How to reset perform service message - 2006 Chrysler Pacifica

The perform service message tells you when you need to change oil. To reset it turn the key on and press the step button until miles to service is displayed (it should say 0 underneath). Then press and hold the reset button until it changes from 0 to 3,000 miles. Then start the vehicle. The message should no longer be displayed.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

on the dash you have the buttons for the info center hit the next button until it says miles to next service and hold the reset button for a few seconds it should then read 3000 miles till next service

"perform service" have your mechanic reset it for the amount of mileage you would like to perform your next service...such as an oil chg in 3000 miles...

this light can come on even thought service is not actually due. if the service was performed and the light was not on at the time, sometimes you cannot reset them if they are not actually lit, or 99% of the time the technician forgets if the light was not on. stop by your shop and they can reset it for you in just a few moments, and for no charge. good luck!

This is a oil change reminder. Nothing fancy about, when you get your oil change go into the menu and click reset counter and it will go off. If there was something wrong with your car the check engine light would come on.

1) Turn key to position 2.
2) Press/release the R button to show the next service due light. Release button.
3) Turn key to Off.
4) Press and HOLD the same R button to view the service light, THEN, within 2 seconds, turn key to position 2.
5) Wait up to 10 second and the light will reset to show new service .

Let me know if this worked.

Actually the newer cherokees are a little more complicated, it's not a reminder for an oil change. It is for an emssions service that should be performed according to the dealer. Here is the rest procedure

Turn ignition to on position, but do not start.
Depress brake pedal fully twice.
depress excellerator very slowly twice
Turn ignition off & that will reset the perform service indicator.
I am mechanic & we are getting frustrated because the dealers do not want to release this info to anyone, they want your money! Can you believe if you did not get them to perform the service they charge you a 1 hour shop rate??

Should be able to reset it through the overhead console if it is for the engine oil. If it is for something else, and the light is still on, it is not fixed.

To reset the perform service message , is as follows , turn ignition switch to the ON position , depress and release MENU push button until SERVICE INTV . = is displayed , press and release STEP button to step through available options. the last selected distance option displayed becomes the service interval at which the PERFORM SERVICE message will be displayed . if a new distance interval is selected , RESET SERVICE DISTANCE ? with a yes or no option. when yes is selected the accumulated distance since the last previous PERFORM SERVICE message will be set to zero because the service interval has been changed . when NO is selected , the distance until the next PERFORM SERVICE message is reduced by the accumulated distance since the last previous message . EVIC exits programming mode and returns to its normal operation mode when the C/T button is depressed or when the end of the programmable feature menu list is reached , whichever comes first .

Thanks for asking .

It is the perform service indicator that is telling you it is time for service.
If you do not want to have car serviced right now, just just hit the reset button. You can also go thru the menu and set the mileage you want the Perform Service warning to come on.