LIGHT AND PULL THE LENS STRAIGHT OUT. HOPE THIS SOLVES THE PROBLEM. LET ME KNOW. BEST OF LUCK.

Apr 29, 2009 | 1997 Chevrolet S-10 Pickup

2 Answers

No tail lights


Try checking the headlight switch it may have broken contacts in it. Easy fix go to a salvage yard find same make and model truck, swap headlight switches.

Dec 27, 2008 | 1997 Chevrolet S-10 Pickup

Not finding what you are looking for?
1998 Chevrolet S-10 Pickup Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...